Score
| 42.74% * |
|
|
|
System Information
| Target Hostname: | DC01 |
| Operating System: | Microsoft Windows Server 2025 Standard Evaluation |
| OS Version: | 24H2 |
| Domain: | lab.local |
| FQDN: | DC01.lab.local |
| Processor: | Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz |
| Processor Architecture: | Intel64 Family 6 Model 158 Stepping 9 |
| Processor Speed: | 3600 mhz |
| Physical Memory: | 4096 mb |
| Manufacturer: | VMware, Inc. |
| Model: | VMware20,1 |
| Serial Number: | VMware-56 4d 9c d6 ae ea fb 9d-d6 fa 48 c4 b3 c5 12 8a |
| BIOS Version: | VMW201.00V.25275966.B64.2603102050 |
| Interfaces: |
|
Content Information
| Stream: | MS_Windows_Server_2025_STIG | ||||||
| Profile: |
| ||||||
| Digital Signature Status: | VALID | ||||||
| Digital Signature Validation Date: | 2026-09-18T18:31:41 | ||||||
| Stream Installation Date: | 2026-08-27 | ||||||
| Status: | accepted (2026-08-26) | ||||||
| Title: | Microsoft Windows Server 2025 STIG SCAP Benchmark - NIWC Enhanced with Manual Questions | ||||||
| Description: | This Security Technical Implementation Guide is published as a tool to improve the security of Department of War (DoW) information systems. The requirements are derived from the National Institute of Standards and Technology (NIST) 800-53 and related documents. Comments or proposed revisions to this document should be sent via email to the following address: disa.stig_spt@mail.mil. | ||||||
| Notice: | Portions of this document were developed at Naval Information Warfare Center Atlantic by employees of the Federal Government in the course of their official duties. Pursuant to title 17 Section 105 of the United States Code this software is not subject to copyright protection and is in the public domain. The Government assumes no responsibility whatsoever for its use by other parties, and the software is provided "AS IS" without warranty or guarantee of any kind, express or implied, including, but not limited to, the warranties of merchantability and of fitness for a particular purpose. In no event shall the Government be liable for any claim, damages or other liability, whether in an action of contract, tort or other dealings in the software. The Government has no obligation hereunder to provide maintenance, support, updates, enhancements, or modifications. We would appreciate acknowledgement if the software is used. This software can be redistributed and/or modified freely provided that any derivative works bear some notice that they are derived from it, and any modified versions bear some notice that they have been modified. | ||||||
| Front-Matter: | This content stream was enhanced with OCIL manual questions derived from the STIG Manual by the NIWC SCC team. Timestamp: 2026-08-26T17:35:51.634841+00:00 Tool Version: 2.0 STIG Manual Version: 1 SCAP Benchmark Version: 001.001 Total Rules: 291 DISA Automated Rules: 225 NIST Automated Rules: 0 NIWC Automated Rules: 36 Manual rules added: 30 | ||||||
| Target Platform: | cpe:/o:microsoft:windows_server_2025:-::~~~~x64~ | ||||||
| Reference: |
| ||||||
| Stream Version: | 001.001.001 | ||||||
| Source OVAL Version: | 5.11 | ||||||
| Result OVAL Version: | 5.12.3 | ||||||
| Source OCIL Version: | 2.0 | ||||||
| Result OCIL Version: | 2.0 | ||||||
| Start Time: | 2026-09-18T18:32:18 | ||||||
| End Time: | 2026-09-18T18:35:09 | ||||||
| Scan Duration: | 00:02:51 | ||||||
| Scanner: | cpe:/a:niwc:scc:5.15 | ||||||
| Identity: | LAB\Administrator | ||||||
| Identity Privileged: | true | ||||||
| Identity Authenticated: | true | ||||||
| Release Info: | Enhanced Content 001.001.1 Date: 2026-08-26, based on Release: 3 Benchmark Date: 10 Aug 2026 |
Digital Signature Information
| Key Subject: | C=US, O=U.S. Government, OU=DoD, OU=PKI, OU=USN, CN=CS.NIWC-ATLANTIC.001 |
| Key Issuer: | C=US, O=U.S. Government, OU=DoD, OU=PKI, CN=DOD ID CA-71 |
| Key Validation Dates: | Feb 18 00:00:00 2025 GMT - Feb 17 23:59:59 2028 GMT |
Results: High Severity (CAT I)
- V-277997 - Windows Server 2025 local volumes must use a format that supports New Technology File System (NTFS) attributes. - Pass
- V-278040 - Windows Server 2025 reversible password encryption must be disabled. - Pass
- V-278099 - Windows Server 2025 AutoPlay must be turned off for nonvolume devices. - Fail
- V-278100 - Windows Server 2025 default AutoRun behavior must be configured to prevent AutoRun commands. - Fail
- V-278101 - Windows Server 2025 AutoPlay must be disabled for all drives. - Fail
- V-278121 - Windows Server 2025 must disable the Windows Installer Always install with elevated privileges option. - Fail
- V-278125 - Windows Server 2025 Windows Remote Management (WinRM) client must not use Basic authentication. - Fail
- V-278128 - Windows Server 2025 Windows Remote Management (WinRM) service must not use Basic authentication. - Fail
- V-278138 - Windows Server 2025 permissions on the Active Directory data files must only allow system administrators (SAs) access. - Fail
- V-278139 - Windows Server 2025 Active Directory SYSVOL directory must have the proper access control permissions. - Pass
- V-278140 - Windows Server 2025 Active Directory (AD) Group Policy Objects (GPOs) must have proper access control permissions. - Pass
- V-278141 - Windows Server 2025 Active Directory Domain Controllers Organizational Unit (OU) object must have the proper access control permissions. - Pass
- V-278142 - Windows Server 2025 organization created Active Directory Organizational Unit (OU) objects must have proper access control permissions. - Fail
- V-278146 - Windows Server 2025 directory data (outside the root DSE) of a nonpublic directory must be configured to prevent anonymous access. - Pass
- V-278190 - Windows Server 2025 must be running Credential Guard on domain-joined member servers. - Not Applicable
- V-278196 - Windows Server 2025 must prevent local accounts with blank passwords from being used from the network. - Pass
- V-278215 - Windows Server 2025 must not allow anonymous SID/Name translation. - Pass
- V-278216 - Windows Server 2025 must not allow anonymous enumeration of Security Account Manager (SAM) accounts. - Pass
- V-278217 - Windows Server 2025 must not allow anonymous enumeration of shares. - Fail
- V-278219 - Windows Server 2025 must restrict anonymous access to Named Pipes and Shares. - Pass
- V-278225 - Windows Server 2025 LAN Manager authentication level must be configured to send NTLMv2 response only and to refuse LM and NTLM. - Fail
- V-278242 - The Windows Server 2025 "Act as part of the operating system" user right must not be assigned to any groups or accounts. - Pass
- V-278246 - The Windows Server 2025 "Create a token object" user right must not be assigned to any groups or accounts. - Pass
- V-278250 - The Windows Server 2025 "Debug programs" user right must only be assigned to the Administrators group. - Pass
- V-285316 - Windows Server 2025 OpenSSH must not allow blank passwords. - Fail
- V-277987 - Windows Server 2025 administrative accounts must not be used with applications that access the internet, such as web browsers, or with potential internet sources, such as email. - Not Checked
- V-278009 - Windows Server 2025 systems requiring data-at-rest protections must employ cryptographic mechanisms to prevent unauthorized disclosure and modification of the information at rest. - Not Checked
- V-278132 - Windows Server 2025 must only allow administrators responsible for the domain controller to have Administrator rights on the system. - Not Checked
- V-278160 - Windows Server 2025 domain Controller PKI certificates must be issued by the DoW PKI or an approved External Certificate Authority (ECA). - Not Checked
- V-278161 - Windows Server 2025 PKI certificates associated with user accounts must be issued by a DoW PKI or an approved External Certificate Authority (ECA). - Not Checked
- V-278177 - Windows Server 2025 must only allow administrators responsible for the member server or stand-alone or nondomain-joined system to have Administrator rights on the system. - Not Applicable
Automated Checks
Manual Checks
Results: Medium Severity (CAT II)
- V-277986 - Windows Server 2025 passwords for the built-in Administrator account must be changed at least every 60 days. - Not Applicable
- V-277989 - Windows Server 2025 manually managed application account passwords must be at least 15 characters in length. - Fail
- V-277993 - Windows Server 2025 systems must have a Trusted Platform Module (TPM) enabled and ready for use. - Fail
- V-277998 - Windows Server 2025 permissions for the system drive root directory (usually C:\) must conform to minimum requirements. - Pass
- V-277999 - Windows Server 2025 permissions for program file directories must conform to minimum requirements. - Pass
- V-278000 - Windows Server 2025 permissions for the Windows installation directory must conform to minimum requirements. - Pass
- V-278001 - Windows Server 2025 default permissions for the HKEY_LOCAL_MACHINE registry hive must be maintained. - Pass
- V-278004 - Windows Server 2025 accounts must require passwords. - Pass
- V-278005 - Windows Server 2025 passwords must be configured to expire. - Fail
- V-278008 - Windows Server 2025 must have software certificate installation files removed. - Pass
- V-278015 - Windows Server 2025 must not have the Fax Server role installed. - Pass
- V-278016 - Windows Server 2025 must not have the Microsoft FTP service installed unless required by the organization. - Pass
- V-278018 - Windows Server 2025 must not have Bluetooth enabled unless required by the organization. - Pass
- V-278019 - Windows Server 2025 must not have the Peer Name Resolution Protocol installed. - Pass
- V-278020 - Windows Server 2025 must not have Simple TCP/IP Services installed. - Pass
- V-278021 - Windows Server 2025 must not have the Telnet Client installed. - Pass
- V-278022 - Windows Server 2025 must not have the TFTP Client installed. - Pass
- V-278023 - Windows Server 2025 must not have the Server Message Block (SMB) v1 protocol installed. - Pass
- V-278024 - Windows Server 2025 must have the Server Message Block (SMB) v1 protocol disabled on the SMB server. - Pass
- V-278025 - Windows Server 2025 must have the Server Message Block (SMB) v1 protocol disabled on the SMB client. - Pass
- V-278026 - Windows Server 2025 must not have Windows PowerShell 2.0 installed. - Pass
- V-278027 - Windows Server 2025 FTP servers must be configured to prevent anonymous logons. - Not Applicable
- V-278028 - Windows Server 2025 FTP servers must be configured to prevent access to the system drive. - Not Applicable
- V-278030 - Windows Server 2025 must have orphaned security identifiers (SIDs) removed from user rights. - Pass
- V-278031 - Windows Server 2025 systems must have Unified Extensible Firmware Interface (UEFI) firmware and be configured to run in UEFI mode, not Legacy BIOS. - Pass
- V-278032 - Windows Server 2025 must have Secure Boot enabled. - Fail
- V-278033 - Windows Server 2025 account lockout duration must be configured to 15 minutes or greater. - Fail
- V-278034 - Windows Server 2025 must have the number of allowed bad logon attempts configured to three or less. - Fail
- V-278035 - Windows Server 2025 must have the period of time before the bad logon counter is reset configured to 15 minutes or greater. - Fail
- V-278036 - Windows Server 2025 password history must be configured to 24 passwords remembered. - Pass
- V-278037 - Windows Server 2025 maximum password age must be configured to 60 days or less. - Pass
- V-278038 - Windows Server 2025 minimum password age must be configured to at least one day. - Pass
- V-278039 - Windows Server 2025 must have the built-in Windows password complexity policy enabled. - Pass
- V-278043 - Windows Server 2025 permissions for the Application event log must prevent access by nonprivileged accounts. - Pass
- V-278044 - Windows Server 2025 permissions for the Security event log must prevent access by nonprivileged accounts. - Pass
- V-278045 - Windows Server 2025 permissions for the System event log must prevent access by nonprivileged accounts. - Pass
- V-278046 - Windows Server 2025 Event Viewer must be protected from unauthorized modification and deletion. - Pass
- V-278047 - Windows Server 2025 must be configured to audit Account Logon - Credential Validation successes. - Pass
- V-278048 - Windows Server 2025 must be configured to audit Account Logon - Credential Validation failures. - Fail
- V-278049 - Windows Server 2025 must be configured to audit Account Management - Other Account Management Events successes. - Fail
- V-278050 - Windows Server 2025 must be configured to audit Account Management - Security Group Management successes. - Pass
- V-278051 - Windows Server 2025 must be configured to audit Account Management - User Account Management successes. - Pass
- V-278052 - Windows Server 2025 must be configured to audit Account Management - User Account Management failures. - Fail
- V-278053 - Windows Server 2025 must be configured to audit Detailed Tracking - Plug and Play Events successes. - Fail
- V-278054 - Windows Server 2025 must be configured to audit Detailed Tracking - Process Creation successes. - Fail
- V-278055 - Windows Server 2025 must be configured to audit Logon/Logoff - Account Lockout successes. - Pass
- V-278056 - Windows Server 2025 must be configured to audit Logon/Logoff - Account Lockout failures. - Fail
- V-278057 - Windows Server 2025 must be configured to audit Logon/Logoff - Group Membership successes. - Fail
- V-278058 - Windows Server 2025 must be configured to audit logoff successes. - Pass
- V-278059 - Windows Server 2025 must be configured to audit logon successes. - Pass
- V-278060 - Windows Server 2025 must be configured to audit logon failures. - Pass
- V-278061 - Windows Server 2025 must be configured to audit Logon/Logoff - Special Logon successes. - Pass
- V-278062 - Windows Server 2025 must be configured to audit Object Access - Other Object Access Events successes. - Fail
- V-278063 - Windows Server 2025 must be configured to audit Object Access - Other Object Access Events failures. - Fail
- V-278064 - Windows Server 2025 must be configured to audit Object Access - Removable Storage successes. - Fail
- V-278065 - Windows Server 2025 must be configured to audit Object Access - Removable Storage failures. - Fail
- V-278066 - Windows Server 2025 must be configured to audit Policy Change - Audit Policy Change successes. - Pass
- V-278067 - Windows Server 2025 must be configured to audit Policy Change - Audit Policy Change failures. - Fail
- V-278068 - Windows Server 2025 must be configured to audit Policy Change - Authentication Policy Change successes. - Pass
- V-278069 - Windows Server 2025 must be configured to audit Policy Change - Authorization Policy Change successes. - Fail
- V-278070 - Windows Server 2025 must be configured to audit Privilege Use - Sensitive Privilege Use successes. - Fail
- V-278071 - Windows Server 2025 must be configured to audit Privilege Use - Sensitive Privilege Use failures. - Fail
- V-278072 - Windows Server 2025 must be configured to audit System - IPsec Driver successes. - Fail
- V-278073 - Windows Server 2025 must be configured to audit System - IPsec Driver failures. - Fail
- V-278074 - Windows Server 2025 must be configured to audit System - Other System Events successes. - Pass
- V-278075 - Windows Server 2025 must be configured to audit System - Other System Events failures. - Pass
- V-278076 - Windows Server 2025 must be configured to audit System - Security State Change successes. - Pass
- V-278077 - Windows Server 2025 must be configured to audit System - Security System Extension successes. - Fail
- V-278078 - Windows Server 2025 must be configured to audit System - System Integrity successes. - Pass
- V-278079 - Windows Server 2025 must be configured to audit System - System Integrity failures. - Pass
- V-278080 - Windows Server 2025 must prevent the display of slide shows on the lock screen. - Fail
- V-278086 - Windows Server 2025 insecure logons to an SMB server must be disabled. - Fail
- V-278087 - Windows Server 2025 hardened Universal Naming Convention (UNC) paths must be defined to require mutual authentication and integrity for at least the \\*\SYSVOL and \\*\NETLOGON shares. - Fail
- V-278088 - Windows Server 2025 command line data must be included in process creation events. - Fail
- V-278089 - Windows Server 2025 must be configured to enable Remote host allows delegation of nonexportable credentials. - Fail
- V-278090 - Windows Server 2025 virtualization-based security must be enabled with the platform security level configured to Secure Boot or Secure Boot with DMA Protection. - Fail
- V-278091 - Windows Server 2025 Early Launch Antimalware, Boot-Start Driver Initialization Policy must prevent boot drivers identified as bad. - Pass
- V-278092 - Windows Server 2025 group policy objects must be reprocessed even if they have not changed. - Not Applicable
- V-278093 - Windows Server 2025 downloading print driver packages over HTTP must be turned off. - Fail
- V-278094 - Windows Server 2025 printing over HTTP must be turned off. - Fail
- V-278095 - Windows Server 2025 network selection user interface (UI) must not be displayed on the logon screen. - Fail
- V-278096 - Windows Server 2025 users must be prompted to authenticate when the system wakes from sleep (on battery). - Fail
- V-278097 - Windows Server 2025 users must be prompted to authenticate when the system wakes from sleep (plugged in). - Fail
- V-278102 - Windows Server 2025 administrator accounts must not be enumerated during elevation. - Fail
- V-278103 - Windows Server 2025 Telemetry must be configured to limit diagnostic data sent to Microsoft. - Fail
- V-278105 - Windows Server 2025 Application event log size must be configured to 32768 KB or greater. - Fail
- V-278106 - Windows Server 2025 Security event log size must be configured to a value that holds at least one week of audit records. - Fail
- V-278107 - Windows Server 2025 System event log size must be configured to 32768 KB or greater. - Fail
- V-278108 - Windows Server 2025 Microsoft Defender antivirus SmartScreen must be enabled. - Fail
- V-278109 - Windows Server 2025 Explorer Data Execution Prevention must be enabled. - Pass
- V-278111 - Windows Server 2025 File Explorer shell protocol must run in protected mode. - Pass
- V-278112 - Windows Server 2025 must not save passwords in the Remote Desktop Client. - Fail
- V-278113 - Windows Server 2025 Remote Desktop Services must prevent drive redirection. - Fail
- V-278114 - Windows Server 2025 Remote Desktop Services must always prompt a client for passwords upon connection. - Fail
- V-278115 - Windows Server 2025 Remote Desktop Services must require secure Remote Procedure Call (RPC) communications. - Fail
- V-278116 - Windows Server 2025 Remote Desktop Services must be configured with the client connection encryption set to High Level. - Fail
- V-278117 - Windows Server 2025 must prevent attachments from being downloaded from RSS feeds. - Fail
- V-278118 - Windows Server 2025 must disable Basic authentication for RSS feeds over HTTP. - Pass
- V-278119 - Windows Server 2025 must prevent Indexing of encrypted files. - Fail
- V-278120 - Windows Server 2025 must prevent users from changing installation options. - Fail
- V-278122 - Windows Server 2025 users must be notified if a web-based program attempts to install software. - Pass
- V-278123 - Windows Server 2025 must disable automatically signing in the last interactive user after a system-initiated restart. - Pass
- V-278124 - Windows Server 2025 PowerShell script block logging must be enabled. - Fail
- V-278126 - Windows Server 2025 Windows Remote Management (WinRM) client must not allow unencrypted traffic. - Fail
- V-278127 - Windows Server 2025 Windows Remote Management (WinRM) client must not use Digest authentication. - Fail
- V-278129 - Windows Server 2025 Windows Remote Management (WinRM) service must not allow unencrypted traffic. - Fail
- V-278130 - Windows Server 2025 Windows Remote Management (WinRM) service must not store RunAs credentials. - Fail
- V-278131 - Windows Server 2025 must have PowerShell Transcription enabled. - Fail
- V-278133 - Windows Server 2025 Kerberos user logon restrictions must be enforced. - Pass
- V-278134 - Windows Server 2025 Kerberos service ticket maximum lifetime must be limited to 600 minutes or less. - Pass
- V-278135 - Windows Server 2025 Kerberos user ticket lifetime must be limited to 10 hours or less. - Pass
- V-278136 - Windows Server 2025 Kerberos policy user ticket renewal maximum lifetime must be limited to seven days or less. - Pass
- V-278137 - Windows Server 2025 computer clock synchronization tolerance must be limited to five minutes or less. - Pass
- V-278143 - Windows Server 2025 data files owned by users must be on a different logical partition from the directory server data files. - Pass
- V-278148 - Windows Server 2025 Active Directory Group Policy Objects (GPOs) must be configured with proper audit settings. - Fail
- V-278149 - Windows Server 2025 Active Directory (AD) Domain object must be configured with proper audit settings. - Fail
- V-278150 - Windows Server 2025 Active Directory (AD) Infrastructure object must be configured with proper audit settings. - Fail
- V-278151 - Windows Server 2025 Active Directory (AD) Domain Controllers Organizational Unit (OU) object must be configured with proper audit settings. - Fail
- V-278152 - Windows Server 2025 Active Directory (AD) AdminSDHolder object must be configured with proper audit settings. - Fail
- V-278153 - Windows Server 2025 Active Directory (AD) RID Manager$ object must be configured with proper audit settings. - Fail
- V-278154 - Windows Server 2025 must be configured to audit Account Management - Computer Account Management successes. - Pass
- V-278155 - Windows Server 2025 must be configured to audit DS Access - Directory Service Access successes. - Pass
- V-278156 - Windows Server 2025 must be configured to audit DS Access - Directory Service Access failures. - Fail
- V-278157 - Windows Server 2025 must be configured to audit DS Access - Directory Service Changes successes. - Fail
- V-278158 - Windows Server 2025 must be configured to audit DS Access - Directory Service Changes failures. - Fail
- V-278159 - Windows Server 2025 domain controllers must have a PKI server certificate. - Fail
- V-278162 - Windows Server 2025 Active Directory (AD) user accounts, including administrators, must be configured to require the use of a common access card (CAC), Personal Identity Verification (PIV)-compliant hardware token, or Alternate Logon Token (ALT) for user authentication. - Fail
- V-278163 - Windows Server 2025 domain controllers must require LDAP access signing. - Fail
- V-278164 - Windows Server 2025 domain controllers must be configured to allow reset of machine account passwords. - Fail
- V-278165 - The Windows Server 2025 "Access this computer from the network" user right must only be assigned to the Administrators, Authenticated Users, and Enterprise Domain Controllers groups on domain controllers. - Fail
- V-278166 - The Windows Server 2025 "Add workstations to domain" user right must only be assigned to the Administrators group on domain controllers. - Fail
- V-278167 - The Windows Server 2025 "Allow log on through Remote Desktop Services" user right must only be assigned to the Administrators group on domain controllers. - Pass
- V-278168 - The Windows Server 2025 "Deny access to this computer from the network" user right on domain controllers must be configured to prevent unauthenticated access. - Fail
- V-278169 - The Windows Server 2025 "Deny log on as a batch job" user right on domain controllers must be configured to prevent unauthenticated access. - Fail
- V-278170 - The Windows Server 2025 "Deny log on as a service" user right must be configured to include no accounts or groups (blank) on domain controllers. - Pass
- V-278171 - The Windows Server 2025 "Deny log on locally" user right on domain controllers must be configured to prevent unauthenticated access. - Fail
- V-278173 - Windows Server 2025 must be configured for name-based strong mappings for certificates. - Fail
- V-278174 - The Windows Server 2025 "Deny log on through Remote Desktop Services" user right on domain controllers must be configured to prevent unauthenticated access. - Fail
- V-278175 - The Windows Server 2025 "Enable computer and user accounts to be trusted for delegation" user right must only be assigned to the Administrators group on domain controllers. - Pass
- V-278176 - The password for the krbtgt account on a domain must be reset at least every 180 days. - Pass
- V-278178 - Windows Server 2025 local administrator accounts must have their privileged token filtered to prevent elevated privileges from being used over the network on domain-joined member servers. - Not Applicable
- V-278179 - Windows Server 2025 local users on domain-joined member servers must not be enumerated. - Not Applicable
- V-278180 - Windows Server 2025 must restrict unauthenticated Remote Procedure Call (RPC) clients from connecting to the RPC server on domain-joined member servers and stand-alone or nondomain-joined systems. - Not Applicable
- V-278181 - Windows Server 2025 must limit the caching of logon credentials to four or less on domain-joined member servers. - Not Applicable
- V-278182 - Windows Server 2025 must restrict remote calls to the Security Account Manager (SAM) to Administrators on domain-joined member servers and stand-alone or nondomain-joined systems. - Not Applicable
- V-278183 - Windows Server 2025 "Access this computer from the network" user right must only be assigned to the Administrators and Authenticated Users groups on domain-joined member servers and stand-alone or nondomain-joined systems. - Not Applicable
- V-278184 - The Windows Server 2025 "Deny access to this computer from the network" user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and local accounts and from unauthenticated access on all systems. - Not Applicable
- V-278185 - Windows Server 2025 Deny log on as a batch job user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and from unauthenticated access on all systems. - Not Applicable
- V-278186 - The Windows Server 2025 "Deny log on as a service" user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts. No other groups or accounts must be assigned this right. - Not Applicable
- V-278187 - The Windows Server 2025 "Deny log on locally" user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and from unauthenticated access on all systems. - Not Applicable
- V-278188 - The Windows Server 2025 "Deny log on through Remote Desktop Services" user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and all local accounts and from unauthenticated access on all systems. - Not Applicable
- V-278189 - The Windows Server 2025 "Enable computer and user accounts to be trusted for delegation" user right must not be assigned to any groups or accounts on domain-joined member servers and stand-alone or nondomain-joined systems. - Not Applicable
- V-278192 - Windows Server 2025 must have the DoW Root Certificate Authority (CA) certificates installed in the Trusted Root Store. - Fail
- V-278193 - Windows Server 2025 must have the DoW Interoperability Root Certificate Authority (CA) cross-certificates installed in the Untrusted Certificates Store on unclassified systems. - Fail
- V-278194 - Windows Server 2025 must have the US DoW CCEB Interoperability Root CA cross-certificates in the Untrusted Certificates Store on unclassified systems. - Fail
- V-278195 - Windows Server 2025 must have the built-in guest account disabled. - Pass
- V-278197 - The Windows Server 2025 built-in administrator account must be renamed. - Not Applicable
- V-278198 - The Windows Server 2025 built-in guest account must be renamed. - Not Applicable
- V-278199 - Windows Server 2025 must force audit policy subcategory settings to override audit policy category settings. - Fail
- V-278200 - The Windows Server 2025 setting Domain member: Digitally encrypt or sign secure channel data (always) must be configured to Enabled. - Pass
- V-278201 - Windows Server 2025 setting Domain member: Digitally encrypt secure channel data (when possible) must be configured to Enabled. - Pass
- V-278202 - The Windows Server 2025 setting Domain member: Digitally sign secure channel data (when possible) must be configured to Enabled. - Pass
- V-278203 - Windows Server 2025 computer account password must not be prevented from being reset. - Pass
- V-278204 - Windows Server 2025 maximum age for machine account passwords must be configured to 30 days or less. - Not Applicable
- V-278205 - Windows Server 2025 must be configured to require a strong session key. - Pass
- V-278206 - Windows Server 2025 machine inactivity limit must be set to 15 minutes or less, locking the system with the screen saver. - Fail
- V-278207 - The Windows Server 2025 required legal notice must be configured to display before console logon. - Fail
- V-278209 - The Windows Server 2025 Smart Card removal option must be configured to Force Logoff or Lock Workstation. - Fail
- V-278210 - The Windows Server 2025 setting Microsoft network client: Digitally sign communications (always) must be configured to Enabled. - Fail
- V-278211 - The Windows Server 2025 setting Microsoft network client: Digitally sign communications (if server agrees) must be configured to Enabled. - Pass
- V-278212 - Windows Server 2025 unencrypted passwords must not be sent to third-party Server Message Block (SMB) servers. - Pass
- V-278213 - The Windows Server 2025 setting Microsoft network server: Digitally sign communications (always) must be configured to Enabled. - Pass
- V-278214 - The Windows Server 2025 setting Microsoft network server: Digitally sign communications (if client agrees) must be configured to Enabled. - Pass
- V-278218 - Windows Server 2025 must be configured to prevent anonymous users from having the same permissions as the Everyone group. - Pass
- V-278220 - Windows Server 2025 services using Local System that use Negotiate when reverting to NTLM authentication must use the computer identity instead of authenticating anonymously. - Fail
- V-278221 - Windows Server 2025 must prevent NTLM from falling back to a Null session. - Fail
- V-278222 - Windows Server 2025 must prevent PKU2U authentication using online identities. - Fail
- V-278223 - Windows Server 2025 Kerberos encryption types must be configured to prevent the use of DES and RC4 encryption suites. - Fail
- V-278226 - Windows Server 2025 must be configured to at least negotiate signing for LDAP client signing. - Pass
- V-278227 - Windows Server 2025 session security for NTLM SSP-based clients must be configured to require NTLMv2 session security and 128-bit encryption. - Fail
- V-278228 - Windows Server 2025 session security for NTLM SSP-based servers must be configured to require NTLMv2 session security and 128-bit encryption. - Fail
- V-278229 - Windows Server 2025 users must be required to enter a password to access private keys stored on the computer. - Fail
- V-278230 - Windows Server 2025 must be configured to use FIPS-compliant algorithms for encryption, hashing, and signing. - Fail
- V-278232 - Windows Server 2025 User Account Control (UAC) approval mode for the built-in Administrator must be enabled. - Fail
- V-278233 - Windows Server 2025 UIAccess applications must not be allowed to prompt for elevation without using the secure desktop. - Pass
- V-278234 - Windows Server 2025 User Account Control (UAC) must, at a minimum, prompt administrators for consent on the secure desktop. - Fail
- V-278235 - Windows Server 2025 User Account Control (UAC) must automatically deny standard user requests for elevation. - Fail
- V-278236 - Windows Server 2025 User Account Control (UAC) must be configured to detect application installations and prompt for elevation. - Pass
- V-278237 - Windows Server 2025 User Account Control (UAC) must only elevate UIAccess applications that are installed in secure locations. - Pass
- V-278238 - Windows Server 2025 User Account Control (UAC) must run all administrators in Admin Approval Mode, enabling UAC. - Pass
- V-278239 - Windows Server 2025 User Account Control (UAC) must virtualize file and registry write failures to per-user locations. - Pass
- V-278240 - Windows Server 2025 must preserve zone information when saving attachments. - Fail
- V-278241 - The Windows Server 2025 "Access Credential Manager as a trusted caller" user right must not be assigned to any groups or accounts. - Pass
- V-278243 - The Windows Server 2025 "Allow log on locally" user right must only be assigned to the Administrators group. - Fail
- V-278244 - The Windows Server 2025 "Back up files and directories" user right must only be assigned to the Administrators group. - Fail
- V-278245 - The Windows Server 2025 "Create a pagefile" user right must only be assigned to the Administrators group. - Pass
- V-278247 - The Windows Server 2025 "Create global objects" user right must only be assigned to Administrators, Service, Local Service, and Network Service. - Pass
- V-278248 - The Windows Server 2025 "Create permanent shared objects" user right must not be assigned to any groups or accounts. - Pass
- V-278249 - The Windows Server 2025 "Create symbolic links" user right must only be assigned to the Administrators group. - Pass
- V-278251 - The Windows Server 2025 "Force shutdown from a remote system" user right must only be assigned to the Administrators group. - Fail
- V-278252 - The Windows Server 2025 "Generate security audits" user right must only be assigned to Local Service and Network Service. - Fail
- V-278253 - The Windows Server 2025 "Impersonate a client after authentication" user right must only be assigned to Administrators, Service, Local Service, and Network Service. - Fail
- V-278254 - The Windows Server 2025 "Increase scheduling priority" user right must only be assigned to the Administrators group. - Fail
- V-278255 - The Windows Server 2025 "Load and unload device drivers" user right must only be assigned to the Administrators group. - Fail
- V-278256 - The Windows Server 2025 "Lock pages in memory" user right must not be assigned to any groups or accounts. - Pass
- V-278257 - The Windows Server 2025 "Manage auditing and security log" user right must only be assigned to the Administrators group. - Pass
- V-278258 - The Windows Server 2025 "Modify firmware environment values" user right must only be assigned to the Administrators group. - Pass
- V-278259 - The Windows Server 2025 "Perform volume maintenance tasks" user right must only be assigned to the Administrators group. - Pass
- V-278260 - The Windows Server 2025 "Profile single process" user right must only be assigned to the Administrators group. - Pass
- V-278261 - The Windows Server 2025 "Restore files and directories" user right must only be assigned to the Administrators group. - Fail
- V-278262 - The Windows Server 2025 "Take ownership of files or other objects" user right must only be assigned to the Administrators group. - Pass
- V-279918 - Windows Server 2025 must be configured to audit handle manipulation failures. - Fail
- V-279920 - Windows Server 2025 must be configured to audit registry failures. - Fail
- V-279921 - Windows Server 2025 must be configured to audit registry successes. - Fail
- V-279922 - Windows Server 2025 must be configured to audit sensitive privilege use successes. - Fail
- V-279923 - Windows Server 2025 must be configured to audit sensitive privilege use failures. - Fail
- V-285313 - Windows Server 2025 networked systems must have and implement OpenSSH to protect the confidentiality and integrity of transmitted and received information, as well as information during preparation for transmission. - Fail
- V-285314 - Windows Server 2025 OpenSSH must display the Standard Mandatory DoW Notice and Consent Banner before granting remote access to the system via an OpenSSH logon. - Fail
- V-285315 - Windows Server 2025 OpenSSH must accept public key authentication. - Fail
- V-285317 - Windows Server 2025 OpenSSH must force a frequent session key renegotiation for SSH connections to the server. - Fail
- V-285318 - Windows Server 2025 OpenSSH must be configured so that all network connections associated with SSH traffic terminate after becoming unresponsive. - Fail
- V-285319 - Windows Server 2025 OpenSSH must be configured so that all network connections associated with SSH traffic are terminated after 10 minutes of becoming unresponsive. - Fail
- V-285320 - The Windows Server 2025 OpenSSH configuration file must conform to minimum requirements. - Fail
- V-285321 - Windows Server 2025 OpenSSH private host key files must conform to minimum requirements. - Fail
- V-285322 - Windows Server 2025 OpenSSH public host key files must conform to minimum requirements. - Fail
- V-285323 - Windows Server 2025 OpenSSH must not allow GSSAPI authentication. - Fail
- V-277982 - Windows Server 2025 must install security-relevant software updates within 30 days unless the time period is directed by an authoritative source (e.g., IAVM, CTOs, DTMs, STIGs). - Not Checked
- V-277983 - Windows Server 2025 must prohibit the use or connection of unauthorized hardware components. - Not Checked
- V-277985 - Windows Server 2025 users with administrative privileges must have separate accounts for administrative duties and normal operational tasks. - Not Checked
- V-277988 - Windows Server 2025 members of the Backup Operators group must have separate accounts for backup duties and normal operational tasks. - Not Checked
- V-277990 - Windows Server 2025 manually managed application account passwords must be changed at least annually or when a system administrator with knowledge of the password leaves the organization. - Not Checked
- V-277991 - Windows Server 2025 shared user accounts must not be permitted. - Not Checked
- V-277992 - Windows Server 2025 must employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs. - Not Checked
- V-277995 - Windows Server 2025 must use an antivirus program. - Not Checked
- V-277996 - Windows Server 2025 must have a host-based intrusion detection and prevention service (IDPS) installed. - Not Checked
- V-278003 - Outdated or unused accounts on Windows Server 2025 must be removed or disabled. - Not Checked
- V-278006 - Windows Server 2025 system files must be monitored for unauthorized changes. - Not Checked
- V-278007 - Windows Server 2025 nonsystem-created file shares must limit access to groups that require it. - Not Checked
- V-278010 - Windows Server 2025 must implement protection methods such as TLS, encrypted VPNs, or IPsec if the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process. - Not Checked
- V-278011 - Windows Server 2025 must have the roles and features required by the system documented. - Not Checked
- V-278012 - Windows Server 2025 must have a host-based firewall installed and enabled. - Not Checked
- V-278013 - Windows Server 2025 must automatically remove or disable temporary user accounts after 72 hours. - Not Checked
- V-278014 - Windows Server 2025 must automatically remove or disable emergency accounts after the crisis is resolved or within 72 hours. - Not Checked
- V-278017 - Windows Server 2025 must not have Wi-Fi enabled unless required by the organization. - Not Checked
- V-278041 - Windows Server 2025 audit records must be backed up to a different system or media than the system being audited. - Not Checked
- V-278042 - Windows Server 2025 must, at a minimum, off-load audit records of interconnected systems in real time and off-load stand-alone or nondomain-joined systems weekly. - Not Checked
- V-278144 - Windows Server 2025 domain controllers must run on a machine dedicated to that function. - Not Checked
- V-278145 - Windows Server 2025 must use separate, NSA-approved (Type 1) cryptography to protect the directory data in transit for directory service implementations at a classified confidentiality level when replication data traverses a network cleared to a lower level than the data. - Not Checked
Automated Checks
Manual Checks
Results: Low Severity (CAT III)
- V-278082 - Windows Server 2025 Internet Protocol version 6 (IPv6) source routing must be configured to the highest protection level to prevent IP source routing. - Fail
- V-278083 - Windows Server 2025 source routing must be configured to the highest protection level to prevent Internet Protocol (IP) source routing. - Fail
- V-278084 - Windows Server 2025 must be configured to prevent Internet Control Message Protocol (ICMP) redirects from overriding Open Shortest Path First (OSPF)-generated routes. - Fail
- V-278085 - Windows Server 2025 must be configured to ignore NetBIOS name release requests except from WINS servers. - Fail
- V-278098 - Windows Server 2025 Application Compatibility Program Inventory must be prevented from collecting data and sending the information to Microsoft. - Fail
- V-278104 - Windows Server 2025 Windows Update must not obtain updates from other PCs on the internet. - Fail
- V-278110 - Windows Server 2025 Turning off File Explorer heap termination on corruption must be disabled. - Pass
- V-278147 - Windows Server 2025 directory service must be configured to terminate LDAP-based network connections to the directory server after five minutes of inactivity. - Fail
- V-278208 - Windows Server 2025 title for legal banner dialog box must be configured with the appropriate text. - Fail
- V-278231 - Windows Server 2025 default permissions of global system objects must be strengthened. - Pass
Automated Checks
Manual Checks
Detailed Results: High Severity (CAT I)
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT filesystem FROM win32_logicaldisk WHERE drivetype=3 AND filesystem!='NTFS' AND filesystem!='ReFS' AND filesystem!='CSVFS''
- namespace equals 'root\cimv2'
- wql equals 'SELECT filesystem FROM win32_logicaldisk WHERE drivetype=3 AND filesystem!='NTFS' AND filesystem!='ReFS' AND filesystem!='CSVFS''
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'reversible_encryption' must be equal to '0'
- max_passwd_age equals '3628800'
- min_passwd_age equals '86400'
- min_passwd_len equals '7'
- password_hist_len equals '24'
- password_complexity equals '1'
- reversible_encryption equals '0'
- anonymous_name_lookup equals '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\Explorer'
- check = 'name' must be equal to 'NoAutoplayfornonVolume'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Microsoft\Windows\CurrentVersion\Policies\Explorer'
- check = 'name' must be equal to 'NoAutorun'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer'
- check = 'name' must be equal to 'NoDriveTypeAutoRun'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '255'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\Installer'
- check = 'name' must be equal to 'AlwaysInstallElevated'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\WinRM\Client'
- check = 'name' must be equal to 'AllowBasic'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\WinRM\Service'
- check = 'name' must be equal to 'AllowBasic'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must be equal to 'S-1-5-18'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must be equal to 'S-1-5-32-544'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must match the pattern '.*'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-18'
- standard_delete equals 'false'
- standard_read_control equals 'false'
- standard_write_dac equals 'false'
- standard_write_owner equals 'false'
- standard_synchronize equals 'false'
- generic_read equals 'false'
- generic_write equals 'false'
- generic_execute equals 'false'
- file_read_data equals 'false'
- file_write_data equals 'false'
- file_append_data equals 'false'
- file_read_ea equals 'false'
- file_write_ea equals 'false'
- file_execute equals 'false'
- file_delete_child equals 'false'
- file_read_attributes equals 'false'
- file_write_attributes equals 'false'
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must be equal to 'S-1-5-18'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must be equal to 'S-1-5-32-544'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must match the pattern '.*'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-18'
- standard_delete equals 'false'
- standard_read_control equals 'false'
- standard_write_dac equals 'false'
- standard_write_owner equals 'false'
- standard_synchronize equals 'false'
- generic_read equals 'false'
- generic_write equals 'false'
- generic_execute equals 'false'
- file_read_data equals 'false'
- file_write_data equals 'false'
- file_append_data equals 'false'
- file_read_ea equals 'false'
- file_write_ea equals 'false'
- file_execute equals 'false'
- file_delete_child equals 'false'
- file_read_attributes equals 'false'
- file_write_attributes equals 'false'
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must be equal to 'S-1-5-18'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must be equal to 'S-1-5-32-544'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- for path, all of the following must be true:
- path must be equal to 'C:\WINDOWS\NTDS'
- check = 'filename' must match the pattern '^(.*)$'
- check = 'trustee_sid' must match the pattern '.*'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-18'
- standard_delete equals 'false'
- standard_read_control equals 'false'
- standard_write_dac equals 'false'
- standard_write_owner equals 'false'
- standard_synchronize equals 'false'
- generic_read equals 'false'
- generic_write equals 'false'
- generic_execute equals 'false'
- file_read_data equals 'false'
- file_write_data equals 'false'
- file_append_data equals 'false'
- file_read_ea equals 'false'
- file_write_ea equals 'false'
- file_execute equals 'false'
- file_delete_child equals 'false'
- file_read_attributes equals 'false'
- file_write_attributes equals 'false'
- true (All child tests must be true. (AND))
- check = 'shell' must be equal to 'cmd'
- for command, the following must be true:
- command must be equal to 'icacls C:\WINDOWS\SYSVOL'
- check = 'pattern' must be equal to ':'
- check_existence = 'at_least_one_exists', check = all 'exit_status' must be equal to '0'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '(?i)NT AUTHORITY\\Authenticated Users:\(RX\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\Authenticated Users:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Server Operators:\(RX\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Server Operators:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(M,WDAC,WO\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(F\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)CREATOR OWNER:\(OI\)\(CI\)\(IO\)\(F\)'
State Requirement : stderr_line must not exist - shell equals 'cmd'
- command equals 'icacls C:\WINDOWS\SYSVOL'
- pattern equals ':'
- exit_status equals '0'
- stdout_line equals 'C:\WINDOWS\SYSVOL NT AUTHORITY\Authenticated Users:(RX)'
- stdout_line equals ' NT AUTHORITY\Authenticated Users:(OI)(CI)(IO)(GR,GE)'
- stdout_line equals ' BUILTIN\Server Operators:(RX)'
- stdout_line equals ' BUILTIN\Server Operators:(OI)(CI)(IO)(GR,GE)'
- stdout_line equals ' BUILTIN\Administrators:(M,WDAC,WO)'
- stdout_line equals ' BUILTIN\Administrators:(OI)(CI)(IO)(F)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(F)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F)'
- stdout_line equals ' CREATOR OWNER:(OI)(CI)(IO)(F)'
- true (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'Import-Module ActiveDirectory; $a='^SYSTEM$|^Domain Admins$|^Enterprise Admins$|^Administrators$|^Enterprise Domain Controllers$|^CREATOR OWNER$'; $s='^Authenticated Users$|^Domain Computers$'; $results=foreach($gpo in (Get-ADObject -Filter "objectClass -eq 'groupPolicyContainer'" -SearchBase (Get-ADDomain).SystemsContainer -Properties displayName)){$acl = (Get-Acl -Path "AD:\$($gpo.DistinguishedName)").Access; foreach($rule in $acl){$t = $rule.IdentityReference.Value.Split('\')[-1]; if(-not $t -or $t -match $a -or $t -match $s){continue}else{"GPO=$($gpo.displayName) | Status=FAIL | Reason=Unauthorized trustee $t holds explicit ACL entry on this GPO."}}}; if($results){$results}else{"GPO=All GPOs | Status=PASS | Reason=Delegation secure."}'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern 'Status=FAIL'
- shell equals 'powershell'
- command equals 'Import-Module ActiveDirectory; $a='^SYSTEM$|^Domain Admins$|^Enterprise Admins$|^Administrators$|^Enterprise Domain Controllers$|^CREATOR OWNER$'; $s='^Authenticated Users$|^Domain Computers$'; $results=foreach($gpo in (Get-ADObject -Filter "objectClass -eq 'groupPolicyContainer'" -SearchBase (Get-ADDomain).SystemsContainer -Properties displayName)){$acl = (Get-Acl -Path "AD:\$($gpo.DistinguishedName)").Access; foreach($rule in $acl){$t = $rule.IdentityReference.Value.Split('\')[-1]; if(-not $t -or $t -match $a -or $t -match $s){continue}else{"GPO=$($gpo.displayName) | Status=FAIL | Reason=Unauthorized trustee $t holds explicit ACL entry on this GPO."}}}; if($results){$results}else{"GPO=All GPOs | Status=PASS | Reason=Delegation secure."}'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'GPO=All GPOs | Status=PASS | Reason=Delegation secure.'
- true (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'Import-Module GroupPolicy; Import-Module ActiveDirectory; if (-not (Get-PSDrive -Name AD -ErrorAction SilentlyContinue)) { New-PSDrive -Name AD -PSProvider ActiveDirectory -Root "" -ErrorAction SilentlyContinue | Out-Null }; $dn = ([ADSI]"").distinguishedName; $AdminGroupRegex = 'SYSTEM|Domain Admins|Enterprise Admins|Builtin\\Administrators|Administrators|CREATOR OWNER|SELF|Key Admins|Enterprise Key Admins|Exchange Enterprise Servers|Exchange Servers|Exchange Windows Permissions|Exchange Trusted Subsystem'; $ModRightsRegex = 'Write|CreateChild|DeleteChild|GenericAll|GenericWrite|Delete'; $f = Get-Acl -Path "AD:OU=Domain Controllers,$dn" | Select-Object -ExpandProperty Access | Where-Object { $_.AccessControlType -eq 'Allow' -and $_.IdentityReference -notmatch $AdminGroupRegex -and $_.ActiveDirectoryRights.ToString() -match $ModRightsRegex } | Select-Object @{Name='IdentityReference';Expression={$_.IdentityReference.ToString()}}, @{Name='ActiveDirectoryRights';Expression={$_.ActiveDirectoryRights.ToString()}} -Unique | ForEach-Object { [PSCustomObject]@{ GPO = 'Domain Controllers OU'; Status = 'FAIL'; Reason = "Unauthorized Trustee '$($_.IdentityReference)' holds '$($_.ActiveDirectoryRights)' modification rights." } }; if ($f) { $f | Format-Table -AutoSize | Out-String -Width 4096 } else { [PSCustomObject]@{ GPO = 'Domain Controllers OU'; Status = 'PASS'; Reason = 'Delegation securely restricted to authorized administrative groups on Domain Controllers OU.' } | Format-Table -AutoSize | Out-String -Width 4096 }'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern ' FAIL '
- shell equals 'powershell'
- command equals 'Import-Module GroupPolicy; Import-Module ActiveDirectory; if (-not (Get-PSDrive -Name AD -ErrorAction SilentlyContinue)) { New-PSDrive -Name AD -PSProvider ActiveDirectory -Root "" -ErrorAction SilentlyContinue | Out-Null }; $dn = ([ADSI]"").distinguishedName; $AdminGroupRegex = 'SYSTEM|Domain Admins|Enterprise Admins|Builtin\\Administrators|Administrators|CREATOR OWNER|SELF|Key Admins|Enterprise Key Admins|Exchange Enterprise Servers|Exchange Servers|Exchange Windows Permissions|Exchange Trusted Subsystem'; $ModRightsRegex = 'Write|CreateChild|DeleteChild|GenericAll|GenericWrite|Delete'; $f = Get-Acl -Path "AD:OU=Domain Controllers,$dn" | Select-Object -ExpandProperty Access | Where-Object { $_.AccessControlType -eq 'Allow' -and $_.IdentityReference -notmatch $AdminGroupRegex -and $_.ActiveDirectoryRights.ToString() -match $ModRightsRegex } | Select-Object @{Name='IdentityReference';Expression={$_.IdentityReference.ToString()}}, @{Name='ActiveDirectoryRights';Expression={$_.ActiveDirectoryRights.ToString()}} -Unique | ForEach-Object { [PSCustomObject]@{ GPO = 'Domain Controllers OU'; Status = 'FAIL'; Reason = "Unauthorized Trustee '$($_.IdentityReference)' holds '$($_.ActiveDirectoryRights)' modification rights." } }; if ($f) { $f | Format-Table -AutoSize | Out-String -Width 4096 } else { [PSCustomObject]@{ GPO = 'Domain Controllers OU'; Status = 'PASS'; Reason = 'Delegation securely restricted to authorized administrative groups on Domain Controllers OU.' } | Format-Table -AutoSize | Out-String -Width 4096 }'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'GPO Status Reason '
- stdout_line equals '--- ------ ------ '
- stdout_line equals 'Domain Controllers OU PASS Delegation securely restricted to authorized administrative groups on Domain Controllers OU.'
- false (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'import-module GroupPolicy; $dn = ([ADSI]"").distinguishedName; $c = 0; $f = New-Object System.Collections.Generic.List[Object]; $AdminGroupRegex = 'SYSTEM|Domain Admins|Enterprise Admins|Builtin\\Administrators|Administrators|CREATOR OWNER|SELF|Key Admins|Enterprise Key Admins|Exchange Enterprise Servers|Exchange Servers|Exchange Windows Permissions|Exchange Trusted Subsystem'; $ReadOnlyGroupRegex = 'Authenticated Users|Pre-Windows 2000|Enterprise Domain Controllers|Everyone|Anonymous Logon'; $ModRightsRegex = 'Write|CreateChild|DeleteChild|GenericAll|GenericWrite|Delete'; :ouLoop foreach ($ou in (Get-ADOrganizationalUnit -Filter "Name -ne 'Domain Controllers'")) { $aces = Get-Acl -Path "AD:$($ou.DistinguishedName)" | Select-Object -ExpandProperty Access | Select-Object IdentityReference, ActiveDirectoryRights, AccessControlType -Unique; foreach ($ace in $aces) { if ($ace.AccessControlType -eq 'Deny') { continue }; if ($ace.IdentityReference -match $AdminGroupRegex) { continue }; if ($ace.ActiveDirectoryRights.ToString() -match $ModRightsRegex) { if ($c -ge 1000) { $f.Add([PSCustomObject]@{ GPO = 'WARNING'; Status = 'FAIL'; Reason = 'Maximum reporting threshold of 1000 failures reached. Further output truncated.' }); break ouLoop }; $f.Add([PSCustomObject]@{ GPO = $ou.Name; Status = 'FAIL'; Reason = "Unauthorized Trustee '$($ace.IdentityReference)' holds '$($ace.ActiveDirectoryRights)' modification rights." }); $c++ } } }; if ($f.Count -gt 0) { $f | Format-Table -AutoSize | Out-String -Width 4096 } else { [PSCustomObject]@{ GPO = 'Custom OUs'; Status = 'PASS'; Reason = 'Delegation securely restricted to authorized administrative groups on all custom OUs.' } | Format-Table -AutoSize | Out-String -Width 4096 }'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern ' FAIL '
- shell equals 'powershell'
- command equals 'import-module GroupPolicy; $dn = ([ADSI]"").distinguishedName; $c = 0; $f = New-Object System.Collections.Generic.List[Object]; $AdminGroupRegex = 'SYSTEM|Domain Admins|Enterprise Admins|Builtin\\Administrators|Administrators|CREATOR OWNER|SELF|Key Admins|Enterprise Key Admins|Exchange Enterprise Servers|Exchange Servers|Exchange Windows Permissions|Exchange Trusted Subsystem'; $ReadOnlyGroupRegex = 'Authenticated Users|Pre-Windows 2000|Enterprise Domain Controllers|Everyone|Anonymous Logon'; $ModRightsRegex = 'Write|CreateChild|DeleteChild|GenericAll|GenericWrite|Delete'; :ouLoop foreach ($ou in (Get-ADOrganizationalUnit -Filter "Name -ne 'Domain Controllers'")) { $aces = Get-Acl -Path "AD:$($ou.DistinguishedName)" | Select-Object -ExpandProperty Access | Select-Object IdentityReference, ActiveDirectoryRights, AccessControlType -Unique; foreach ($ace in $aces) { if ($ace.AccessControlType -eq 'Deny') { continue }; if ($ace.IdentityReference -match $AdminGroupRegex) { continue }; if ($ace.ActiveDirectoryRights.ToString() -match $ModRightsRegex) { if ($c -ge 1000) { $f.Add([PSCustomObject]@{ GPO = 'WARNING'; Status = 'FAIL'; Reason = 'Maximum reporting threshold of 1000 failures reached. Further output truncated.' }); break ouLoop }; $f.Add([PSCustomObject]@{ GPO = $ou.Name; Status = 'FAIL'; Reason = "Unauthorized Trustee '$($ace.IdentityReference)' holds '$($ace.ActiveDirectoryRights)' modification rights." }); $c++ } } }; if ($f.Count -gt 0) { $f | Format-Table -AutoSize | Out-String -Width 4096 } else { [PSCustomObject]@{ GPO = 'Custom OUs'; Status = 'PASS'; Reason = 'Delegation securely restricted to authorized administrative groups on all custom OUs.' } | Format-Table -AutoSize | Out-String -Width 4096 }'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'GPO Status Reason '
- stdout_line equals '--- ------ ------ '
- stdout_line equals 'Lab FAIL Unauthorized Trustee 'BUILTIN\Account Operators' holds 'CreateChild, DeleteChild' modification rights.'
- stdout_line equals 'Lab FAIL Unauthorized Trustee 'BUILTIN\Print Operators' holds 'CreateChild, DeleteChild' modification rights. '
- stdout_line equals 'Workstations FAIL Unauthorized Trustee 'BUILTIN\Account Operators' holds 'CreateChild, DeleteChild' modification rights.'
- stdout_line equals 'Workstations FAIL Unauthorized Trustee 'BUILTIN\Print Operators' holds 'CreateChild, DeleteChild' modification rights. '
- stdout_line equals 'Servers FAIL Unauthorized Trustee 'BUILTIN\Account Operators' holds 'CreateChild, DeleteChild' modification rights.'
- stdout_line equals 'Servers FAIL Unauthorized Trustee 'BUILTIN\Print Operators' holds 'CreateChild, DeleteChild' modification rights. '
- stdout_line equals 'Users FAIL Unauthorized Trustee 'BUILTIN\Account Operators' holds 'CreateChild, DeleteChild' modification rights.'
- stdout_line equals 'Users FAIL Unauthorized Trustee 'BUILTIN\Print Operators' holds 'CreateChild, DeleteChild' modification rights. '
- stdout_line equals 'ServiceAccounts FAIL Unauthorized Trustee 'BUILTIN\Account Operators' holds 'CreateChild, DeleteChild' modification rights.'
- stdout_line equals 'ServiceAccounts FAIL Unauthorized Trustee 'BUILTIN\Print Operators' holds 'CreateChild, DeleteChild' modification rights. '
- true (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$( try { $obj=Get-ADObject -Filter "objectClass -eq 'nTDSService'" -Properties dsHeuristics -SearchBase "CN=Services,$((Get-ADRootDSE).configurationNamingContext)" -ErrorAction Stop; if ($null -eq $obj) { throw } $h=$obj.dsHeuristics; if ($null -eq $h) { [PSCustomObject]@{ Status='PASS'; Detail='dsHeuristics attribute is not set (Defaults secure)' } } else { $isAnon=($h.Length -ge 7) -and ($h[6] -eq '2'); $stat=if($isAnon){'FAIL'}else{'PASS'}; $msg=if($isAnon){'Allows Anonymous Access'}else{'Secure'}; $c=if($h.Length -ge 7){$h[6]}else{'N/A'}; [PSCustomObject]@{ Status=$stat; Detail=("dsHeuristics value is [{0}]. Seventh char is '{1}' ({2})." -f $h,$c,$msg) } } } catch { [PSCustomObject]@{ Status='ERROR'; Detail="Directory Service object could not be located or read." } } ) | Out-String -Width 4096'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern 'FAIL'
- shell equals 'powershell'
- command equals '$( try { $obj=Get-ADObject -Filter "objectClass -eq 'nTDSService'" -Properties dsHeuristics -SearchBase "CN=Services,$((Get-ADRootDSE).configurationNamingContext)" -ErrorAction Stop; if ($null -eq $obj) { throw } $h=$obj.dsHeuristics; if ($null -eq $h) { [PSCustomObject]@{ Status='PASS'; Detail='dsHeuristics attribute is not set (Defaults secure)' } } else { $isAnon=($h.Length -ge 7) -and ($h[6] -eq '2'); $stat=if($isAnon){'FAIL'}else{'PASS'}; $msg=if($isAnon){'Allows Anonymous Access'}else{'Secure'}; $c=if($h.Length -ge 7){$h[6]}else{'N/A'}; [PSCustomObject]@{ Status=$stat; Detail=("dsHeuristics value is [{0}]. Seventh char is '{1}' ({2})." -f $h,$c,$msg) } } } catch { [PSCustomObject]@{ Status='ERROR'; Detail="Directory Service object could not be located or read." } } ) | Out-String -Width 4096'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'Status Detail '
- stdout_line equals '------ ------ '
- stdout_line equals 'PASS dsHeuristics attribute is not set (Defaults secure)'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'if (([adsi]"LDAP://$((Get-ADDomain).DistinguishedName)").PSBase.ObjectSecurity.GetAccessRules($true, $true, [System.Security.Principal.SecurityIdentifier]) | Where-Object { $_.IdentityReference -eq 'S-1-5-7' -and $_.AccessControlType -eq 'Allow' }) { Write-Host "FAIL: ANONYMOUS LOGON is configured with ALLOW permissions." } else { Write-Host "PASS: ANONYMOUS LOGON is missing or does not have ALLOW permissions." }'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern 'FAIL'
- shell equals 'powershell'
- command equals 'if (([adsi]"LDAP://$((Get-ADDomain).DistinguishedName)").PSBase.ObjectSecurity.GetAccessRules($true, $true, [System.Security.Principal.SecurityIdentifier]) | Where-Object { $_.IdentityReference -eq 'S-1-5-7' -and $_.AccessControlType -eq 'Allow' }) { Write-Host "FAIL: ANONYMOUS LOGON is configured with ALLOW permissions." } else { Write-Host "PASS: ANONYMOUS LOGON is missing or does not have ALLOW permissions." }'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'PASS: ANONYMOUS LOGON is missing or does not have ALLOW permissions.'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal to 'LimitBlankPasswordUse'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa'
- name equals 'LimitBlankPasswordUse'
- last_write_time equals '134342241690000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'anonymous_name_lookup' must be equal to '0'
- max_passwd_age equals '3628800'
- min_passwd_age equals '86400'
- min_passwd_len equals '7'
- password_hist_len equals '24'
- password_complexity equals '1'
- reversible_encryption equals '0'
- anonymous_name_lookup equals '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'System\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal (case insensitive) to 'RestrictAnonymousSAM'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'System\CurrentControlSet\Control\Lsa'
- name equals 'RestrictAnonymousSAM'
- last_write_time equals '134342241690000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal to 'restrictanonymous'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa'
- name equals 'restrictanonymous'
- last_write_time equals '134342241690000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters'
- check = 'name' must be equal to 'restrictnullsessaccess'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters'
- name equals 'restrictnullsessaccess'
- last_write_time equals '134342234770000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal to 'LmCompatibilityLevel'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '5'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_TCB_NAME'
- userright equals 'SE_TCB_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_CREATE_TOKEN_NAME'
- userright equals 'SE_CREATE_TOKEN_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_DEBUG_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_DEBUG_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'filepath' must be equal to 'C:\ProgramData\ssh\sshd_config'
- check = 'pattern' must match the pattern '^\s*(?i)PermitEmptyPasswords(?-i)[ \t]+([\w\"]+)[\s]*(?:|(?:#.*))?$'
- check = 'instance' must be greater than or equal to '1'
- check_existence = 'at_least_one_exists', check = all 'subexpression' must match the pattern '^(no|"no")$'
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
V-277997 - Windows Server 2025 local volumes must use a format that supports New Technology File System (NTFS) attributes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277997r1182022_rule | ||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||
| Version: | WN25-00-000130 | ||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||
| Description: | The ability to set access permissions and auditing is critical to maintaining the security and proper access controls of a system. To support this, volumes must be formatted using a file system that supports NTFS attributes. | ||||||||||||||||||
| Check Text: | Open "Computer Management". Select "Disk Management" under "Storage". For each local volume, if the file system does not indicate "NTFS", this is a finding. "ReFS" (Resilient File System) is also acceptable and would not be a finding. "CSVFS" (Cluster Shared Volumes File Systems) is also acceptable and would not be a finding. This does not apply to system partitions such the Recovery and EFI System Partition. | ||||||||||||||||||
| Fix Text: | Format volumes to use NTFS, ReFS, or CSVFS. | ||||||||||||||||||
| Severity: | high | ||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||
| Reference: |
| ||||||||||||||||||
| Definitions: |
| ||||||||||||||||||
| Tests: |
|
V-278040 - Windows Server 2025 reversible password encryption must be disabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278040r1180826_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-AC-000090 | ||||||||||||||||||||||||
| Identities: | CCI-004062 (NIST SP 800-53 Rev 5: IA-5 (1) (d)) | ||||||||||||||||||||||||
| Description: | Storing passwords using reversible encryption is essentially the same as storing clear-text versions of the passwords, which are easily compromised. For this reason, this policy must never be enabled. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for "Store passwords using reversible encryption" is not set to "Disabled", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "ClearTextPassword" equals "1" in the file, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. Set "Store passwords using reversible encryption" to "Disabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278099 - Windows Server 2025 AutoPlay must be turned off for nonvolume devices.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278099r1181003_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000210 | ||||||||||||||||||||||||
| Identities: | CCI-001764 (NIST SP 800-53 Rev 4: CM-7 (2); NIST SP 800-53 Rev 5: CM-7 (2)) | ||||||||||||||||||||||||
| Description: | Allowing AutoPlay to execute may introduce malicious code to a system. AutoPlay begins reading from a drive as soon as media is inserted into the drive. As a result, the setup file of programs or music on audio media may start. This setting will disable AutoPlay for nonvolume devices, such as Media Transfer Protocol (MTP) devices. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Explorer\ Value Name: NoAutoplayfornonVolume Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> Disallow Autoplay for nonvolume devices to "Enabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278100 - Windows Server 2025 default AutoRun behavior must be configured to prevent AutoRun commands.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278100r1181006_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000220 | ||||||||||||||||||||||||
| Identities: | CCI-001764 (NIST SP 800-53 Rev 4: CM-7 (2); NIST SP 800-53 Rev 5: CM-7 (2)) | ||||||||||||||||||||||||
| Description: | Allowing AutoRun commands to execute may introduce malicious code to a system. Configuring this setting prevents AutoRun commands from executing. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: NoAutorun Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> Set the default behavior for AutoRun to "Enabled" with "Do not execute any autorun commands" selected. | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278101 - Windows Server 2025 AutoPlay must be disabled for all drives.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278101r1181009_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000230 | ||||||||||||||||||||||||
| Identities: | CCI-001764 (NIST SP 800-53 Rev 4: CM-7 (2); NIST SP 800-53 Rev 5: CM-7 (2)) | ||||||||||||||||||||||||
| Description: | Allowing AutoPlay to execute may introduce malicious code to a system. AutoPlay begins reading from a drive as soon media is inserted into the drive. As a result, the setup file of programs or music on audio media may start. By default, AutoPlay is disabled on removable drives, such as the floppy disk drive (but not the CD-ROM drive) and on network drives. Enabling this policy disables AutoPlay on all drives. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer\ Value Name: NoDriveTypeAutoRun Type: REG_DWORD Value: 0x000000ff (255) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> AutoPlay Policies >> Turn off AutoPlay to "Enabled" with "All Drives" selected. | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278121 - Windows Server 2025 must disable the Windows Installer Always install with elevated privileges option.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278121r1181069_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000430 | ||||||||||||||||||||||||
| Identities: | CCI-003980 (NIST SP 800-53 Rev 5: CM-11 (2)) | ||||||||||||||||||||||||
| Description: | Standard user accounts must not be granted elevated privileges. Enabling Windows Installer to elevate privileges when installing applications can allow malicious persons and applications to gain full control of a system. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Installer\ Value Name: AlwaysInstallElevated Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> Always install with elevated privileges to "Disabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278125 - Windows Server 2025 Windows Remote Management (WinRM) client must not use Basic authentication.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278125r1181081_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000470 | ||||||||||||||||||||||||
| Identities: | CCI-000877 (NIST SP 800-53: MA-4 c; NIST SP 800-53A: MA-4.1 (iv); NIST SP 800-53 Rev 4: MA-4 c; NIST SP 800-53 Rev 5: MA-4 c) | ||||||||||||||||||||||||
| Description: | Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowBasic Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> Allow Basic authentication to "Disabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278128 - Windows Server 2025 Windows Remote Management (WinRM) service must not use Basic authentication.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278128r1181090_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000500 | ||||||||||||||||||||||||
| Identities: | CCI-000877 (NIST SP 800-53: MA-4 c; NIST SP 800-53A: MA-4.1 (iv); NIST SP 800-53 Rev 4: MA-4 c; NIST SP 800-53 Rev 5: MA-4 c) | ||||||||||||||||||||||||
| Description: | Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Service\ Value Name: AllowBasic Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> Allow Basic authentication to "Disabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278138 - Windows Server 2025 permissions on the Active Directory data files must only allow system administrators (SAs) access.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278138r1182081_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000070 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) CCI-001314 (NIST SP 800-53: SI-11 c; NIST SP 800-53A: SI-11.1 (iv); NIST SP 800-53 Rev 4: SI-11 b; NIST SP 800-53 Rev 5: SI-11 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Improper access permissions for directory data-related files could allow unauthorized users to read, modify, or delete directory data or audit trails. Satisfies: SRG-OS-000324-GPOS-00125, SRG-OS-000206-GPOS-00084 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Run "Regedit". Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters". Note the directory locations in the values for: Database log files path DSA Database file By default, they will be \Windows\NTDS. If the locations are different, run the following for each: Open "command prompt (Admin)". Navigate to the NTDS directory (\Windows\NTDS by default). Run "icacls *.*". If the permissions on each file are not as restrictive as the following, this is a finding: NT AUTHORITY\SYSTEM:(I)(F) BUILTIN\Administrators:(I)(F) (I) - permission inherited from parent container (F) - full access | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Maintain the permissions on NTDS database and log files as follows: NT AUTHORITY\SYSTEM:(I)(F) BUILTIN\Administrators:(I)(F) (I) - permission inherited from parent container (F) - full access | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278139 - Windows Server 2025 Active Directory SYSVOL directory must have the proper access control permissions.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278139r1182083_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-DC-000080 | ||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||
| Description: | Improper access permissions for directory data files could allow unauthorized users to read, modify, or delete directory data. The SYSVOL directory contains public files (to the domain) such as policies and logon scripts. Data in shared subdirectories are replicated to all domain controllers in a domain. | ||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Open a command prompt. Run "net share". Make note of the directory location of the SYSVOL share. By default, this will be \Windows\SYSVOL\sysvol. For this requirement, permissions will be verified at the first SYSVOL directory level. If any standard user accounts or groups have greater than "Read & execute" permissions, this is a finding. The default permissions noted below meet this requirement: Open command prompt. Run "icacls c:\Windows\SYSVOL". The following results must be displayed: NT AUTHORITY\Authenticated Users:(RX) NT AUTHORITY\Authenticated Users:(OI)(CI)(IO)(GR,GE) BUILTIN\Server Operators:(RX) BUILTIN\Server Operators:(OI)(CI)(IO)(GR,GE) BUILTIN\Administrators:(M,WDAC,WO) BUILTIN\Administrators:(OI)(CI)(IO)(F) NT AUTHORITY\SYSTEM:(F) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) CREATOR OWNER:(OI)(CI)(IO)(F) (RX) - Read & execute Run "icacls /help" to view definitions of other permission codes. | ||||||||||||||||||||||||
| Fix Text: | Maintain the permissions on the SYSVOL directory. Do not allow greater than "Read & execute" permissions for standard user accounts or groups. The defaults below meet this requirement: C:\Windows\SYSVOL Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Authenticated Users - Read & execute - This folder, subfolder, and files Server Operators - Read & execute- This folder, subfolder, and files Administrators - Special - This folder only (Special = Basic Permissions: all selected except Full control) CREATOR OWNER - Full control - Subfolders and files only Administrators - Full control - Subfolders and files only SYSTEM - Full control - This folder, subfolders, and files | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278140 - Windows Server 2025 Active Directory (AD) Group Policy Objects (GPOs) must have proper access control permissions.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278140r1182086_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-DC-000090 | ||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||
| Description: | When directory service database objects do not have appropriate access control permissions, it may be possible for malicious users to create, read, update, or delete the objects and degrade or destroy the integrity of the data. When the directory service is used for identification, authentication, or authorization functions, a compromise of the database objects could lead to a compromise of all systems relying on the directory service. For AD, the GPOs require special attention. In a distributed administration model (i.e., help desk), GPOs are more likely to have access permissions changed from the secure defaults. If inappropriate access permissions are defined for GPOs, this could allow an intruder to change the security policy applied to all domain client computers (workstations and servers). | ||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the permissions on GPOs. Open "Group Policy Management" (available from various menus or run "gpmc.msc"). Navigate to "Group Policy Objects" in the domain being reviewed (Forest >> Domains >> Domain). For each GPO: Select the GPO item in the left pane. Select the "Delegation" tab in the right pane. Select "Advanced". Select each Group or user name. View the permissions. If any standard user accounts or groups have "Allow" permissions greater than "Read" and "Apply group policy", this is a finding. Other access permissions that allow the objects to be updated are considered findings unless specifically documented by the information system security officer (ISSO). The default permissions noted below satisfy this requirement. The permissions shown are at the summary level. More detailed permissions can be viewed by selecting the next "Advanced" button, the desired Permission entry, and the "Edit" button. Authenticated Users - Read, Apply group policy, Special permissions The special permissions for Authenticated Users are for Read-type Properties. If detailed permissions include any Create, Delete, Modify, or Write Permissions, or Properties, this is a finding. The special permissions for the following default groups are not the focus of this requirement and may include a wide range of permissions and properties: CREATOR OWNER - Special permissions SYSTEM - Read, Write, Create all child objects, Delete all child objects, Special permissions Domain Admins - Read, Write, Create all child objects, Delete all child objects, Special permissions Enterprise Admins - Read, Write, Create all child objects, Delete all child objects, Special permissions ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions The Domain Admins and Enterprise Admins will not have the "Delete all child objects" permission on the two default Group Policy objects: Default Domain Policy and Default Domain Controllers Policy. They will have this permission on organization created Group Policy objects. | ||||||||||||||||||||||||
| Fix Text: | Maintain the permissions on GPOs to not allow greater than "Read" and "Apply group policy" for standard user accounts or groups. The default permissions below meet this requirement: Authenticated Users - Read, Apply group policy, Special permissions The special permissions for Authenticated Users are for Read-type Properties. CREATOR OWNER - Special permissions SYSTEM - Read, Write, Create all child objects, Delete all child objects, Special permissions Domain Admins - Read, Write, Create all child objects, Delete all child objects, Special permissions Enterprise Admins - Read, Write, Create all child objects, Delete all child objects, Special permissions ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions Document any other access permissions that allow the objects to be updated with the ISSO. The Domain Admins and Enterprise Admins will not have the "Delete all child objects" permission on the two default Group Policy objects: Default Domain Policy and Default Domain Controllers Policy. They will have this permission on created GPOs. | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278141 - Windows Server 2025 Active Directory Domain Controllers Organizational Unit (OU) object must have the proper access control permissions.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278141r1182088_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-DC-000100 | ||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||
| Description: | When Active Directory objects do not have appropriate access control permissions, it may be possible for malicious users to create, read, update, or delete the objects and degrade or destroy the integrity of the data. When the directory service is used for identification, authentication, or authorization functions, a compromise of the database objects could lead to a compromise of all systems that rely on the directory service. The Domain Controllers OU object requires special attention as the Domain Controllers are central to the configuration and management of the domain. Inappropriate access permissions defined for the Domain Controllers OU could allow an intruder or unauthorized personnel to make changes that could lead to the compromise of the domain. | ||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the permissions on the Domain Controllers OU. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu if not previously selected. Select the "Domain Controllers" OU (folder in folder icon). Right-click and select "Properties". Select the "Security" tab. If the permissions on the Domain Controllers OU do not restrict changes to System, Domain Admins, Enterprise Admins and Administrators, this is a finding. The default permissions listed below satisfy this requirement. Domains supporting Microsoft Exchange will have additional Exchange related permissions on the Domain Controllers OU. These may include some change-related permissions and is not a finding. The permissions shown are at the summary level. To view more detailed permissions, select "Advanced", then select the desired Permission entry, then click "View" or "Edit". Except where noted otherwise, the special permissions may include a wide range of permissions and properties and are acceptable for this requirement. CREATOR OWNER - Special permissions SELF - Special permissions Authenticated Users - Read, Special permissions The special permissions for Authenticated Users are Read types. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. SYSTEM - Full Control Domain Admins - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Enterprise Admins - Full Control Key Admins - Special permissions Enterprise Key Admins - Special permissions Administrators - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Pre-Windows 2000 Compatible Access - Special permissions The Special permissions for Pre-Windows 2000 Compatible Access are Read types. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions | ||||||||||||||||||||||||
| Fix Text: | Limit the permissions on the Domain Controllers OU to restrict changes to System, Domain Admins, Enterprise Admins, and Administrators. The default permissions listed below satisfy this requirement. Domains supporting Microsoft Exchange will have additional Exchange-related permissions on the Domain Controllers OU. These may include some change-related permissions. CREATOR OWNER - Special permissions SELF - Special permissions Authenticated Users - Read, Special permissions The special permissions for Authenticated Users are Read types. SYSTEM - Full Control Domain Admins - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Enterprise Admins - Full Control Key Admins - Special permissions Enterprise Key Admins - Special permissions Administrators - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Pre-Windows 2000 Compatible Access - Special permissions The special permissions for Pre-Windows 2000 Compatible Access are Read types. ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278142 - Windows Server 2025 organization created Active Directory Organizational Unit (OU) objects must have proper access control permissions.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278142r1182090_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000110 | ||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||
| Description: | When directory service database objects do not have appropriate access control permissions, it may be possible for malicious users to create, read, update, or delete the objects and degrade or destroy the integrity of the data. When the directory service is used for identification, authentication, or authorization functions, a compromise of the database objects could lead to a compromise of all systems that rely on the directory service. For Active Directory, the OU objects require special attention. In a distributed administration model (i.e., help desk), OU objects are more likely to have access permissions changed from the secure defaults. If inappropriate access permissions are defined for OU objects, it could allow an intruder to add or delete users in the OU. This could result in unauthorized access to data or a denial of service (DoS) to authorized users. | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the permissions on domain-defined OUs. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Ensure "Advanced Features" is selected in the "View" menu. For each OU that is defined (folder in folder icon) excluding the Domain Controllers OU: Right-click the OU and select "Properties". Select the "Security" tab. If the Allow type permissions on the OU are not at least as restrictive as those below, this is a finding. The permissions shown are at the summary level. To view more detailed permissions, select "Advanced", then select the desired Permission entry, then click "View" or "Edit". Except where noted otherwise, the special permissions may include a wide range of permissions and properties and are acceptable for this requirement. CREATOR OWNER - Special permissions Self - Special permissions Authenticated Users - Read, Special permissions The Special permissions for Authenticated Users are Read type. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. SYSTEM - Full Control Domain Admins - Full Control Enterprise Admins - Full Control Key Admins - Special permissions Enterprise Key Admins - Special permissions Administrators - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Pre-Windows 2000 Compatible Access - Special permissions The Special permissions for Pre-Windows 2000 Compatible Access are for Read types. If detailed permissions include any Create, Delete, Modify, or Write Permissions or Properties, this is a finding. ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions If an information system security officer (ISSO)-approved distributed administration model (help desk or other user support staff) is implemented, permissions above Read may be allowed for groups documented by the ISSO. If any OU with improper permissions includes identification or authentication data (e.g., accounts, passwords, or password hash data) used by systems to determine access control, the severity is CAT I (e.g., OUs that include user accounts, including service/application accounts). If an OU with improper permissions does not include identification and authentication data used by systems to determine access control, the severity is CAT II (e.g., Workstation, Printer OUs). | ||||||||||||||||||||||||||
| Fix Text: | Maintain the Allow type permissions on domain-defined OUs to be at least as restrictive as the defaults below. Document any additional permissions above Read with the ISSO if an approved distributed administration model (help desk or other user support staff) is implemented. CREATOR OWNER - Special permissions Self - Special permissions Authenticated Users - Read, Special permissions The special permissions for Authenticated Users are Read type. SYSTEM - Full Control Domain Admins - Full Control Enterprise Admins - Full Control Key Admins - Special permissions Enterprise Key Admins - Special permissions Administrators - Read, Write, Create all child objects, Generate resultant set of policy (logging), Generate resultant set of policy (planning), Special permissions Pre-Windows 2000 Compatible Access - Special permissions The special permissions for Pre-Windows 2000 Compatible Access are for Read types. ENTERPRISE DOMAIN CONTROLLERS - Read, Special permissions | ||||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278146 - Windows Server 2025 directory data (outside the root DSE) of a nonpublic directory must be configured to prevent anonymous access.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278146r1182098_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000150 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | To the extent that anonymous access to directory data (outside the root DSE) is permitted, read access control of the data is effectively disabled. If other means of controlling access (such as network restrictions) are compromised, there may be nothing else to protect the confidentiality of sensitive directory data. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Open command prompt (not elevated). Run "ldp.exe". From the "Connection menu", select "Bind". Clear the User, Password, and Domain fields. Select "Simple bind" for the Bind type, and then click "OK". Confirmation of anonymous access will be displayed at the end: res = ldap_simple_bind_s Authenticated as: 'NT AUTHORITY\ANONYMOUS LOGON' From the "Browse" menu, select "Search". In the Search dialog, enter the DN of the domain naming context (e.g., "dc=disaost,dc=mil") in the Base DN field. Clear the Attributes field and select "Run". Error messages must display related to Bind and user not authenticated. If attribute data is displayed, anonymous access is enabled to the domain naming context and this is a finding. The following network controls allow the finding severity to be downgraded to a CAT II since these measures lower the risk associated with anonymous access. Network hardware ports at the site are subject to 802.1x authentication or MAC address restrictions. Premise firewall or host restrictions prevent access to ports 389, 636, 3268, and 3269 from client hosts not explicitly identified by domain (.mil) or IP address. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure directory data (outside the root DSE) of a nonpublic directory to prevent anonymous access. For AD, there are multiple configuration items that could enable anonymous access. Changing the access permissions on the domain naming context object (from the secure defaults) could enable anonymous access. If the check procedures indicate this is the cause, the process that was used to change the permissions must be reversed. This could have been through the Windows Support Tools ADSI Edit console (adsiedit.msc). The dsHeuristics option is used. This is addressed in the check for AD.0230 in the AD Forest STIG. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278190 - Windows Server 2025 must be running Credential Guard on domain-joined member servers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278190r1182307_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000140 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | Credential Guard uses virtualization-based security to protect data that could be used in credential theft attacks if compromised. This authentication information, which was stored in the Local Security Authority (LSA) in previous versions of Windows, is isolated from the rest of operating system and can only be accessed by privileged system software. | ||||||||||
| Check Text: | For domain controllers and stand-alone or nondomain-joined systems, this is not applicable. Open PowerShell with elevated privileges (run as administrator). Enter the following: "Get-CimInstance -ClassName Win32_DeviceGuard -Namespace root\Microsoft\Windows\DeviceGuard" If "SecurityServicesRunning" does not include a value of "1" (e.g., "{1, 2}"), this is a finding. Alternately: Run "System Information". Under "System Summary", verify the following: If "Device Guard Security Services Running" does not list "Credential Guard", this is a finding. The policy settings referenced in the Fix section will configure the following registry value. However, due to hardware requirements, the registry value alone does not ensure proper function. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\DeviceGuard\ Value Name: LsaCfgFlags Value Type: REG_DWORD Value: 0x00000001 (1) (Enabled with UEFI lock) A Microsoft article on Credential Guard system requirements can be found at the following link: https://docs.microsoft.com/en-us/windows/security/identity-protection/credential-guard/credential-guard-requirements | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Device Guard >> Turn On Virtualization Based Security to "Enabled" with "Enabled with UEFI lock" selected for "Credential Guard Configuration". A Microsoft article on Credential Guard system requirements can be found at the following link: https://docs.microsoft.com/en-us/windows/security/identity-protection/credential-guard/credential-guard-requirements Severity Override Guidance: The AO can allow the severity override if they have reviewed the overall protection provided to the affected servers that are not capable of complying with the Credential Guard requirement. Items that must be reviewed/considered for compliance or mitigation for non-Credential Guard compliance are: - The use of Microsoft Local Administrator Password Solution (LAPS) or similar products to control different local administrative passwords for all affected servers. This is to include a strict password change requirement (60 days or less). - Strict separation of roles and duties. Server administrator credentials cannot be used on Windows desktop to administer it. Documentation of all exceptions must be supplied. - Use of a Privileged Access Workstation (PAW) and adherence to the Clean Source principle for administering affected servers. - Boundary Protection that is currently in place to protect from vulnerabilities in the network/servers. - Windows Defender rule block credential stealing from LSASS.exe is applied. This rule can only be applied if Windows Defender is in use. - The overall number of vulnerabilities that are unmitigated on the network/servers. | ||||||||||
| Severity: | high | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278196 - Windows Server 2025 must prevent local accounts with blank passwords from being used from the network.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278196r1181294_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000020 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | An account without a password can allow unauthorized access to a system as only the username would be required. Password policies must prevent accounts with blank passwords from existing on a system. However, if a local account with a blank password does exist, enabling this setting will prevent network access, limiting the account to local console logon only. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: LimitBlankPasswordUse Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Accounts: Limit local account use of blank passwords to console logon only to "Enabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278215 - Windows Server 2025 must not allow anonymous SID/Name translation.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278215r1181351_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000210 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Allowing anonymous SID/Name translation can provide sensitive information for accessing a system. Only authorized users must be able to perform such translations. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Network access: Allow anonymous SID/Name translation" is not set to "Disabled", this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Allow anonymous SID/Name translation to "Disabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278216 - Windows Server 2025 must not allow anonymous enumeration of Security Account Manager (SAM) accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278216r1181354_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000220 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Anonymous enumeration of SAM accounts allows anonymous logon users (null session connections) to list all accounts names, thus providing a list of potential points to attack the system. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: RestrictAnonymousSAM Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Do not allow anonymous enumeration of SAM accounts to "Enabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278217 - Windows Server 2025 must not allow anonymous enumeration of shares.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278217r1181357_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-SO-000230 | ||||||||||||||||||||||||||
| Identities: | CCI-001090 (NIST SP 800-53: SC-4; NIST SP 800-53A: SC-4.1; NIST SP 800-53 Rev 4: SC-4; NIST SP 800-53 Rev 5: SC-4) | ||||||||||||||||||||||||||
| Description: | Allowing anonymous logon users (null session connections) to list all account names and enumerate all shared resources can provide a map of potential points to attack the system. | ||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: RestrictAnonymous Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Do not allow anonymous enumeration of SAM accounts and shares to "Enabled". | ||||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278219 - Windows Server 2025 must restrict anonymous access to Named Pipes and Shares.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278219r1181363_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000250 | ||||||||||||||||||||||||
| Identities: | CCI-001090 (NIST SP 800-53: SC-4; NIST SP 800-53A: SC-4.1; NIST SP 800-53 Rev 4: SC-4; NIST SP 800-53 Rev 5: SC-4) | ||||||||||||||||||||||||
| Description: | Allowing anonymous access to named pipes or shares provides the potential for unauthorized system access. This setting restricts access to those defined in "Network access: Named Pipes that can be accessed anonymously" and "Network access: Shares that can be accessed anonymously", both of which must be blank under other requirements. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: RestrictNullSessAccess Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Restrict anonymous access to Named Pipes and Shares to "Enabled". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278225 - Windows Server 2025 LAN Manager authentication level must be configured to send NTLMv2 response only and to refuse LM and NTLM.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278225r1182320_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000310 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | The Kerberos v5 authentication protocol is the default for authentication of users who are logging on to domain accounts. NTLM, which is less secure, is retained in later Windows versions for compatibility with clients and servers that are running earlier versions of Windows or applications that still use it. It is also used to authenticate logons to stand-alone or nondomain-joined computers that are running later versions. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: LmCompatibilityLevel Value Type: REG_DWORD Value: 0x00000005 (5) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: LAN Manager authentication level to "Send NTLMv2 response only. Refuse LM & NTLM". | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278242 - The Windows Server 2025 "Act as part of the operating system" user right must not be assigned to any groups or accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278242r1182209_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-UR-000020 | ||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Act as part of the operating system" user right can assume the identity of any user and gain access to resources that the user is authorized to access. Any accounts with this right can take complete control of a system. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups (to include administrators), are granted the "Act as part of the operating system" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeTcbPrivilege" user right, this is a finding. If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). Passwords for accounts with this user right must be protected as highly privileged accounts. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Act as part of the operating system to be defined but containing no entries (blank). | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278246 - The Windows Server 2025 "Create a token object" user right must not be assigned to any groups or accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278246r1182213_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-UR-000060 | ||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Create a token object" user right allows a process to create an access token. This could be used to provide elevated rights and compromise a system. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Create a token object" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeCreateTokenPrivilege" user right, this is a finding. If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). Passwords for application accounts with this user right must be protected as highly privileged accounts. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create a token object to be defined but containing no entries (blank). | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278250 - The Windows Server 2025 "Debug programs" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278250r1182218_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000100 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Debug programs" user right can attach a debugger to any process or to the kernel, providing complete access to sensitive and critical operating system components. This right is given to Administrators in the default configuration. | ||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Debug programs" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeDebugPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). Passwords for application accounts with this user right must be protected as highly privileged accounts. | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Debug programs to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-285316 - Windows Server 2025 OpenSSH must not allow blank passwords.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285316r1211176_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SH-000040 | ||||||||||||||||||||||||
| Identities: | CCI-000766 (NIST SP 800-53: IA-2 (2); NIST SP 800-53A: IA-2 (2).1; NIST SP 800-53 Rev 4: IA-2 (2); NIST SP 800-53 Rev 5: IA-2 (2)) | ||||||||||||||||||||||||
| Description: | If an account has an empty password, anyone could log on and run commands with the privileges of that account. Accounts with empty passwords must never be used in operational environments. Satisfies: SRG-OS-000106-GPOS-00053, SRG-OS-000480-GPOS-00229, SRG-OS-000480-GPOS-00228 | ||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify system remote access using OpenSSH prevents logging on with a blank password with the following command: C:\ > Get-Content "$env:ProgramData\ssh\sshd_config" | Select-String -Pattern '^\s*PermitEmptyPasswords' PermitEmptyPasswords no If the "PermitEmptyPasswords" keyword is set to "yes", is missing, or is commented out, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | To configure the system, add or modify the following line in the "$env:ProgramData/ssh/sshd_config" file: PermitEmptyPasswords no Restart the OpenSSH service for the settings to take effect. | ||||||||||||||||||||||||
| Severity: | high | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-277987 - Windows Server 2025 administrative accounts must not be used with applications that access the internet, such as web browsers, or with potential internet sources, such as email.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277987r1212169_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000030 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) CCI-001312 (NIST SP 800-53: SI-11 b; NIST SP 800-53A: SI-11.1 (iii); NIST SP 800-53 Rev 4: SI-11 a; NIST SP 800-53 Rev 5: SI-11 a) | ||||||||||
| Description: | Accounts with administrative privileges using applications that access the internet, or have potential internet sources, expose a system to compromise. If a flaw in an application is exploited while running as a privileged user, the entire system could be compromised. Web browsers and email are common attack vectors for introducing malicious code and must not be run with an administrative account. Since administrative accounts could change or work around technical restrictions for running a web browser or other applications, it is essential that a policy prohibits administrative accounts accessing the internet or use public-facing applications such as email. The policy must define specific exceptions for local service administration. These exceptions may include HTTP(S)-based tools that are used for the administration of the local system, services, or attached devices. Technical methods (such as allow listing) must be used to enforce the policy, except as approved by the AO. Satisfies: SRG-OS-000480-GPOS-00227, SRG-OS-000205-GPOS-00083 | ||||||||||
| Check Text: | Determine whether organization policy, at a minimum, prohibits administrative accounts from using applications that access the internet or other public-facing networks. These applications include web browsers or applications with potential internet sources, such as email, except as necessary for local service administration. The policy must define specific exceptions for local service administration. These exceptions may include HTTP(S)-based tools that are used for the administration of the local system, services, or attached devices. Determine whether the organization uses technical means, such as allow listing via AppLocker or Software Restriction Policies (SRPs), to prevent administrative accounts' use of browsers and email applications. Note: Allow list tools facilitate defining rules that explicitly permit approved applications to run while blocking all others by default. Administrative accounts that do not have technical restrictions to applications that access public-facing networks must be documented and approved by the information system security officer (ISSO) or authorizing official (AO). If administrative access to applications that access public-facing networks is not blocked by technical means (except as approved by the AO), this is a finding. | ||||||||||
| Fix Text: | Establish a policy, at minimum, to prohibit administrative accounts from using applications that access public-facing networks or the internet, such as web browsers, or applications with potential internet sources, such as email. Ensure the policy is enforced by technical means, such as allow listing via AppLocker or Software Restriction Policies (SRPs). Document any exceptions to technical enforcement with the information system security officer (ISSO). | ||||||||||
| Severity: | high | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278009 - Windows Server 2025 systems requiring data-at-rest protections must employ cryptographic mechanisms to prevent unauthorized disclosure and modification of the information at rest.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278009r1211149_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000250 | ||||||||||
| Identities: | CCI-001199 (NIST SP 800-53: SC-28; NIST SP 800-53A: SC-28.1; NIST SP 800-53 Rev 4: SC-28; NIST SP 800-53 Rev 5: SC-28) CCI-002475 (NIST SP 800-53 Rev 4: SC-28 (1); NIST SP 800-53 Rev 5: SC-28 (1)) CCI-002476 (NIST SP 800-53 Rev 4: SC-28 (1); NIST SP 800-53 Rev 5: SC-28 (1)) | ||||||||||
| Description: | This requirement addresses protection of user-generated data as well as operating system-specific configuration data. Organizations may choose to employ different mechanisms to achieve confidentiality and integrity protections, as appropriate, in accordance with the security category and/or classification of the information. Selection of a cryptographic mechanism is based on the need to protect the integrity of organizational information. The strength of the mechanism is commensurate with the security category and/or classification of the information. Organizations have the flexibility to either encrypt all information on storage devices (i.e., full disk encryption) or encrypt specific data structures (e.g., files, records, or fields). Satisfies: SRG-OS-000185-GPOS-00079, SRG-OS-000404-GPOS-00183, SRG-OS-000405-GPOS-00184 | ||||||||||
| Check Text: | Note: If there is a documented and approved reason to omit data-at-rest encryption at the operating system level, such as encryption provided by a hypervisor or a disk storage array in a virtualized environment, this requirement is not applicable. Verify systems that require additional protections due to factors such as inadequate physical protection or sensitivity of the data employ encryption to protect the confidentiality and integrity of all information at rest. If there is no evidence that persistent user-generated data and operating system-specific configuration data are encrypted, this is a finding. | ||||||||||
| Fix Text: | Configure systems that require data-at-rest protections to employ encryption to protect the confidentiality and integrity of all persistent user-generated data and operating system-specific configuration data. The encryption method implemented must use FIPS-compliant algorithms. | ||||||||||
| Severity: | high | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278132 - Windows Server 2025 must only allow administrators responsible for the domain controller to have Administrator rights on the system.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278132r1181102_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-DC-000010 | ||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||
| Description: | An account that does not have Administrator duties must not have Administrator rights. Such rights would allow the account to bypass or modify required security restrictions on that machine and make it vulnerable to attack. System administrators must log on to systems using only accounts with the minimum level of authority necessary. Standard user accounts must not be members of the built-in Administrators group. | ||||||||||
| Check Text: | This applies to domain controllers. A separate version applies to other systems. Review the Administrators group. Only the appropriate administrator groups or accounts responsible for administration of the system may be members of the group. Standard user accounts must not be members of the local administrator group. If prohibited accounts are members of the local administrators group, this is a finding. If the built-in Administrator account or other required administrative accounts are found on the system, this is not a finding. | ||||||||||
| Fix Text: | Configure the Administrators group to include only administrator groups or accounts that are responsible for the system. Remove any standard user accounts. | ||||||||||
| Severity: | high | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278160 - Windows Server 2025 domain Controller PKI certificates must be issued by the DoW PKI or an approved External Certificate Authority (ECA).
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278160r1256718_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-DC-000290 | ||||||||||
| Identities: | CCI-000185 (NIST SP 800-53: IA-5 (2); NIST SP 800-53A: IA-5 (2).1; NIST SP 800-53 Rev 4: IA-5 (2) (a); NIST SP 800-53 Rev 5: IA-5 (2) (b) (1)) | ||||||||||
| Description: | A PKI implementation depends on the practices established by the Certificate Authority (CA) to ensure the implementation is secure. Without proper practices, the certificates issued by a CA have limited value in authentication functions. The use of multiple CAs from separate PKI implementations results in interoperability issues. If servers and clients do not have a common set of root CA certificates, they are not able to authenticate each other. | ||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Run "MMC". Select "Add/Remove Snap-in" from the "File" menu. Select "Certificates" in the left pane, and then click "Add >". Select "Computer Account", and then click "Next". Select the appropriate option for "Select the computer you want this snap-in to manage", and then click "Finish". Click "OK". Select and expand the "Certificates (Local Computer)" entry in the left pane. Select and expand the "Personal" entry in the left pane. Select the "Certificates" entry in the left pane. In the right pane, examine the "Issued By" field for the certificate to determine the issuing CA. If the "Issued By" field of the PKI certificate being used by the domain controller does not indicate the issuing CA is part of the DoW PKI or an approved ECA, this is a finding. If the certificates in use are issued by a CA authorized by the Component's CIO, this is a CAT II finding. There are multiple sources from which lists of valid DoW CAs and approved ECAs can be obtained: The Global Directory Service (GDS) website provides an online source. The address for this site is https://crl.gds.disa.mil. DoW Public Key Enablement (PKE) Engineering Support maintains the InstallRoot utility to manage DoW supported root certificates on Windows computers, which includes a list of authorized CAs. The utility package can be downloaded from the PKI and PKE Tools page on Cyber Exchange: https://www.cyber.mil/pki-pke/tools-configuration-files | ||||||||||
| Fix Text: | Obtain a server certificate for the domain controller issued by the DoW PKI or an approved ECA. | ||||||||||
| Severity: | high | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278161 - Windows Server 2025 PKI certificates associated with user accounts must be issued by a DoW PKI or an approved External Certificate Authority (ECA).
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278161r1256719_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-DC-000300 | ||||||||||
| Identities: | CCI-000185 (NIST SP 800-53: IA-5 (2); NIST SP 800-53A: IA-5 (2).1; NIST SP 800-53 Rev 4: IA-5 (2) (a); NIST SP 800-53 Rev 5: IA-5 (2) (b) (1)) | ||||||||||
| Description: | A PKI implementation depends on the practices established by the Certificate Authority (CA) to ensure the implementation is secure. Without proper practices, the certificates issued by a CA have limited value in authentication functions. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182 | ||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review user account mappings to PKI certificates. Open PowerShell. Enter "Get-ADUser -Filter * | FT Name, UserPrincipalName, Enabled". Exclude disabled accounts (e.g., DefaultAccount, Guest) and the krbtgt account. If the User Principal Name (UPN) is not in the format of an individual's identifier for the certificate type and for the appropriate domain suffix, this is a finding. For standard NIPRNet certificates, the individual's identifier is in the format of an Electronic Data Interchange - Personnel Identifier (EDI-PI). Alt Tokens and other certificates may use a different UPN format than the EDI-PI, which vary by organization. Verified these with the organization. NIPRNet example: Name - User Principal Name User1 - 1234567890@mil Refer to the PKE documentation for other network domain suffixes. If the mappings are to certificates issued by a CA authorized by the Component's CIO, this is a CAT II finding. | ||||||||||
| Fix Text: | Map user accounts to PKI certificates using the appropriate UPN for the network. Refer to the PKE documentation for details. | ||||||||||
| Severity: | high | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278177 - Windows Server 2025 must only allow administrators responsible for the member server or stand-alone or nondomain-joined system to have Administrator rights on the system.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278177r1182280_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Applicability: | StandaloneServer_or_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000010 | ||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||
| Description: | An account that does not have Administrator duties must not have Administrator rights. Such rights would allow the account to bypass or modify required security restrictions on that machine and make it vulnerable to attack. System administrators must log on to systems using only accounts with the minimum level of authority necessary. For domain-joined member servers, the Domain Admins group must be replaced by a domain member server administrator group (Refer to AD.0003 in the Active Directory Domain STIG). Restricting highly privileged accounts from the local Administrators group helps mitigate the risk of privilege escalation resulting from credential theft attacks. Standard user accounts must not be members of the built-in Administrators group. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems. A separate version applies to domain controllers. Open "Computer Management". Navigate to "Groups" under "Local Users and Groups". Review the local "Administrators" group. Only administrator groups or accounts responsible for administration of the system may be members of the group. For domain-joined member servers, the Domain Admins group must be replaced by a domain member server administrator group. Standard user accounts must not be members of the local Administrator group. If accounts that do not have responsibility for administration of the system are members of the local Administrators group, this is a finding. If the built-in Administrator account or other required administrative accounts are found on the system, this is not a finding. | ||||||||||
| Fix Text: | Configure the local "Administrators" group to include only administrator groups or accounts responsible for administration of the system. For domain-joined member servers, replace the Domain Admins group with a domain member server administrator group. Remove any standard user accounts. | ||||||||||
| Severity: | high | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
Detailed Results: Medium Severity (CAT II)
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'min_passwd_len' must be greater than or equal to '14'
- max_passwd_age equals '3628800'
- min_passwd_age equals '86400'
- min_passwd_len equals '7'
- password_hist_len equals '24'
- password_complexity equals '1'
- reversible_encryption equals '0'
- anonymous_name_lookup equals '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2\security\microsofttpm'
- check = 'wql' must be equal to 'SELECT IsEnabled_InitialValue FROM Win32_Tpm'
- for all 'result' the following must be true:
- all isenabled_initialvalue must be equal to '1'
- for all 'result' the following must be true:
- all isenabled_initialvalue must be equal to '-1'
- namespace equals 'root\cimv2\security\microsofttpm'
- wql equals 'SELECT IsEnabled_InitialValue FROM Win32_Tpm'
- check = 'namespace' must be equal to 'root\cimv2\security\microsofttpm'
- check = 'wql' must be equal to 'SELECT IsActivated_InitialValue FROM Win32_Tpm'
- for all 'result' the following must be true:
- all isactivated_initialvalue must be equal to '1'
- for all 'result' the following must be true:
- all isactivated_initialvalue must be equal to '-1'
- namespace equals 'root\cimv2\security\microsofttpm'
- wql equals 'SELECT IsActivated_InitialValue FROM Win32_Tpm'
- check = 'namespace' must be equal to 'root\cimv2\security\microsofttpm'
- check = 'wql' must be equal to 'SELECT IsOwned_InitialValue FROM Win32_Tpm'
- for all 'result' the following must be true:
- all isowned_initialvalue must be equal to '1'
- for all 'result' the following must be true:
- all isowned_initialvalue must be equal to '-1'
- namespace equals 'root\cimv2\security\microsofttpm'
- wql equals 'SELECT IsOwned_InitialValue FROM Win32_Tpm'
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal to 'everyoneincludesanonymous'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa'
- name equals 'everyoneincludesanonymous'
- last_write_time equals '134342241690000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'icacls($env:SystemDrive + '\')'
- check = 'pattern' must be equal to ':'
- check_existence = 'at_least_one_exists', check = all 'exit_status' must be equal to '0'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(OI\)\(CI\)\(F\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(OI\)\(CI\)\(F\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(OI\)\(CI\)\(RX\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(CI\)\(AD\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(CI\)\(IO\)\(WD\)'
- stdout_line must match the pattern '(?i)CREATOR OWNER:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)S-1-15-3-65536-1888954469-739942743-1668119174-2468466756-4239452838-1296943325-355587736-700089176:\(S,RD,X,RA\)'
State Requirement : stderr_line must not exist - shell equals 'powershell'
- command equals 'icacls($env:SystemDrive + '\')'
- pattern equals ':'
- exit_status equals '0'
- stdout_line equals 'C:\ S-1-15-3-65536-1888954469-739942743-1668119174-2468466756-4239452838-1296943325-355587736-700089176:(S,RD,X,RA)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(OI)(CI)(F)'
- stdout_line equals ' BUILTIN\Administrators:(OI)(CI)(F)'
- stdout_line equals ' BUILTIN\Users:(OI)(CI)(RX)'
- stdout_line equals ' BUILTIN\Users:(CI)(AD)'
- stdout_line equals ' BUILTIN\Users:(CI)(IO)(WD)'
- stdout_line equals ' CREATOR OWNER:(OI)(CI)(IO)(F)'
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal to 'everyoneincludesanonymous'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa'
- name equals 'everyoneincludesanonymous'
- last_write_time equals '134342241690000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'icacls (Get-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion" -Name ProgramFilesDir).ProgramFilesDir'
- check = 'pattern' must be equal to ':'
- check_existence = 'at_least_one_exists', check = all 'exit_status' must be equal to '0'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '(?i)NT SERVICE\\TrustedInstaller:\(F\)'
- stdout_line must match the pattern '(?i)NT SERVICE\\TrustedInstaller:\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(M\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(M\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(RX\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
- stdout_line must match the pattern '(?i)CREATOR OWNER:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES:\(RX\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL RESTRICTED APPLICATION PACKAGES:\(RX\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL RESTRICTED APPLICATION PACKAGES:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
State Requirement : stderr_line must not exist - shell equals 'powershell'
- command equals 'icacls (Get-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion" -Name ProgramFilesDir).ProgramFilesDir'
- pattern equals ':'
- exit_status equals '0'
- stdout_line equals 'C:\Program Files NT SERVICE\TrustedInstaller:(F)'
- stdout_line equals ' NT SERVICE\TrustedInstaller:(CI)(IO)(F)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(M)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F)'
- stdout_line equals ' BUILTIN\Administrators:(M)'
- stdout_line equals ' BUILTIN\Administrators:(OI)(CI)(IO)(F)'
- stdout_line equals ' BUILTIN\Users:(RX)'
- stdout_line equals ' BUILTIN\Users:(OI)(CI)(IO)(GR,GE)'
- stdout_line equals ' CREATOR OWNER:(OI)(CI)(IO)(F)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE)'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'icacls (Get-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion" -Name 'ProgramFilesDir (x86)').'ProgramFilesDir (x86)''
- check = 'pattern' must be equal to ':'
- check_existence = 'at_least_one_exists', check = all 'exit_status' must be equal to '0'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '(?i)NT SERVICE\\TrustedInstaller:\(F\)'
- stdout_line must match the pattern '(?i)NT SERVICE\\TrustedInstaller:\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(M\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(M\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(RX\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
- stdout_line must match the pattern '(?i)CREATOR OWNER:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES:\(RX\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL RESTRICTED APPLICATION PACKAGES:\(RX\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL RESTRICTED APPLICATION PACKAGES:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
State Requirement : stderr_line must not exist - shell equals 'powershell'
- command equals 'icacls (Get-ItemProperty -Path "HKLM:\SOFTWARE\Microsoft\Windows\CurrentVersion" -Name 'ProgramFilesDir (x86)').'ProgramFilesDir (x86)''
- pattern equals ':'
- exit_status equals '0'
- stdout_line equals 'C:\Program Files (x86) NT SERVICE\TrustedInstaller:(F)'
- stdout_line equals ' NT SERVICE\TrustedInstaller:(CI)(IO)(F)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(M)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F)'
- stdout_line equals ' BUILTIN\Administrators:(M)'
- stdout_line equals ' BUILTIN\Administrators:(OI)(CI)(IO)(F)'
- stdout_line equals ' BUILTIN\Users:(RX)'
- stdout_line equals ' BUILTIN\Users:(OI)(CI)(IO)(GR,GE)'
- stdout_line equals ' CREATOR OWNER:(OI)(CI)(IO)(F)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE)'
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal to 'everyoneincludesanonymous'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa'
- name equals 'everyoneincludesanonymous'
- last_write_time equals '134342241690000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'icacls($env:windir)'
- check = 'pattern' must be equal to ':'
- check_existence = 'at_least_one_exists', check = all 'exit_status' must be equal to '0'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '(?i)NT SERVICE\\TrustedInstaller:\(F\)'
- stdout_line must match the pattern '(?i)NT SERVICE\\TrustedInstaller:\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(M\)'
- stdout_line must match the pattern '(?i)NT AUTHORITY\\SYSTEM:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(M\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Administrators:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(RX\)'
- stdout_line must match the pattern '(?i)BUILTIN\\Users:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
- stdout_line must match the pattern '(?i)CREATOR OWNER:\(OI\)\(CI\)\(IO\)\(F\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES:\(RX\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL RESTRICTED APPLICATION PACKAGES:\(RX\)'
- stdout_line must match the pattern '(?i)APPLICATION PACKAGE AUTHORITY\\ALL RESTRICTED APPLICATION PACKAGES:\(OI\)\(CI\)\(IO\)\(GR,GE\)'
State Requirement : stderr_line must not exist - shell equals 'powershell'
- command equals 'icacls($env:windir)'
- pattern equals ':'
- exit_status equals '0'
- stdout_line equals 'C:\WINDOWS NT SERVICE\TrustedInstaller:(F)'
- stdout_line equals ' NT SERVICE\TrustedInstaller:(CI)(IO)(F)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(M)'
- stdout_line equals ' NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F)'
- stdout_line equals ' BUILTIN\Administrators:(M)'
- stdout_line equals ' BUILTIN\Administrators:(OI)(CI)(IO)(F)'
- stdout_line equals ' BUILTIN\Users:(RX)'
- stdout_line equals ' BUILTIN\Users:(OI)(CI)(IO)(GR,GE)'
- stdout_line equals ' CREATOR OWNER:(OI)(CI)(IO)(F)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX)'
- stdout_line equals ' APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE)'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT DomainRole FROM win32_computersystem'
- for all 'result' the following must be true:
- all domainrole must be equal to '4'
- for all 'result' the following must be true:
- all domainrole must be equal to '5'
- namespace equals 'root\cimv2'
- wql equals 'SELECT DomainRole FROM win32_computersystem'
- collected 'result' result:
- domainrole = '5'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '([Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("System", [System.Security.AccessControl.RegistryRights]::ReadPermissions)).GetAccessControl().Access | Where-Object { $_.RegistryRights -notmatch '\d+' } | ForEach-Object { "Identity:$($_.IdentityReference), Rights: $($_.RegistryRights), Access: $($_.AccessControlType), IsInherited: $($_.IsInherited), InheritanceFlags: $($_.InheritanceFlags), PropagationFlags: $($_.PropagationFlags)" }'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '^Identity:NT AUTHORITY\\Authenticated Users, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:BUILTIN\\Administrators, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:NT AUTHORITY\\SYSTEM, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:CREATOR OWNER, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: (None|InheritOnly)$'
- stdout_line must match the pattern '^Identity:APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:BUILTIN\\Server Operators, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:S-1-15-3-1024-1065365936-1281604716-3511738428-1654721687-432734479-3232135806-4053264122-3456934681, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- shell equals 'powershell'
- command equals '([Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("System", [System.Security.AccessControl.RegistryRights]::ReadPermissions)).GetAccessControl().Access | Where-Object { $_.RegistryRights -notmatch '\d+' } | ForEach-Object { "Identity:$($_.IdentityReference), Rights: $($_.RegistryRights), Access: $($_.AccessControlType), IsInherited: $($_.IsInherited), InheritanceFlags: $($_.InheritanceFlags), PropagationFlags: $($_.PropagationFlags)" }'
- pattern equals ''
- exit_status equals ''
- stdout_line equals 'Identity:NT AUTHORITY\Authenticated Users, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:NT AUTHORITY\SYSTEM, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:BUILTIN\Administrators, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:BUILTIN\Server Operators, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:S-1-15-3-1024-1065365936-1281604716-3511738428-1654721687-432734479-3232135806-4053264122-3456934681, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '([Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("System", [System.Security.AccessControl.RegistryRights]::ReadPermissions)).GetAccessControl().Access | Where-Object { $_.RegistryRights -notmatch '\d+' } | ForEach-Object { "Identity:$($_.IdentityReference), Rights: $($_.RegistryRights), Access: $($_.AccessControlType), IsInherited: $($_.IsInherited), InheritanceFlags: $($_.InheritanceFlags), PropagationFlags: $($_.PropagationFlags)" }'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '^Identity:BUILTIN\\Users, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:BUILTIN\\Administrators, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:NT AUTHORITY\\SYSTEM, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:CREATOR OWNER, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: (None|InheritOnly)$'
- stdout_line must match the pattern '^Identity:APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:S-1-15-3-1024-1065365936-1281604716-3511738428-1654721687-432734479-3232135806-4053264122-3456934681, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- shell equals 'powershell'
- command equals '([Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("System", [System.Security.AccessControl.RegistryRights]::ReadPermissions)).GetAccessControl().Access | Where-Object { $_.RegistryRights -notmatch '\d+' } | ForEach-Object { "Identity:$($_.IdentityReference), Rights: $($_.RegistryRights), Access: $($_.AccessControlType), IsInherited: $($_.IsInherited), InheritanceFlags: $($_.InheritanceFlags), PropagationFlags: $($_.PropagationFlags)" }'
- pattern equals ''
- exit_status equals ''
- stdout_line equals 'Identity:NT AUTHORITY\Authenticated Users, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:NT AUTHORITY\SYSTEM, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:BUILTIN\Administrators, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:BUILTIN\Server Operators, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- stdout_line equals 'Identity:S-1-15-3-1024-1065365936-1281604716-3511738428-1654721687-432734479-3232135806-4053264122-3456934681, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: None, PropagationFlags: None'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '([Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("Security", [System.Security.AccessControl.RegistryRights]::ReadPermissions)).GetAccessControl().Access | Where-Object { $_.RegistryRights -notmatch '\d+' } | ForEach-Object { "Identity:$($_.IdentityReference), Rights: $($_.RegistryRights), Access: $($_.AccessControlType), IsInherited: $($_.IsInherited), InheritanceFlags: $($_.InheritanceFlags), PropagationFlags: $($_.PropagationFlags)" }'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '^Identity:NT AUTHORITY\\SYSTEM, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:BUILTIN\\Administrators, Rights: ReadPermissions, ChangePermissions, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- shell equals 'powershell'
- command equals '([Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("Security", [System.Security.AccessControl.RegistryRights]::ReadPermissions)).GetAccessControl().Access | Where-Object { $_.RegistryRights -notmatch '\d+' } | ForEach-Object { "Identity:$($_.IdentityReference), Rights: $($_.RegistryRights), Access: $($_.AccessControlType), IsInherited: $($_.IsInherited), InheritanceFlags: $($_.InheritanceFlags), PropagationFlags: $($_.PropagationFlags)" }'
- pattern equals ''
- exit_status equals ''
- stdout_line equals 'Identity:NT AUTHORITY\SYSTEM, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: ContainerInherit, PropagationFlags: None'
- stdout_line equals 'Identity:BUILTIN\Administrators, Rights: ReadPermissions, ChangePermissions, Access: Allow, IsInherited: False, InheritanceFlags: ContainerInherit, PropagationFlags: None'
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '([Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("Software", [System.Security.AccessControl.RegistryRights]::ReadPermissions)).GetAccessControl().Access | Where-Object { $_.RegistryRights -notmatch '\d+' } | ForEach-Object { "Identity:$($_.IdentityReference), Rights: $($_.RegistryRights), Access: $($_.AccessControlType), IsInherited: $($_.IsInherited), InheritanceFlags: $($_.InheritanceFlags), PropagationFlags: $($_.PropagationFlags)" }'
- for allstdout_line, at least one of the following must be true:
- stdout_line must match the pattern '^Identity:BUILTIN\\Users, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:BUILTIN\\Administrators, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:NT AUTHORITY\\SYSTEM, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:CREATOR OWNER, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: (None|InheritOnly)$'
- stdout_line must match the pattern '^Identity:APPLICATION PACKAGE AUTHORITY\\ALL APPLICATION PACKAGES, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- stdout_line must match the pattern '^Identity:S-1-15-3-1024-1065365936-1281604716-3511738428-1654721687-432734479-3232135806-4053264122-3456934681, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: (ContainerInherit|None), PropagationFlags: None$'
- shell equals 'powershell'
- command equals '([Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("Software", [System.Security.AccessControl.RegistryRights]::ReadPermissions)).GetAccessControl().Access | Where-Object { $_.RegistryRights -notmatch '\d+' } | ForEach-Object { "Identity:$($_.IdentityReference), Rights: $($_.RegistryRights), Access: $($_.AccessControlType), IsInherited: $($_.IsInherited), InheritanceFlags: $($_.InheritanceFlags), PropagationFlags: $($_.PropagationFlags)" }'
- pattern equals ''
- exit_status equals ''
- stdout_line equals 'Identity:CREATOR OWNER, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: ContainerInherit, PropagationFlags: None'
- stdout_line equals 'Identity:NT AUTHORITY\SYSTEM, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: ContainerInherit, PropagationFlags: None'
- stdout_line equals 'Identity:BUILTIN\Administrators, Rights: FullControl, Access: Allow, IsInherited: False, InheritanceFlags: ContainerInherit, PropagationFlags: None'
- stdout_line equals 'Identity:BUILTIN\Users, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: ContainerInherit, PropagationFlags: None'
- stdout_line equals 'Identity:APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: ContainerInherit, PropagationFlags: None'
- stdout_line equals 'Identity:S-1-15-3-1024-1065365936-1281604716-3511738428-1654721687-432734479-3232135806-4053264122-3456934681, Rights: ReadKey, Access: Allow, IsInherited: False, InheritanceFlags: ContainerInherit, PropagationFlags: None'
- true (One or more child tests must be true. (OR))
- false (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'module_name' must be equal to 'CimCmdlets'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'CimInstance'
- for 'parameters' the following must be true:
- class must be equal to 'Win32_Useraccount'
- filter must be equal to 'PasswordRequired=False and LocalAccount=True and Disabled=false'
- for 'select' the following must be true:
- first must be equal to '100'
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT DomainRole FROM win32_computersystem'
- for all 'result' the following must be true:
- all domainrole must be equal to '2'
- for all 'result' the following must be true:
- all domainrole must be equal to '3'
- namespace equals 'root\cimv2'
- wql equals 'SELECT DomainRole FROM win32_computersystem'
- collected 'result' result:
- domainrole = '5'
- check = 'module_name' must be equal to 'ActiveDirectory'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'ADUser'
- for 'parameters' the following must be true:
- filter must be equal to '(Enabled -eq $True) -and (PasswordNotRequired -eq $True)'
- properties must be equal to 'PasswordNotRequired'
- for 'select' the following must be true:
- first must be equal to '100'
- for no 'value' the following must be true:
- all passwordnotrequired must be equal (case insensitive) to 'true'
- all enabled must be equal (case insensitive) to 'true'
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT DomainRole FROM win32_computersystem'
- for all 'result' the following must be true:
- all domainrole must be equal to '4'
- for all 'result' the following must be true:
- all domainrole must be equal to '5'
- namespace equals 'root\cimv2'
- wql equals 'SELECT DomainRole FROM win32_computersystem'
- collected 'result' result:
- domainrole = '5'
- false (One or more child tests must be true. (OR))
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'module_name' must be equal to 'CimCmdlets'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'CimInstance'
- for 'parameters' the following must be true:
- class must be equal to 'Win32_Useraccount'
- filter must be equal to 'PasswordExpires=False and LocalAccount=True and Disabled=False'
- for 'select' the following must be true:
- first must be equal to '100'
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT DomainRole FROM win32_computersystem'
- for all 'result' the following must be true:
- all domainrole must be equal to '2'
- for all 'result' the following must be true:
- all domainrole must be equal to '3'
- namespace equals 'root\cimv2'
- wql equals 'SELECT DomainRole FROM win32_computersystem'
- collected 'result' result:
- domainrole = '5'
- check = 'module_name' must be equal to 'ActiveDirectory'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'ADUser'
- for 'parameters' the following must be true:
- properties must be equal to 'PasswordNeverExpires'
- filter must be equal to 'Enabled -eq $true -and PasswordNeverExpires -eq $true'
- for 'select' the following must be true:
- first must be equal to '100'
- module_name equals 'ActiveDirectory'
- module_id equals '{43c15630-959c-49e4-a977-758c5cc93408}'
- module_version equals '1.0.1.0'
- verb equals 'Get'
- noun equals 'ADUser'
- collected 'parameters' result:
- properties = 'PasswordNeverExpires'
- filter = 'Enabled -eq $true -and PasswordNeverExpires -eq $true'
- collected 'select' result:
- first = '100'
- collected 'value' result:
- distinguishedname = 'CN=Administrator,CN=Users,DC=lab,DC=local'
- enabled = 'True'
- givenname = Blank Value
- name = 'Administrator'
- objectclass = 'user'
- objectguid = '1d07a9a5-23b5-44a5-823a-1486be1dea16'
- passwordneverexpires = 'True'
- samaccountname = 'Administrator'
- sid = 'S-1-5-21-3939094207-3828562134-2660578157-500'
- surname = Blank Value
- userprincipalname = Blank Value
- collected 'value' result:
- distinguishedname = 'CN=Splunk Forwarder,OU=ServiceAccounts,OU=Lab,DC=lab,DC=local'
- enabled = 'True'
- givenname = Blank Value
- name = 'Splunk Forwarder'
- objectclass = 'user'
- objectguid = 'e4e0a3bb-d9aa-4355-b9a8-85e5951a05c8'
- passwordneverexpires = 'True'
- samaccountname = 'svc-splunk'
- sid = 'S-1-5-21-3939094207-3828562134-2660578157-1104'
- surname = Blank Value
- userprincipalname = 'svc-splunk@lab.local'
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT DomainRole FROM win32_computersystem'
- for all 'result' the following must be true:
- all domainrole must be equal to '4'
- for all 'result' the following must be true:
- all domainrole must be equal to '5'
- namespace equals 'root\cimv2'
- wql equals 'SELECT DomainRole FROM win32_computersystem'
- collected 'result' result:
- domainrole = '5'
- true (All child tests must be true. (AND))
- behavior requirements:
- recurse_direction = down
- check = 'path' must match the pattern '.*'
- check = 'filename' must match the pattern '.[Pp]12$'
- behavior requirements:
- recurse_direction = down
- check = 'path' must match the pattern '.*'
- check = 'filename' must match the pattern '.[Pp][Ff][Xx]$'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT startmode FROM Win32_Service WHERE name='fax''
- for all 'result' the following must be true:
- all startmode must be equal to 'Disabled'
- namespace equals 'root\cimv2'
- wql equals 'SELECT startmode FROM Win32_Service WHERE name='fax''
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT startmode FROM Win32_Service WHERE name='ftpsvc''
- namespace equals 'root\cimv2'
- wql equals 'SELECT startmode FROM Win32_Service WHERE name='ftpsvc''
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'service_name' must be equal to 'bthserv'
- check_existence = 'at_least_one_exists', check = all 'start_type' must be equal to 'SERVICE_AUTO_START'
- service_name equals 'bthserv'
- display_name equals 'Bluetooth Support Service'
- description equals 'The Bluetooth service supports discovery and association of remote Bluetooth devices. Stopping or disabling this service may cause already installed Bluetooth devices to fail to operate properly and prevent new devices from being discovered or associated.'
- service_type equals 'SERVICE_WIN32_SHARE_PROCESS'
- start_type equals 'SERVICE_DEMAND_START'
- current_state equals 'SERVICE_STOPPED'
- start_name equals 'NT AUTHORITY\LocalService'
- path equals 'C:\WINDOWS\system32\svchost.exe -k LocalService -p'
- pid equals '0'
- service_flag equals '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT startmode FROM Win32_Service WHERE name='PNRPSvc''
- for all 'result' the following must be true:
- all startmode must be equal to 'Disabled'
- namespace equals 'root\cimv2'
- wql equals 'SELECT startmode FROM Win32_Service WHERE name='PNRPSvc''
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT startmode FROM Win32_Service WHERE name='simptcp''
- namespace equals 'root\cimv2'
- wql equals 'SELECT startmode FROM Win32_Service WHERE name='simptcp''
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT installstate FROM win32_optionalfeature WHERE name = 'TelnetClient''
- for all 'result' the following must be true:
- at least one installstate must be equal to '2'
- namespace equals 'root\cimv2'
- wql equals 'SELECT installstate FROM win32_optionalfeature WHERE name = 'TelnetClient''
- collected 'result' result:
- installstate = '2'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT installstate FROM win32_optionalfeature WHERE name = 'TFTP''
- for all 'result' the following must be true:
- all installstate must be equal to '2'
- namespace equals 'root\cimv2'
- wql equals 'SELECT installstate FROM win32_optionalfeature WHERE name = 'TFTP''
- collected 'result' result:
- installstate = '2'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT installstate FROM win32_optionalfeature WHERE name = 'SMB1Protocol''
- for all 'result' the following must be true:
- at least one installstate must be equal to '2'
- namespace equals 'root\cimv2'
- wql equals 'SELECT installstate FROM win32_optionalfeature WHERE name = 'SMB1Protocol''
- collected 'result' result:
- installstate = '2'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters'
- check = 'name' must be equal to 'SMB1'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\mrxsmb10'
- check = 'name' must be equal to 'Start'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '4'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT installstate FROM win32_optionalfeature WHERE name = 'SMB1Protocol''
- for all 'result' the following must be true:
- at least one installstate must be equal to '2'
- namespace equals 'root\cimv2'
- wql equals 'SELECT installstate FROM win32_optionalfeature WHERE name = 'SMB1Protocol''
- collected 'result' result:
- installstate = '2'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters'
- check = 'name' must be equal to 'SMB1'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT installstate FROM win32_optionalfeature WHERE name = 'SMB1Protocol''
- for all 'result' the following must be true:
- at least one installstate must be equal to '2'
- namespace equals 'root\cimv2'
- wql equals 'SELECT installstate FROM win32_optionalfeature WHERE name = 'SMB1Protocol''
- collected 'result' result:
- installstate = '2'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\mrxsmb10'
- check = 'name' must be equal to 'Start'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '4'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT ID FROM Win32_ServerFeature'
- for all 'result' the following must be true:
- no id must be equal to '411'
- namespace equals 'root\cimv2'
- wql equals 'SELECT ID FROM Win32_ServerFeature'
- collected 'result' result:
- id = '10'
- collected 'result' result:
- id = '13'
- collected 'result' result:
- id = '6'
- collected 'result' result:
- id = '481'
- collected 'result' result:
- id = '255'
- collected 'result' result:
- id = '69'
- collected 'result' result:
- id = '418'
- collected 'result' result:
- id = '466'
- collected 'result' result:
- id = '420'
- collected 'result' result:
- id = '425'
- collected 'result' result:
- id = '412'
- collected 'result' result:
- id = '417'
- collected 'result' result:
- id = '67'
- collected 'result' result:
- id = '330'
- collected 'result' result:
- id = '331'
- collected 'result' result:
- id = '329'
- collected 'result' result:
- id = '257'
- collected 'result' result:
- id = '299'
- collected 'result' result:
- id = '273'
- collected 'result' result:
- id = '256'
- collected 'result' result:
- id = '482'
- collected 'result' result:
- id = '1043'
- collected 'result' result:
- id = '1003'
- collected 'result' result:
- id = '2110'
- collected 'result' result:
- id = '38'
- collected 'result' result:
- id = '340'
- collected 'result' result:
- id = '338'
- true (All child tests must be true. (AND))
- for userright, the following must be true:
- userright must be equal to 'SE_ASSIGNPRIMARYTOKEN_NAME'
- userright must be equal to 'SE_AUDIT_NAME'
- userright must be equal to 'SE_BACKUP_NAME'
- userright must be equal to 'SE_CHANGE_NOTIFY_NAME'
- userright must be equal to 'SE_CREATE_GLOBAL_NAME'
- userright must be equal to 'SE_CREATE_PAGEFILE_NAME'
- userright must be equal to 'SE_CREATE_PERMANENT_NAME'
- userright must be equal to 'SE_CREATE_SYMBOLIC_LINK_NAME'
- userright must be equal to 'SE_CREATE_TOKEN_NAME'
- userright must be equal to 'SE_DEBUG_NAME'
- userright must be equal to 'SE_ENABLE_DELEGATION_NAME'
- userright must be equal to 'SE_IMPERSONATE_NAME'
- userright must be equal to 'SE_INC_BASE_PRIORITY_NAME'
- userright must be equal to 'SE_INCREASE_QUOTA_NAME'
- userright must be equal to 'SE_INC_WORKING_SET_NAME'
- userright must be equal to 'SE_LOAD_DRIVER_NAME'
- userright must be equal to 'SE_LOCK_MEMORY_NAME'
- userright must be equal to 'SE_MACHINE_ACCOUNT_NAME'
- userright must be equal to 'SE_MANAGE_VOLUME_NAME'
- userright must be equal to 'SE_PROF_SINGLE_PROCESS_NAME'
- userright must be equal to 'SE_RELABEL_NAME'
- userright must be equal to 'SE_REMOTE_SHUTDOWN_NAME'
- userright must be equal to 'SE_RESTORE_NAME'
- userright must be equal to 'SE_SECURITY_NAME'
- userright must be equal to 'SE_SHUTDOWN_NAME'
- userright must be equal to 'SE_SYNC_AGENT_NAME'
- userright must be equal to 'SE_SYSTEM_ENVIRONMENT_NAME'
- userright must be equal to 'SE_SYSTEM_PROFILE_NAME'
- userright must be equal to 'SE_SYSTEMTIME_NAME'
- userright must be equal to 'SE_TAKE_OWNERSHIP_NAME'
- userright must be equal to 'SE_TCB_NAME'
- userright must be equal to 'SE_TIME_ZONE_NAME'
- userright must be equal to 'SE_TRUSTED_CREDMAN_ACCESS_NAME'
- userright must be equal to 'SE_UNDOCK_NAME'
- userright must be equal to 'SE_UNSOLICITED_INPUT_NAME'
- userright must be equal to 'SE_BATCH_LOGON_NAME'
- userright must be equal to 'SE_DENY_BATCH_LOGON_NAME'
- userright must be equal to 'SE_DENY_INTERACTIVE_LOGON_NAME'
- userright must be equal to 'SE_DENY_NETWORK_LOGON_NAME'
- userright must be equal to 'SE_DENY_REMOTE_INTERACTIVE_LOGON_NAME'
- userright must be equal to 'SE_DENY_SERVICE_LOGON_NAME'
- userright must be equal to 'SE_INTERACTIVE_LOGON_NAME'
- userright must be equal to 'SE_NETWORK_LOGON_NAME'
- userright must be equal to 'SE_REMOTE_INTERACTIVE_LOGON_NAME'
- userright must be equal to 'SE_SERVICE_LOGON_NAME'
- trustee_name matches the pattern '^$'
- trustee_sid matches the pattern '^S-'
- true (All child tests must be true. (AND))
- check = 'module_name' must be equal to 'Microsoft.Powershell.Management'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'ComputerInfo'
- for 'parameters' the following must be true:
- for 'select' the following must be true:
- property must be equal to 'biosfirmwaretype'
- for all 'value' the following must be true:
- all biosfirmwaretype must be equal (case insensitive) to 'UEFI'
- module_name equals 'Microsoft.PowerShell.Management'
- module_id equals '{eefcb906-b326-4e99-9f54-8b4bb6ef3c6d}'
- module_version equals '3.1.0.0'
- verb equals 'Get'
- noun equals 'ComputerInfo'
- collected 'parameters' result: does not exist
- collected 'select' result:
- property = 'biosfirmwaretype'
- collected 'value' result:
- biosfirmwaretype = 'Uefi'
- false (All child tests must be true. (AND))
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to 'Confirm-SecureBootUEFI'
- check_existence = 'at_least_one_exists', check = all 'stdout_line' must be equal to 'True'
- shell equals 'powershell'
- command equals 'Confirm-SecureBootUEFI'
- pattern equals ''
- exit_status equals ''
- stdout_line equals 'False'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'lockout_duration' must be less than or equal to '0'
- check_existence = 'at_least_one_exists', check = all 'lockout_duration' must be equal to '4294967295'
- force_logoff equals '1'
- lockout_duration equals '600'
- lockout_observation_window equals '600'
- lockout_threshold equals '0'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'lockout_duration' must be greater than or equal to '900'
- force_logoff equals '1'
- lockout_duration equals '600'
- lockout_observation_window equals '600'
- lockout_threshold equals '0'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'lockout_threshold' must be greater than '0'
- force_logoff equals '1'
- lockout_duration equals '600'
- lockout_observation_window equals '600'
- lockout_threshold equals '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'lockout_threshold' must be less than or equal to '3'
- force_logoff equals '1'
- lockout_duration equals '600'
- lockout_observation_window equals '600'
- lockout_threshold equals '0'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'lockout_threshold' must be greater than '0'
- force_logoff equals '1'
- lockout_duration equals '600'
- lockout_observation_window equals '600'
- lockout_threshold equals '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'lockout_observation_window' must be greater than or equal to '900'
- force_logoff equals '1'
- lockout_duration equals '600'
- lockout_observation_window equals '600'
- lockout_threshold equals '0'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'lockout_threshold' must be greater than '0'
- force_logoff equals '1'
- lockout_duration equals '600'
- lockout_observation_window equals '600'
- lockout_threshold equals '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'password_hist_len' must be greater than or equal to '24'
- max_passwd_age equals '3628800'
- min_passwd_age equals '86400'
- min_passwd_len equals '7'
- password_hist_len equals '24'
- password_complexity equals '1'
- reversible_encryption equals '0'
- anonymous_name_lookup equals '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'max_passwd_age' must be less than or equal to '5184000'
- check_existence = 'at_least_one_exists', check = all 'max_passwd_age' must be greater than '0'
- max_passwd_age equals '3628800'
- min_passwd_age equals '86400'
- min_passwd_len equals '7'
- password_hist_len equals '24'
- password_complexity equals '1'
- reversible_encryption equals '0'
- anonymous_name_lookup equals '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'min_passwd_age' must be greater than or equal to '86400'
- max_passwd_age equals '3628800'
- min_passwd_age equals '86400'
- min_passwd_len equals '7'
- password_hist_len equals '24'
- password_complexity equals '1'
- reversible_encryption equals '0'
- anonymous_name_lookup equals '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'password_complexity' must be equal to '1'
- max_passwd_age equals '3628800'
- min_passwd_age equals '86400'
- min_passwd_len equals '7'
- password_hist_len equals '24'
- password_complexity equals '1'
- reversible_encryption equals '0'
- anonymous_name_lookup equals '0'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- false (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- trustee_sid equals 'S-1-5-80-880578595-1860270145-482643319-2788375705-1540778122'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-19'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\EventLog\Application'
- check = 'name' must be equal to 'file'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '^(?i)%SystemRoot%.*$'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\EventLog\Application'
- name equals 'file'
- last_write_time equals '134338002050000000'
- type equals 'reg_expand_sz'
- value equals '%SystemRoot%\system32\winevt\Logs\Application.evtx'
- expanded_value equals 'C:\WINDOWS\system32\winevt\Logs\Application.evtx'
- windows_view equals '64_bit'
- Collect any available items.
- trustee_sid equals 'S-1-5-80-880578595-1860270145-482643319-2788375705-1540778122'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-19'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- false (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- trustee_sid equals 'S-1-5-80-880578595-1860270145-482643319-2788375705-1540778122'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-19'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\EventLog\Security'
- check = 'name' must be equal to 'file'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '^(?i)%SystemRoot%.*$'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\EventLog\Security'
- name equals 'file'
- last_write_time equals '134338002060000000'
- type equals 'reg_expand_sz'
- value equals '%SystemRoot%\System32\winevt\Logs\Security.evtx'
- expanded_value equals 'C:\WINDOWS\System32\winevt\Logs\Security.evtx'
- windows_view equals '64_bit'
- Collect any available items.
- trustee_sid equals 'S-1-5-80-880578595-1860270145-482643319-2788375705-1540778122'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-19'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- false (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- trustee_sid equals 'S-1-5-80-880578595-1860270145-482643319-2788375705-1540778122'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-19'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\EventLog\System'
- check = 'name' must be equal to 'file'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '^(?i)%SystemRoot%.*$'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\EventLog\System'
- name equals 'file'
- last_write_time equals '134338002050000000'
- type equals 'reg_expand_sz'
- value equals '%SystemRoot%\system32\winevt\Logs\System.evtx'
- expanded_value equals 'C:\WINDOWS\system32\winevt\Logs\System.evtx'
- windows_view equals '64_bit'
- Collect any available items.
- trustee_sid equals 'S-1-5-80-880578595-1860270145-482643319-2788375705-1540778122'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-19'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- trustee_sid equals 'S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'false'
- filepath equals 'C:\Windows\System32\eventvwr.exe'
- path equals 'C:\Windows\System32'
- filename equals 'eventvwr.exe'
- trustee_sid equals 'S-1-15-2-1'
- trustee_name equals 'APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES'
- standard_delete equals '0'
- standard_read_control equals '1'
- standard_write_dac equals '0'
- standard_write_owner equals '0'
- standard_synchronize equals '1'
- access_system_security equals '0'
- generic_read equals '1'
- generic_write equals '0'
- generic_execute equals '1'
- generic_all equals '0'
- file_read_data equals '1'
- file_write_data equals '0'
- file_append_data equals '0'
- file_read_ea equals '1'
- file_write_ea equals '0'
- file_execute equals '1'
- file_delete_child equals '0'
- file_read_attributes equals '1'
- file_write_attributes equals '0'
- windows_view equals '64_bit'
- filepath equals 'C:\Windows\System32\eventvwr.exe'
- path equals 'C:\Windows\System32'
- filename equals 'eventvwr.exe'
- trustee_sid equals 'S-1-5-32-545'
- trustee_name equals 'Users'
- standard_delete equals '0'
- standard_read_control equals '1'
- standard_write_dac equals '0'
- standard_write_owner equals '0'
- standard_synchronize equals '1'
- access_system_security equals '0'
- generic_read equals '1'
- generic_write equals '0'
- generic_execute equals '1'
- generic_all equals '0'
- file_read_data equals '1'
- file_write_data equals '0'
- file_append_data equals '0'
- file_read_ea equals '1'
- file_write_ea equals '0'
- file_execute equals '1'
- file_delete_child equals '0'
- file_read_attributes equals '1'
- file_write_attributes equals '0'
- windows_view equals '64_bit'
- filepath equals 'C:\Windows\System32\eventvwr.exe'
- path equals 'C:\Windows\System32'
- filename equals 'eventvwr.exe'
- trustee_sid equals 'S-1-5-32-544'
- trustee_name equals 'Administrators'
- standard_delete equals '0'
- standard_read_control equals '1'
- standard_write_dac equals '0'
- standard_write_owner equals '0'
- standard_synchronize equals '1'
- access_system_security equals '0'
- generic_read equals '1'
- generic_write equals '0'
- generic_execute equals '1'
- generic_all equals '0'
- file_read_data equals '1'
- file_write_data equals '0'
- file_append_data equals '0'
- file_read_ea equals '1'
- file_write_ea equals '0'
- file_execute equals '1'
- file_delete_child equals '0'
- file_read_attributes equals '1'
- file_write_attributes equals '0'
- windows_view equals '64_bit'
- filepath equals 'C:\Windows\System32\eventvwr.exe'
- path equals 'C:\Windows\System32'
- filename equals 'eventvwr.exe'
- trustee_sid equals 'S-1-15-2-2'
- trustee_name equals 'APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES'
- standard_delete equals '0'
- standard_read_control equals '1'
- standard_write_dac equals '0'
- standard_write_owner equals '0'
- standard_synchronize equals '1'
- access_system_security equals '0'
- generic_read equals '1'
- generic_write equals '0'
- generic_execute equals '1'
- generic_all equals '0'
- file_read_data equals '1'
- file_write_data equals '0'
- file_append_data equals '0'
- file_read_ea equals '1'
- file_write_ea equals '0'
- file_execute equals '1'
- file_delete_child equals '0'
- file_read_attributes equals '1'
- file_write_attributes equals '0'
- windows_view equals '64_bit'
- filepath equals 'C:\Windows\System32\eventvwr.exe'
- path equals 'C:\Windows\System32'
- filename equals 'eventvwr.exe'
- trustee_sid equals 'S-1-5-18'
- trustee_name equals 'NT AUTHORITY\SYSTEM'
- standard_delete equals '0'
- standard_read_control equals '1'
- standard_write_dac equals '0'
- standard_write_owner equals '0'
- standard_synchronize equals '1'
- access_system_security equals '0'
- generic_read equals '1'
- generic_write equals '0'
- generic_execute equals '1'
- generic_all equals '0'
- file_read_data equals '1'
- file_write_data equals '0'
- file_append_data equals '0'
- file_read_ea equals '1'
- file_write_ea equals '0'
- file_execute equals '1'
- file_delete_child equals '0'
- file_read_attributes equals '1'
- file_write_attributes equals '0'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'credential_validation' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'credential_validation' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'credential_validation' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'credential_validation' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'other_account_management_events' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'other_account_management_events' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'security_group_management' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'security_group_management' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'user_account_management' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'user_account_management' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'user_account_management' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'user_account_management' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'pnp_activity' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'pnp_activity' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'process_creation' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'process_creation' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'account_lockout' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'account_lockout' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'account_lockout' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'account_lockout' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'group_membership' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'group_membership' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'logoff' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'logoff' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'logon' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'logon' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'logon' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'logon' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'special_logon' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'special_logon' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'other_object_access_events' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'other_object_access_events' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'other_object_access_events' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'other_object_access_events' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'removable_storage' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'removable_storage' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'removable_storage' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'removable_storage' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'audit_policy_change' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'audit_policy_change' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'audit_policy_change' must be equal to 'AUDIT_SUCCESS_FAILURE'
- check_existence = 'at_least_one_exists', check = all 'audit_policy_change' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'authentication_policy_change' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'authentication_policy_change' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'authorization_policy_change' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'authorization_policy_change' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'sensitive_privilege_use' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'sensitive_privilege_use' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'sensitive_privilege_use' must be equal to 'AUDIT_FAILURE'
- check_existence = 'at_least_one_exists', check = all 'sensitive_privilege_use' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'ipsec_driver' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'ipsec_driver' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'ipsec_driver' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'ipsec_driver' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'other_system_events' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'other_system_events' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'other_system_events' must be equal to 'AUDIT_FAILURE'
- check_existence = 'at_least_one_exists', check = all 'other_system_events' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'security_state_change' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'security_state_change' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'security_system_extension' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'security_system_extension' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'system_integrity' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'system_integrity' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'system_integrity' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'system_integrity' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\Personalization'
- check = 'name' must be equal to 'NoLockScreenSlideshow'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\LanmanWorkstation'
- check = 'name' must be equal to 'AllowInsecureGuestAuth'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\NetworkProvider\HardenedPaths'
- check = 'name' must be equal to '\\*\SYSVOL'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '(^| *, *)RequireMutualAuthentication=1( *, *|$)'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = no 'value' can match the pattern '(^|[ *, *])RequireMutualAuthentication=(?!1( *, *|$))'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '(^| *, *)RequireIntegrity=1( *, *|$)'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = no 'value' can match the pattern '(^| *, *)RequireIntegrity=(?!1( *, *|$))'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\NetworkProvider\HardenedPaths'
- check = 'name' must be equal to '\\*\NETLOGON'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '(^| *, *)RequireMutualAuthentication=1( *, *|$)'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = no 'value' can match the pattern '(^|[ *, *])RequireMutualAuthentication=(?!1( *, *|$))'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '(^| *, *)RequireIntegrity=1( *, *|$)'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = no 'value' can match the pattern '(^| *, *)RequireIntegrity=(?!1( *, *|$))'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Audit'
- check = 'name' must be equal (case insensitive) to 'ProcessCreationIncludeCmdLine_Enabled'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\CredentialsDelegation'
- check = 'name' must be equal to 'AllowProtectedCreds'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- check = 'module_name' must be equal to 'CimCmdlets'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'CimInstance'
- for 'parameters' the following must be true:
- classname must be equal to 'Win32_DeviceGuard'
- namespace must be equal to 'root\Microsoft\Windows\DeviceGuard'
- for 'select' the following must be true:
- property must be equal to 'RequiredSecurityProperties'
- for only one 'value' the following must be true:
- all requiredsecurityproperties must match the pattern '2'
- module_name equals 'CimCmdlets'
- module_id equals '{fb6cc51d-c096-4b38-b78d-0fed6277096a}'
- module_version equals '1.0.0.0'
- verb equals 'Get'
- noun equals 'CimInstance'
- collected 'parameters' result:
- classname = 'Win32_DeviceGuard'
- namespace = 'root\Microsoft\Windows\DeviceGuard'
- collected 'select' result:
- property = 'RequiredSecurityProperties'
- collected 'value' result:
- requiredsecurityproperties = '{0}'
- check = 'module_name' must be equal to 'CimCmdlets'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'CimInstance'
- for 'parameters' the following must be true:
- classname must be equal to 'Win32_DeviceGuard'
- namespace must be equal to 'root\Microsoft\Windows\DeviceGuard'
- for 'select' the following must be true:
- property must be equal to 'VirtualizationBasedSecurityStatus'
- for only one 'value' the following must be true:
- all virtualizationbasedsecuritystatus must be equal to '2'
- module_name equals 'CimCmdlets'
- module_id equals '{fb6cc51d-c096-4b38-b78d-0fed6277096a}'
- module_version equals '1.0.0.0'
- verb equals 'Get'
- noun equals 'CimInstance'
- collected 'parameters' result:
- classname = 'Win32_DeviceGuard'
- namespace = 'root\Microsoft\Windows\DeviceGuard'
- collected 'select' result:
- property = 'VirtualizationBasedSecurityStatus'
- collected 'value' result:
- virtualizationbasedsecuritystatus = '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'System\CurrentControlSet\Policies\EarlyLaunch'
- check = 'name' must be equal to 'DriverLoadPolicy'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '3'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '8'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows NT\Printers'
- check = 'name' must be equal to 'DisableWebPnPDownload'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows NT\Printers'
- check = 'name' must be equal to 'DisableHTTPPrinting'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\System'
- check = 'name' must be equal to 'DontDisplayNetworkSelectionUI'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51'
- check = 'name' must be equal to 'DCSettingIndex'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51'
- check = 'name' must be equal to 'ACSettingIndex'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\CredUI'
- check = 'name' must be equal to 'EnumerateAdministrators'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\DataCollection'
- check = 'name' must be equal to 'AllowTelemetry'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SOFTWARE\Policies\Microsoft\Windows\EventLog\Application'
- check = 'name' must be equal (case insensitive) to 'MaxSize'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be greater than or equal to '32768'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SOFTWARE\Policies\Microsoft\Windows\EventLog\Security'
- check = 'name' must be equal (case insensitive) to 'MaxSize'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be greater than or equal to '5120000'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SOFTWARE\Policies\Microsoft\Windows\EventLog\System'
- check = 'name' must be equal (case insensitive) to 'MaxSize'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be greater than or equal to '32768'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\System'
- check = 'name' must be equal to 'EnableSmartScreen'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\Explorer'
- check = 'name' must be equal to 'NoDataExecutionPrevention'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer'
- check = 'name' must be equal to 'PreXPSP2ShellProtocolBehavior'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services'
- check = 'name' must be equal to 'DisablePasswordSaving'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows NT\Terminal Services'
- check = 'name' must be equal to 'fDisableCdm'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services'
- check = 'name' must be equal to 'fPromptForPassword'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows NT\Terminal Services'
- check = 'name' must be equal to 'fEncryptRPCTraffic'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows NT\Terminal Services'
- check = 'name' must be equal to 'MinEncryptionLevel'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '3'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Internet Explorer\Feeds'
- check = 'name' must be equal to 'DisableEnclosureDownload'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Internet Explorer\Feeds'
- check = 'name' must be equal to 'AllowBasicAuthInClear'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\Windows Search'
- check = 'name' must be equal to 'AllowIndexingEncryptedStoresOrItems'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\Installer'
- check = 'name' must be equal to 'EnableUserControl'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\Installer'
- check = 'name' must be equal to 'SafeForScripting'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'DisableAutomaticRestartSignOn'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'DisableAutomaticRestartSignOn'
- last_write_time equals '134337591420000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SOFTWARE\Policies\Microsoft\Windows\PowerShell\ScriptBlockLogging'
- check = 'name' must be equal (case insensitive) to 'EnableScriptBlockLogging'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\WinRM\Client'
- check = 'name' must be equal to 'AllowUnencryptedTraffic'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\WinRM\Client'
- check = 'name' must be equal to 'AllowDigest'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\WinRM\Service'
- check = 'name' must be equal to 'AllowUnencryptedTraffic'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\WinRM\Service'
- check = 'name' must be equal to 'DisableRunAs'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\PowerShell\Transcription'
- check = 'name' must be equal to 'EnableTranscripting'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\rsop\computer'
- check = 'wql' must be equal to 'SELECT setting FROM RSOP_SecuritySettingBoolean WHERE KeyName='TicketValidateClient''
- for all 'result' the following must be true:
- all setting must be equal to '-1'
- for all 'result' the following must be true:
- all setting must be equal to '1'
- namespace equals 'root\rsop\computer'
- wql equals 'SELECT setting FROM RSOP_SecuritySettingBoolean WHERE KeyName='TicketValidateClient''
- collected 'result' result:
- setting = '1'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\rsop\computer'
- check = 'wql' must be equal to 'SELECT setting FROM RSOP_SecuritySettingNumeric WHERE KeyName='MaxServiceAge''
- for all 'result' the following must be true:
- all setting must be less than or equal to '600'
- for all 'result' the following must be true:
- all setting must be greater than '0'
- namespace equals 'root\rsop\computer'
- wql equals 'SELECT setting FROM RSOP_SecuritySettingNumeric WHERE KeyName='MaxServiceAge''
- collected 'result' result:
- setting = '600'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\rsop\computer'
- check = 'wql' must be equal to 'SELECT setting FROM RSOP_SecuritySettingNumeric WHERE KeyName='MaxTicketAge''
- for all 'result' the following must be true:
- all setting must be less than or equal to '10'
- for all 'result' the following must be true:
- all setting must be greater than '0'
- namespace equals 'root\rsop\computer'
- wql equals 'SELECT setting FROM RSOP_SecuritySettingNumeric WHERE KeyName='MaxTicketAge''
- collected 'result' result:
- setting = '10'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\rsop\computer'
- check = 'wql' must be equal to 'SELECT setting FROM RSOP_SecuritySettingNumeric WHERE KeyName='MaxRenewAge''
- for all 'result' the following must be true:
- all setting must be less than or equal to '7'
- namespace equals 'root\rsop\computer'
- wql equals 'SELECT setting FROM RSOP_SecuritySettingNumeric WHERE KeyName='MaxRenewAge''
- collected 'result' result:
- setting = '7'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'namespace' must be equal to 'root\rsop\computer'
- check = 'wql' must be equal to 'SELECT setting FROM RSOP_SecuritySettingNumeric WHERE KeyName='MaxClockSkew''
- for all 'result' the following must be true:
- all setting must be less than or equal to '5'
- namespace equals 'root\rsop\computer'
- wql equals 'SELECT setting FROM RSOP_SecuritySettingNumeric WHERE KeyName='MaxClockSkew''
- collected 'result' result:
- setting = '5'
- true (All child tests must be true. (AND))
- check = 'shell' must be equal to 'powershell'
- for command, the following must be true:
- command must be equal to 'get-smbshare | where-object {$_.Name -notin 'NETLOGON','SYSVOL','IPC$','ADMIN$','C$'} | Select-Object -property name,PATH'
- check = 'pattern' must be equal to ' ([a-zA-Z]):\\'
- check_existence = 'at_least_one_exists', check = all 'shell' must be equal to 'powershell'
- for allsubexpression, the following must be true:
- subexpression must not be equal (case insensitive) to 'C'
- shell equals 'powershell'
- command equals 'get-smbshare | where-object {$_.Name -notin 'NETLOGON','SYSVOL','IPC$','ADMIN$','C$'} | Select-Object -property name,PATH'
- pattern equals ' ([a-zA-Z]):\\'
- exit_status equals ''
- false (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$gGuid='f30e3bc2-9ff0-11d1-b603-0000f80367c1'; $zGuid='00000000-0000-0000-0000-000000000000'; $gpos=Get-ADObject -Filter "objectClass -eq 'groupPolicyContainer'" -SearchBase ("CN=Policies,CN=System,"+(Get-ADDomain).DistinguishedName) -Properties displayName; $results=foreach($gpo in $gpos){$path="AD:\$($gpo.DistinguishedName)"; $aud=(Get-Acl $path -Audit).Audit; $reasons=@(); $fRules=$aud|Where-Object{$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -match 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All')}; $vFail=$fRules|Where-Object{$_.InheritanceType -ne 'None' -and ($_.InheritedObjectType.ToString() -eq $zGuid -or $_.InheritedObjectType.ToString() -eq $gGuid)}; if(-not $fRules){$reasons+='MISSING: Everyone to Failure to GenericAll/FullControl audit policy'}elseif(-not $vFail){if($fRules|Where-Object{$_.InheritanceType -eq 'None'}){$reasons+='INVALID SCOPE: Everyone to Failure policy is set to This Object Only (Requires Inheritance)'}else{$reasons+='INVALID SCOPE: Everyone to Failure policy inherits to an incorrect object type (Must be All or groupPolicyContainer)'}}; $sRules=$aud|Where-Object{$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -match 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty')}; $vSucc=$sRules|Where-Object{$_.InheritanceType -ne 'None' -and ($_.InheritedObjectType.ToString() -eq $zGuid -or $_.InheritedObjectType.ToString() -eq $gGuid)}; if(-not $sRules){$reasons+='MISSING: Everyone to Success to ExtendedRight/WriteProperty audit policy'}elseif(-not $vSucc){if($sRules|Where-Object{$_.InheritanceType -eq 'None'}){$reasons+='INVALID SCOPE: Everyone to Success policy is set to This Object Only (Requires Inheritance)'}else{$reasons+='INVALID SCOPE: Everyone to Success policy inherits to an incorrect object type (Must be All or groupPolicyContainer)'}}; if($reasons.Count -gt 0){"Target_Object=$($gpo.displayName) | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details=$($reasons -join ' - ')"}}; if($results){$results}else{"Target_Object=All GPOs | IdentityReference=Everyone (S-1-1-0) | Status=PASS | Details=All Active Directory GPO audit ACLs are STIG compliant with correct inheritance scopes."}'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern '=FAIL '
- shell equals 'powershell'
- command equals '$gGuid='f30e3bc2-9ff0-11d1-b603-0000f80367c1'; $zGuid='00000000-0000-0000-0000-000000000000'; $gpos=Get-ADObject -Filter "objectClass -eq 'groupPolicyContainer'" -SearchBase ("CN=Policies,CN=System,"+(Get-ADDomain).DistinguishedName) -Properties displayName; $results=foreach($gpo in $gpos){$path="AD:\$($gpo.DistinguishedName)"; $aud=(Get-Acl $path -Audit).Audit; $reasons=@(); $fRules=$aud|Where-Object{$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -match 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All')}; $vFail=$fRules|Where-Object{$_.InheritanceType -ne 'None' -and ($_.InheritedObjectType.ToString() -eq $zGuid -or $_.InheritedObjectType.ToString() -eq $gGuid)}; if(-not $fRules){$reasons+='MISSING: Everyone to Failure to GenericAll/FullControl audit policy'}elseif(-not $vFail){if($fRules|Where-Object{$_.InheritanceType -eq 'None'}){$reasons+='INVALID SCOPE: Everyone to Failure policy is set to This Object Only (Requires Inheritance)'}else{$reasons+='INVALID SCOPE: Everyone to Failure policy inherits to an incorrect object type (Must be All or groupPolicyContainer)'}}; $sRules=$aud|Where-Object{$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -match 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty')}; $vSucc=$sRules|Where-Object{$_.InheritanceType -ne 'None' -and ($_.InheritedObjectType.ToString() -eq $zGuid -or $_.InheritedObjectType.ToString() -eq $gGuid)}; if(-not $sRules){$reasons+='MISSING: Everyone to Success to ExtendedRight/WriteProperty audit policy'}elseif(-not $vSucc){if($sRules|Where-Object{$_.InheritanceType -eq 'None'}){$reasons+='INVALID SCOPE: Everyone to Success policy is set to This Object Only (Requires Inheritance)'}else{$reasons+='INVALID SCOPE: Everyone to Success policy inherits to an incorrect object type (Must be All or groupPolicyContainer)'}}; if($reasons.Count -gt 0){"Target_Object=$($gpo.displayName) | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details=$($reasons -join ' - ')"}}; if($results){$results}else{"Target_Object=All GPOs | IdentityReference=Everyone (S-1-1-0) | Status=PASS | Details=All Active Directory GPO audit ACLs are STIG compliant with correct inheritance scopes."}'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'Target_Object=Default Domain Policy | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details=MISSING: Everyone to Failure to GenericAll/FullControl audit policy'
- stdout_line equals 'Target_Object=Default Domain Controllers Policy | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details=MISSING: Everyone to Failure to GenericAll/FullControl audit policy'
- false (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$path = 'AD:\' + (Get-ADDomain).DistinguishedName; $aud = (Get-Acl $path -Audit).Audit; $hasFail = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All')}); $hasSucc = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty')}); . { if (-not $hasFail -or -not $hasSucc) { $reasons = @(); if (-not $hasFail) { $reasons += 'MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy' }; if (-not $hasSucc) { $reasons += 'MISSING: Everyone -> Success -> ExtendedRight/WriteProperty audit policy' }; [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'FAIL'; Details = ($reasons -join ' | ') } } else { [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'PASS'; Details = 'All mandatory Failure and Success audit policies are correctly configured per the STIG.' } } } | Format-Table -AutoSize | Out-String -Width 4096'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern ' FAIL '
- shell equals 'powershell'
- command equals '$path = 'AD:\' + (Get-ADDomain).DistinguishedName; $aud = (Get-Acl $path -Audit).Audit; $hasFail = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All')}); $hasSucc = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty')}); . { if (-not $hasFail -or -not $hasSucc) { $reasons = @(); if (-not $hasFail) { $reasons += 'MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy' }; if (-not $hasSucc) { $reasons += 'MISSING: Everyone -> Success -> ExtendedRight/WriteProperty audit policy' }; [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'FAIL'; Details = ($reasons -join ' | ') } } else { [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'PASS'; Details = 'All mandatory Failure and Success audit policies are correctly configured per the STIG.' } } } | Format-Table -AutoSize | Out-String -Width 4096'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'Target_Object IdentityReference Status Details '
- stdout_line equals '------------- ----------------- ------ ------- '
- stdout_line equals 'DC=lab,DC=local Everyone (S-1-1-0) FAIL MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy'
- false (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$path = 'AD:\CN=Infrastructure,' + (Get-ADDomain).DistinguishedName; $aud = (Get-Acl $path -Audit).Audit; $hasFail = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All')}); $hasSucc = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty')}); . { if (-not $hasFail -or -not $hasSucc) { $reasons = @(); if (-not $hasFail) { $reasons += 'MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy' }; if (-not $hasSucc) { $reasons += 'MISSING: Everyone -> Success -> ExtendedRight/WriteProperty audit policy' }; [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'FAIL'; Details = ($reasons -join ' | ') } } else { [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'PASS'; Details = 'All mandatory Failure and Success audit policies are correctly configured per the STIG.' } } } | Format-Table -AutoSize | Out-String -Width 4096'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern ' FAIL '
- shell equals 'powershell'
- command equals '$path = 'AD:\CN=Infrastructure,' + (Get-ADDomain).DistinguishedName; $aud = (Get-Acl $path -Audit).Audit; $hasFail = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All')}); $hasSucc = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty')}); . { if (-not $hasFail -or -not $hasSucc) { $reasons = @(); if (-not $hasFail) { $reasons += 'MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy' }; if (-not $hasSucc) { $reasons += 'MISSING: Everyone -> Success -> ExtendedRight/WriteProperty audit policy' }; [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'FAIL'; Details = ($reasons -join ' | ') } } else { [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'PASS'; Details = 'All mandatory Failure and Success audit policies are correctly configured per the STIG.' } } } | Format-Table -AutoSize | Out-String -Width 4096'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'Target_Object IdentityReference Status Details '
- stdout_line equals '------------- ----------------- ------ ------- '
- stdout_line equals 'CN=Infrastructure,DC=lab,DC=local Everyone (S-1-1-0) FAIL MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy'
- false (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$domain = Get-ADDomain; $path = 'AD:\' + $domain.DomainControllersContainer; $aud = (Get-Acl $path -Audit).Audit; $hasFail = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All') -and $_.InheritanceType -eq 'All' -and $_.IsInherited -eq $false}); $hasSuccSelf = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and $_.InheritanceType -eq 'None' -and $_.IsInherited -eq $false}); $hasSuccDesc = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'WriteProperty|WriteAllProperties') -and $_.InheritanceType -eq 'All' -and $_.IsInherited -eq $false}); . { $t = $path.Replace('AD:\',''); if (-not $hasFail -or -not $hasSuccSelf -or -not $hasSuccDesc) { $reasons = @(); if (-not $hasFail) { $reasons += 'MISSING: Explicit Everyone : Failure : FullControl [Applies to: All Descendant Objects]' }; if (-not $hasSuccSelf) { $reasons += 'MISSING: Explicit Everyone : Success : Special [Applies to: This Object Only]' }; if (-not $hasSuccDesc) { $reasons += 'MISSING: Explicit Everyone : Success : Write all properties [Applies to: All Descendant Objects]' }; 'Target_Object=' + $t + ' | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details=' + ($reasons -join ' ; ') } else { 'Target_Object=' + $t + ' | IdentityReference=Everyone (S-1-1-0) | Status=PASS | Details=All mandatory Failure and Success audit entries and scopes are correctly configured per SV-254404r958732.' } }'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern '=FAIL '
- shell equals 'powershell'
- command equals '$domain = Get-ADDomain; $path = 'AD:\' + $domain.DomainControllersContainer; $aud = (Get-Acl $path -Audit).Audit; $hasFail = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All') -and $_.InheritanceType -eq 'All' -and $_.IsInherited -eq $false}); $hasSuccSelf = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and $_.InheritanceType -eq 'None' -and $_.IsInherited -eq $false}); $hasSuccDesc = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'WriteProperty|WriteAllProperties') -and $_.InheritanceType -eq 'All' -and $_.IsInherited -eq $false}); . { $t = $path.Replace('AD:\',''); if (-not $hasFail -or -not $hasSuccSelf -or -not $hasSuccDesc) { $reasons = @(); if (-not $hasFail) { $reasons += 'MISSING: Explicit Everyone : Failure : FullControl [Applies to: All Descendant Objects]' }; if (-not $hasSuccSelf) { $reasons += 'MISSING: Explicit Everyone : Success : Special [Applies to: This Object Only]' }; if (-not $hasSuccDesc) { $reasons += 'MISSING: Explicit Everyone : Success : Write all properties [Applies to: All Descendant Objects]' }; 'Target_Object=' + $t + ' | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details=' + ($reasons -join ' ; ') } else { 'Target_Object=' + $t + ' | IdentityReference=Everyone (S-1-1-0) | Status=PASS | Details=All mandatory Failure and Success audit entries and scopes are correctly configured per SV-254404r958732.' } }'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'Target_Object=OU=Domain Controllers,DC=lab,DC=local | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details=MISSING: Explicit Everyone : Failure : FullControl [Applies to: All Descendant Objects]'
- false (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$p='AD:\CN=AdminSDHolder,CN=System,'+(Get-ADDomain).DistinguishedName;$a=(Get-Acl $p -Audit).Audit;$f=[bool]($a|Where-Object{$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All') -and $_.InheritanceType -eq 'None'});$s=[bool]($a|Where-Object{$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty') -and $_.InheritanceType -eq 'None'});if(-not $f -or -not $s){$r=@();if(-not $f){$r+='MISSING/INVALID: Everyone [Failure] GenericAll/FullControl (Must be This object only)'};if(-not $s){$r+='MISSING/INVALID: Everyone [Success] ExtendedRight/WriteProperty (Must be This object only)'};'Target_Object={0} | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details={1}' -f $p.Replace('AD:\',''),($r -join ' / ')}else{'Target_Object={0} | IdentityReference=Everyone (S-1-1-0) | Status=PASS | Details=All mandatory Failure and Success audit policies are correctly configured per the STIG.' -f $p.Replace('AD:\','')}'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern '=FAIL '
- shell equals 'powershell'
- command equals '$p='AD:\CN=AdminSDHolder,CN=System,'+(Get-ADDomain).DistinguishedName;$a=(Get-Acl $p -Audit).Audit;$f=[bool]($a|Where-Object{$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All') -and $_.InheritanceType -eq 'None'});$s=[bool]($a|Where-Object{$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty') -and $_.InheritanceType -eq 'None'});if(-not $f -or -not $s){$r=@();if(-not $f){$r+='MISSING/INVALID: Everyone [Failure] GenericAll/FullControl (Must be This object only)'};if(-not $s){$r+='MISSING/INVALID: Everyone [Success] ExtendedRight/WriteProperty (Must be This object only)'};'Target_Object={0} | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details={1}' -f $p.Replace('AD:\',''),($r -join ' / ')}else{'Target_Object={0} | IdentityReference=Everyone (S-1-1-0) | Status=PASS | Details=All mandatory Failure and Success audit policies are correctly configured per the STIG.' -f $p.Replace('AD:\','')}'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'Target_Object=CN=AdminSDHolder,CN=System,DC=lab,DC=local | IdentityReference=Everyone (S-1-1-0) | Status=FAIL | Details=MISSING/INVALID: Everyone [Failure] GenericAll/FullControl (Must be This object only)'
- false (All child tests must be true. (AND))
- behavior requirements:
- error_if_stderr_exists = true
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$path = 'AD:\CN=RID Manager$,CN=System,' + (Get-ADDomain).DistinguishedName; $aud = (Get-Acl $path -Audit).Audit; $hasFail = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All')}); $hasSucc = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty')}); . { if (-not $hasFail -or -not $hasSucc) { $reasons = @(); if (-not $hasFail) { $reasons += 'MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy' }; if (-not $hasSucc) { $reasons += 'MISSING: Everyone -> Success -> ExtendedRight/WriteProperty audit policy' }; [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'FAIL'; Details = ($reasons -join ' | ') } } else { [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'PASS'; Details = 'All mandatory Failure and Success audit policies are correctly configured per the STIG.' } } } | Format-Table -AutoSize | Out-String -Width 4096'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern ' FAIL '
- shell equals 'powershell'
- command equals '$path = 'AD:\CN=RID Manager$,CN=System,' + (Get-ADDomain).DistinguishedName; $aud = (Get-Acl $path -Audit).Audit; $hasFail = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Failure' -and ($_.ActiveDirectoryRights -match 'GenericAll|FullControl|All')}); $hasSucc = [bool]($aud | Where-Object {$_.IdentityReference -match 'Everyone|S-1-1-0' -and $_.AuditFlags -eq 'Success' -and ($_.ActiveDirectoryRights -match 'ExtendedRight|WriteProperty')}); . { if (-not $hasFail -or -not $hasSucc) { $reasons = @(); if (-not $hasFail) { $reasons += 'MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy' }; if (-not $hasSucc) { $reasons += 'MISSING: Everyone -> Success -> ExtendedRight/WriteProperty audit policy' }; [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'FAIL'; Details = ($reasons -join ' | ') } } else { [PSCustomObject]@{ Target_Object = $path.Replace('AD:\',''); IdentityReference = 'Everyone (S-1-1-0)'; Status = 'PASS'; Details = 'All mandatory Failure and Success audit policies are correctly configured per the STIG.' } } } | Format-Table -AutoSize | Out-String -Width 4096'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'Target_Object IdentityReference Status Details '
- stdout_line equals '------------- ----------------- ------ ------- '
- stdout_line equals 'CN=RID Manager$,CN=System,DC=lab,DC=local Everyone (S-1-1-0) FAIL MISSING: Everyone -> Failure -> GenericAll/FullControl audit policy'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'computer_account_management' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'computer_account_management' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'directory_service_access' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'directory_service_access' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'directory_service_access' must be equal to 'AUDIT_FAILURE'
- check_existence = 'at_least_one_exists', check = all 'directory_service_access' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'directory_service_changes' must be equal to 'AUDIT_SUCCESS'
- check_existence = 'at_least_one_exists', check = all 'directory_service_changes' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'directory_service_changes' must be equal to 'AUDIT_FAILURE'
- check_existence = 'at_least_one_exists', check = all 'directory_service_changes' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- check = 'module_name' must be equal to 'Microsoft.Powershell.Management'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'ChildItem'
- for 'parameters' the following must be true:
- path must be equal to 'Cert:\LocalMachine\my'
- for 'select' the following must be true:
- property must be equal to 'issuer,thumbprint'
- false (All child tests must be true. (AND))
- check = 'module_name' must be equal to 'ActiveDirectory'
- check = 'verb' must be equal to 'Get'
- check = 'noun' must be equal to 'ADUser'
- for 'parameters' the following must be true:
- filter must be equal to '(Enabled -eq $True) -and (SmartcardLogonRequired -eq $False)'
- for 'select' the following must be true:
- first must be equal to '100'
- module_name equals 'ActiveDirectory'
- module_id equals '{43c15630-959c-49e4-a977-758c5cc93408}'
- module_version equals '1.0.1.0'
- verb equals 'Get'
- noun equals 'ADUser'
- collected 'parameters' result:
- filter = '(Enabled -eq $True) -and (SmartcardLogonRequired -eq $False)'
- collected 'select' result:
- first = '100'
- collected 'value' result:
- distinguishedname = 'CN=Administrator,CN=Users,DC=lab,DC=local'
- enabled = 'True'
- givenname = Blank Value
- name = 'Administrator'
- objectclass = 'user'
- objectguid = '1d07a9a5-23b5-44a5-823a-1486be1dea16'
- samaccountname = 'Administrator'
- sid = 'S-1-5-21-3939094207-3828562134-2660578157-500'
- surname = Blank Value
- userprincipalname = Blank Value
- collected 'value' result:
- distinguishedname = 'CN=Lab User,OU=Users,OU=Lab,DC=lab,DC=local'
- enabled = 'True'
- givenname = Blank Value
- name = 'Lab User'
- objectclass = 'user'
- objectguid = '746c9502-de99-4618-acd1-a10959a4a835'
- samaccountname = 'labuser'
- sid = 'S-1-5-21-3939094207-3828562134-2660578157-1103'
- surname = Blank Value
- userprincipalname = 'labuser@lab.local'
- collected 'value' result:
- distinguishedname = 'CN=Splunk Forwarder,OU=ServiceAccounts,OU=Lab,DC=lab,DC=local'
- enabled = 'True'
- givenname = Blank Value
- name = 'Splunk Forwarder'
- objectclass = 'user'
- objectguid = 'e4e0a3bb-d9aa-4355-b9a8-85e5951a05c8'
- samaccountname = 'svc-splunk'
- sid = 'S-1-5-21-3939094207-3828562134-2660578157-1104'
- surname = Blank Value
- userprincipalname = 'svc-splunk@lab.local'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SYSTEM\CurrentControlSet\Services\NTDS\Parameters'
- check = 'name' must be equal (case insensitive) to 'LDAPServerIntegrity'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\NTDS\Parameters'
- name equals 'LDAPServerIntegrity'
- last_write_time equals '134342234660000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- check = 'name' must be equal (case insensitive) to 'RefusePasswordChange'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_NETWORK_LOGON_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Authenticated Users'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Enterprise Domain Controllers'
- userright equals 'SE_NETWORK_LOGON_NAME'
- trustee_name equals 'ENTERPRISE DOMAIN CONTROLLERS'
- trustee_sid equals 'S-1-5-9'
- userright equals 'SE_NETWORK_LOGON_NAME'
- trustee_name equals 'Pre-Windows 2000 Compatible Access'
- trustee_sid equals 'S-1-5-32-554'
- userright equals 'SE_NETWORK_LOGON_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- userright equals 'SE_NETWORK_LOGON_NAME'
- trustee_name equals 'Authenticated Users'
- trustee_sid equals 'S-1-5-11'
- userright equals 'SE_NETWORK_LOGON_NAME'
- trustee_name equals 'Everyone'
- trustee_sid equals 'S-1-1-0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_MACHINE_ACCOUNT_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_MACHINE_ACCOUNT_NAME'
- trustee_name equals 'Authenticated Users'
- trustee_sid equals 'S-1-5-11'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_REMOTE_INTERACTIVE_LOGON_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_REMOTE_INTERACTIVE_LOGON_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_DENY_NETWORK_LOGON_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Guests'
- userright equals 'SE_DENY_NETWORK_LOGON_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_DENY_BATCH_LOGON_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Guests'
- userright equals 'SE_DENY_BATCH_LOGON_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_DENY_SERVICE_LOGON_NAME'
- userright equals 'SE_DENY_SERVICE_LOGON_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_DENY_INTERACTIVE_LOGON_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Guests'
- userright equals 'SE_DENY_INTERACTIVE_LOGON_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'Software\Microsoft\Windows\CurrentVersion\Policies\System\KDC\Parameters'
- check = 'name' must be equal (case insensitive) to 'UseStrongNameMatches'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_DENY_REMOTE_INTERACTIVE_LOGON_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Guests'
- userright equals 'SE_DENY_REMOTE_INTERACTIVE_LOGON_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_ENABLE_DELEGATION_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_ENABLE_DELEGATION_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- true (All child tests must be true. (AND))
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$user = Get-ADUser krbtgt -properties passwordlastset; ([datetime]::Now - $user.PasswordLastSet).Days'
- check_existence = 'at_least_one_exists', check = all 'command' must be equal to '$user = Get-ADUser krbtgt -properties passwordlastset; ([datetime]::Now - $user.PasswordLastSet).Days'
- check_existence = 'at_least_one_exists', check = all 'stdout_line' must be less than or equal to '180'
- shell equals 'powershell'
- command equals '$user = Get-ADUser krbtgt -properties passwordlastset; ([datetime]::Now - $user.PasswordLastSet).Days'
- pattern equals ''
- exit_status equals ''
- stdout_line equals '5'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- Collect any available items.
- Collect any available items.
- false (All child tests must be true. (AND))
- Collect any available items.
- Collect any available items.
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- Collect any available items.
- Collect any available items.
- true (All child tests must be true. (AND))
- check = 'shell' must be equal to 'powershell'
- check = 'command' must be equal to '$( if((Get-CimInstance Win32_OperatingSystem).ProductType -eq 2){ Get-ADUser -Filter * -Properties SID | Where-Object {$_.SID -match "^S-1-5-[0-9-]+-501$"} | Select-Object Name,Enabled -First 1 | Format-List } else { Get-Localuser | Where-Object {$_.SID -match '^S-1-5-[0-9-]+-501$'} } ) | Format-List'
- check = 'pattern' must be equal to '.+'
- check_existence = 'at_least_one_exists', check = no 'stdout_line' can match the pattern 'Enabled\s+:\s+True'
- shell equals 'powershell'
- command equals '$( if((Get-CimInstance Win32_OperatingSystem).ProductType -eq 2){ Get-ADUser -Filter * -Properties SID | Where-Object {$_.SID -match "^S-1-5-[0-9-]+-501$"} | Select-Object Name,Enabled -First 1 | Format-List } else { Get-Localuser | Where-Object {$_.SID -match '^S-1-5-[0-9-]+-501$'} } ) | Format-List'
- pattern equals '.+'
- exit_status equals ''
- stdout_line equals 'Name : Guest'
- stdout_line equals 'Enabled : False'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SYSTEM\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal (case insensitive) to 'SCENoApplyLegacyAuditPolicy'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- check = 'name' must be equal to 'RequireSignOrSeal'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- name equals 'RequireSignOrSeal'
- last_write_time equals '134338002950000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'System\CurrentControlSet\Services\Netlogon\Parameters'
- check = 'name' must be equal to 'SealSecureChannel'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'System\CurrentControlSet\Services\Netlogon\Parameters'
- name equals 'SealSecureChannel'
- last_write_time equals '134338002950000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- check = 'name' must be equal (case insensitive) to 'SignSecureChannel'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- name equals 'SignSecureChannel'
- last_write_time equals '134338002950000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- check = 'name' must be equal to 'DisablePasswordChange'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- name equals 'DisablePasswordChange'
- last_write_time equals '134338002950000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- check = 'name' must be equal to 'RequireStrongKey'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\Netlogon\Parameters'
- name equals 'RequireStrongKey'
- last_write_time equals '134338002950000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'Software\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal (case insensitive) to 'InactivityTimeoutSecs'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be less than or equal to '900'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be greater than '0'
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeText'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern 'You are accessing a U.S. Government \(USG\) Information System \(IS\) that is provided for USG-authorized use only.'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeText'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeText'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern 'By using this IS \(which includes any device attached to this IS\), you consent to the following conditions:'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeText'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeText'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct \(PM\), law enforcement \(LE\), and counterintelligence \(CI\) investigations.'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeText'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeText'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '-At any time, the USG may inspect and seize data stored on this IS.'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeText'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeText'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeText'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeText'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '-This IS includes security measures \(e.g., authentication and access controls\) to protect USG interests--not for your personal benefit or privacy.'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeText'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeText'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeText'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon'
- check = 'name' must be equal to 'SCRemoveOption'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon'
- name equals 'SCRemoveOption'
- last_write_time equals '134342235100000000'
- type equals 'reg_sz'
- value equals '0'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'System\CurrentControlSet\Services\LanmanWorkstation\Parameters'
- check = 'name' must be equal to 'RequireSecuritySignature'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters'
- check = 'name' must be equal (case insensitive) to 'EnableSecuritySignature'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters'
- name equals 'EnableSecuritySignature'
- last_write_time equals '134338002050000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters'
- check = 'name' must be equal (case insensitive) to 'EnablePlainTextPassword'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters'
- name equals 'EnablePlainTextPassword'
- last_write_time equals '134338002050000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\LanManServer\Parameters'
- check = 'name' must be equal to 'RequireSecuritySignature'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\LanManServer\Parameters'
- name equals 'RequireSecuritySignature'
- last_write_time equals '134342234770000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\LanManServer\Parameters'
- check = 'name' must be equal to 'EnableSecuritySignature'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\LanManServer\Parameters'
- name equals 'EnableSecuritySignature'
- last_write_time equals '134342234770000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa'
- check = 'name' must be equal (case insensitive) to 'EveryoneIncludesAnonymous'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa'
- name equals 'EveryoneIncludesAnonymous'
- last_write_time equals '134342241690000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SYSTEM\CurrentControlSet\Control\LSA'
- check = 'name' must be equal (case insensitive) to 'UseMachineId'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\LSA\MSV1_0'
- check = 'name' must be equal to 'allownullsessionfallback'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\LSA\pku2u'
- check = 'name' must be equal to 'AllowOnlineID'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Kerberos\Parameters'
- check = 'name' must be equal to 'SupportedEncryptionTypes'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2147483640'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\LDAP'
- check = 'name' must be equal to 'LDAPClientIntegrity'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Services\LDAP'
- name equals 'LDAPClientIntegrity'
- last_write_time equals '134338002050000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0'
- check = 'name' must be equal to 'NTLMMinClientSec'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '537395200'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0'
- name equals 'NTLMMinClientSec'
- last_write_time equals '134338002050000000'
- type equals 'reg_dword'
- value equals '536870912'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0'
- check = 'name' must be equal to 'NTLMMinServerSec'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '537395200'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0'
- name equals 'NTLMMinServerSec'
- last_write_time equals '134338002050000000'
- type equals 'reg_dword'
- value equals '536870912'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SOFTWARE\Policies\Microsoft\Cryptography'
- check = 'name' must be equal (case insensitive) to 'ForceKeyProtection'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy'
- check = 'name' must be equal to 'Enabled'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy'
- name equals 'Enabled'
- last_write_time equals '134338002050000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'FilterAdministratorToken'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal (case insensitive) to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal (case insensitive) to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal (case insensitive) to 'EnableUIADesktopToggle'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'EnableUIADesktopToggle'
- last_write_time equals '134337591420000000'
- type equals 'reg_dword'
- value equals '0'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'ConsentPromptBehaviorAdmin'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'ConsentPromptBehaviorAdmin'
- last_write_time equals '134337591420000000'
- type equals 'reg_dword'
- value equals '5'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'ConsentPromptBehaviorUser'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'Software\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'ConsentPromptBehaviorUser'
- last_write_time equals '134337591420000000'
- type equals 'reg_dword'
- value equals '3'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'EnableInstallerDetection'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'EnableInstallerDetection'
- last_write_time equals '134337591420000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'EnableSecureUIAPaths'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'EnableSecureUIAPaths'
- last_write_time equals '134337591420000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'EnableLUA'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'Software\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'EnableLUA'
- last_write_time equals '134337591420000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'EnableVirtualization'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'Software\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'EnableVirtualization'
- last_write_time equals '134337591420000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- false (All child tests must be true. (AND))
- check = 'key' must be equal to 'Software\Microsoft\Windows\CurrentVersion\Policies\Attachments'
- check = 'name' must be equal to 'SaveZoneInformation'
- enabled equals 'false'
- days_since_modified is greater than '35'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- key does not exist
- name does not exist
- sid equals 'S-1-5-21-3939094207-3828562134-2660578157-500'
- username equals 'DC01\Administrator'
- account_type equals 'local'
- logged_on equals 'true'
- days_since_last_logon equals '0'
- user_has_signed_into_explorer equals 'true'
- enabled equals 'true'
- date_modified equals '134341819980000000'
- days_since_modified equals '1'
- filepath equals 'C:\Users\Administrator\ntuser.dat'
- value does not exist
- check = 'hive' must be equal to 'HKEY_CURRENT_USER'
- check = 'key' must be equal to 'Software\Microsoft\Windows\CurrentVersion\Policies\Attachments'
- check = 'name' must be equal to 'SaveZoneInformation'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_TRUSTED_CREDMAN_ACCESS_NAME'
- userright equals 'SE_TRUSTED_CREDMAN_ACCESS_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_INTERACTIVE_LOGON_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_INTERACTIVE_LOGON_NAME'
- trustee_name equals 'ENTERPRISE DOMAIN CONTROLLERS'
- trustee_sid equals 'S-1-5-9'
- userright equals 'SE_INTERACTIVE_LOGON_NAME'
- trustee_name equals 'Backup Operators'
- trustee_sid equals 'S-1-5-32-551'
- userright equals 'SE_INTERACTIVE_LOGON_NAME'
- trustee_name equals 'Print Operators'
- trustee_sid equals 'S-1-5-32-550'
- userright equals 'SE_INTERACTIVE_LOGON_NAME'
- trustee_name equals 'Server Operators'
- trustee_sid equals 'S-1-5-32-549'
- userright equals 'SE_INTERACTIVE_LOGON_NAME'
- trustee_name equals 'Account Operators'
- trustee_sid equals 'S-1-5-32-548'
- userright equals 'SE_INTERACTIVE_LOGON_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_BACKUP_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_BACKUP_NAME'
- trustee_name equals 'Backup Operators'
- trustee_sid equals 'S-1-5-32-551'
- userright equals 'SE_BACKUP_NAME'
- trustee_name equals 'Server Operators'
- trustee_sid equals 'S-1-5-32-549'
- userright equals 'SE_BACKUP_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_CREATE_PAGEFILE_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_CREATE_PAGEFILE_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_CREATE_GLOBAL_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'LOCAL SERVICE'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'NETWORK SERVICE'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'SERVICE'
- userright equals 'SE_CREATE_GLOBAL_NAME'
- trustee_name equals 'SERVICE'
- trustee_sid equals 'S-1-5-6'
- userright equals 'SE_CREATE_GLOBAL_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- userright equals 'SE_CREATE_GLOBAL_NAME'
- trustee_name equals 'NETWORK SERVICE'
- trustee_sid equals 'S-1-5-20'
- userright equals 'SE_CREATE_GLOBAL_NAME'
- trustee_name equals 'LOCAL SERVICE'
- trustee_sid equals 'S-1-5-19'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_CREATE_PERMANENT_NAME'
- userright equals 'SE_CREATE_PERMANENT_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- true (All child tests must be true. (AND))
- true (One or more child tests must be true. (OR))
- check = 'userright' must be equal to 'SE_CREATE_SYMBOLIC_LINK_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must match the pattern '^(?i)(NT VIRTUAL MACHINE\\)?Virtual Machines$'
- userright equals 'SE_CREATE_SYMBOLIC_LINK_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- check = 'namespace' must be equal to 'root\cimv2'
- check = 'wql' must be equal to 'SELECT ID FROM Win32_ServerFeature'
- namespace equals 'root\cimv2'
- wql equals 'SELECT ID FROM Win32_ServerFeature'
- collected 'result' result:
- id = '10'
- collected 'result' result:
- id = '13'
- collected 'result' result:
- id = '6'
- collected 'result' result:
- id = '481'
- collected 'result' result:
- id = '255'
- collected 'result' result:
- id = '69'
- collected 'result' result:
- id = '418'
- collected 'result' result:
- id = '466'
- collected 'result' result:
- id = '420'
- collected 'result' result:
- id = '425'
- collected 'result' result:
- id = '412'
- collected 'result' result:
- id = '417'
- collected 'result' result:
- id = '67'
- collected 'result' result:
- id = '330'
- collected 'result' result:
- id = '331'
- collected 'result' result:
- id = '329'
- collected 'result' result:
- id = '257'
- collected 'result' result:
- id = '299'
- collected 'result' result:
- id = '273'
- collected 'result' result:
- id = '256'
- collected 'result' result:
- id = '482'
- collected 'result' result:
- id = '1043'
- collected 'result' result:
- id = '1003'
- collected 'result' result:
- id = '2110'
- collected 'result' result:
- id = '38'
- collected 'result' result:
- id = '340'
- collected 'result' result:
- id = '338'
- check = 'userright' must be equal to 'SE_CREATE_SYMBOLIC_LINK_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_CREATE_SYMBOLIC_LINK_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_REMOTE_SHUTDOWN_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_REMOTE_SHUTDOWN_NAME'
- trustee_name equals 'Server Operators'
- trustee_sid equals 'S-1-5-32-549'
- userright equals 'SE_REMOTE_SHUTDOWN_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_AUDIT_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'LOCAL SERVICE'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'NETWORK SERVICE'
- userright equals 'SE_AUDIT_NAME'
- trustee_name equals 'RESTRICTED SERVICES\PrintSpoolerService'
- trustee_sid equals 'S-1-5-99-216390572-1995538116-3857911515-2404958512-2623887229'
- userright equals 'SE_AUDIT_NAME'
- trustee_name equals 'NETWORK SERVICE'
- trustee_sid equals 'S-1-5-20'
- userright equals 'SE_AUDIT_NAME'
- trustee_name equals 'LOCAL SERVICE'
- trustee_sid equals 'S-1-5-19'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_IMPERSONATE_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'LOCAL SERVICE'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'NETWORK SERVICE'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'SERVICE'
- userright equals 'SE_IMPERSONATE_NAME'
- trustee_name equals 'RESTRICTED SERVICES\PrintSpoolerService'
- trustee_sid equals 'S-1-5-99-216390572-1995538116-3857911515-2404958512-2623887229'
- userright equals 'SE_IMPERSONATE_NAME'
- trustee_name equals 'SERVICE'
- trustee_sid equals 'S-1-5-6'
- userright equals 'SE_IMPERSONATE_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- userright equals 'SE_IMPERSONATE_NAME'
- trustee_name equals 'NETWORK SERVICE'
- trustee_sid equals 'S-1-5-20'
- userright equals 'SE_IMPERSONATE_NAME'
- trustee_name equals 'LOCAL SERVICE'
- trustee_sid equals 'S-1-5-19'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_INC_BASE_PRIORITY_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_INC_BASE_PRIORITY_NAME'
- trustee_name equals 'Window Manager\Window Manager Group'
- trustee_sid equals 'S-1-5-90-0'
- userright equals 'SE_INC_BASE_PRIORITY_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_LOAD_DRIVER_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_LOAD_DRIVER_NAME'
- trustee_name equals 'Print Operators'
- trustee_sid equals 'S-1-5-32-550'
- userright equals 'SE_LOAD_DRIVER_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_LOCK_MEMORY_NAME'
- userright equals 'SE_LOCK_MEMORY_NAME'
- trustee_name does not exist
- trustee_sid does not exist
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_SECURITY_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_SECURITY_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_SYSTEM_ENVIRONMENT_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_SYSTEM_ENVIRONMENT_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_MANAGE_VOLUME_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_MANAGE_VOLUME_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_PROF_SINGLE_PROCESS_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_PROF_SINGLE_PROCESS_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_RESTORE_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_RESTORE_NAME'
- trustee_name equals 'Backup Operators'
- trustee_sid equals 'S-1-5-32-551'
- userright equals 'SE_RESTORE_NAME'
- trustee_name equals 'Server Operators'
- trustee_sid equals 'S-1-5-32-549'
- userright equals 'SE_RESTORE_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'userright' must be equal to 'SE_TAKE_OWNERSHIP_NAME'
- check_existence = 'at_least_one_exists', check = all 'trustee_name' must be equal (case insensitive) to 'Administrators'
- userright equals 'SE_TAKE_OWNERSHIP_NAME'
- trustee_name equals 'Administrators'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'handle_manipulation' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'handle_manipulation' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'registry' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'registry' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'registry' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'registry' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'sensitive_privilege_use' must be equal to 'AUDIT_SUCCESS'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'sensitive_privilege_use' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'sensitive_privilege_use' must be equal to 'AUDIT_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- Collect any available items.
- check_existence = 'at_least_one_exists', check = all 'sensitive_privilege_use' must be equal to 'AUDIT_SUCCESS_FAILURE'
- credential_validation equals 'AUDIT_SUCCESS'
- kerberos_authentication_service equals 'AUDIT_SUCCESS'
- kerberos_service_ticket_operations equals 'AUDIT_SUCCESS'
- kerberos_ticket_events equals 'AUDIT_SUCCESS'
- other_account_logon_events equals 'AUDIT_NONE'
- application_group_management equals 'AUDIT_NONE'
- computer_account_management equals 'AUDIT_SUCCESS'
- distribution_group_management equals 'AUDIT_NONE'
- other_account_management_events equals 'AUDIT_NONE'
- security_group_management equals 'AUDIT_SUCCESS'
- user_account_management equals 'AUDIT_SUCCESS'
- dpapi_activity equals 'AUDIT_NONE'
- process_creation equals 'AUDIT_NONE'
- process_termination equals 'AUDIT_NONE'
- rpc_events equals 'AUDIT_NONE'
- directory_service_access equals 'AUDIT_SUCCESS'
- directory_service_changes equals 'AUDIT_NONE'
- directory_service_replication equals 'AUDIT_NONE'
- detailed_directory_service_replication equals 'AUDIT_NONE'
- account_lockout equals 'AUDIT_SUCCESS'
- ipsec_extended_mode equals 'AUDIT_NONE'
- ipsec_main_mode equals 'AUDIT_NONE'
- ipsec_quick_mode equals 'AUDIT_NONE'
- logoff equals 'AUDIT_SUCCESS'
- logon equals 'AUDIT_SUCCESS_FAILURE'
- network_policy_server equals 'AUDIT_SUCCESS_FAILURE'
- other_logon_logoff_events equals 'AUDIT_NONE'
- special_logon equals 'AUDIT_SUCCESS'
- logon_claims equals 'AUDIT_NONE'
- application_generated equals 'AUDIT_NONE'
- certification_services equals 'AUDIT_NONE'
- detailed_file_share equals 'AUDIT_NONE'
- file_share equals 'AUDIT_NONE'
- file_system equals 'AUDIT_NONE'
- filtering_platform_connection equals 'AUDIT_NONE'
- filtering_platform_packet_drop equals 'AUDIT_NONE'
- handle_manipulation equals 'AUDIT_NONE'
- kernel_object equals 'AUDIT_NONE'
- other_object_access_events equals 'AUDIT_NONE'
- registry equals 'AUDIT_NONE'
- sam equals 'AUDIT_NONE'
- removable_storage equals 'AUDIT_NONE'
- central_access_policy_staging equals 'AUDIT_NONE'
- audit_policy_change equals 'AUDIT_SUCCESS'
- authentication_policy_change equals 'AUDIT_SUCCESS'
- authorization_policy_change equals 'AUDIT_NONE'
- filtering_platform_policy_change equals 'AUDIT_NONE'
- mpssvc_rule_level_policy_change equals 'AUDIT_NONE'
- other_policy_change_events equals 'AUDIT_NONE'
- non_sensitive_privilege_use equals 'AUDIT_NONE'
- other_privilege_use_events equals 'AUDIT_NONE'
- sensitive_privilege_use equals 'AUDIT_NONE'
- ipsec_driver equals 'AUDIT_NONE'
- other_system_events equals 'AUDIT_SUCCESS_FAILURE'
- security_state_change equals 'AUDIT_SUCCESS'
- security_system_extension equals 'AUDIT_NONE'
- system_integrity equals 'AUDIT_SUCCESS_FAILURE'
- group_membership equals 'AUDIT_NONE'
- pnp_activity equals 'AUDIT_NONE'
- user_device_claims equals 'AUDIT_NONE'
- audit_detailedtracking_tokenrightadjusted equals 'AUDIT_NONE'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'service_name' must be equal (case insensitive) to 'sshd'
- check_existence = 'at_least_one_exists', check = all 'current_state' must be equal to 'SERVICE_RUNNING'
- service_name equals 'sshd'
- display_name equals 'OpenSSH SSH Server'
- description equals 'SSH protocol based service to provide secure encrypted communications between two untrusted hosts over an insecure network.'
- service_type equals 'SERVICE_WIN32_OWN_PROCESS'
- start_type equals 'SERVICE_DEMAND_START'
- current_state equals 'SERVICE_STOPPED'
- start_name equals 'LocalSystem'
- path equals 'C:\WINDOWS\System32\OpenSSH\sshd.exe'
- pid equals '0'
- service_flag equals '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'filepath' must be equal (case insensitive) to 'C:\ProgramData\ssh\sshd_config'
- check = 'pattern' must match the pattern '(?i)^\s*(?!#)\s*banner\s+(?!(?i:none)(?:\s*(?:#.*)?)?$)([A-Za-z]:\\[^\s#]+)\s*(?:#.*)?$'
- check = 'instance' must be greater than or equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- behavior requirements:
- ignore_case = true
- check = 'filepath' must be equal to 'C:\ProgramData\ssh\sshd_config'
- check = 'pattern' must match the pattern '^\s*(?i)PubkeyAuthentication(?-i)[ \t]+([\w\"]+)[\s]*(?:|(?:#.*))?$'
- check = 'instance' must be greater than or equal to '1'
- check_existence = 'at_least_one_exists', check = all 'subexpression' must match the pattern '^(yes|"yes")$'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- behavior requirements:
- ignore_case = true
- check = 'filepath' must be equal to 'C:\ProgramData\ssh\sshd_config'
- check = 'pattern' must match the pattern '^\s*(?i)RekeyLimit(?-i)[ \t]+([\w\"]+[\s][\w\"]+)[^\S\n]*(?:|(?:#.*))?$'
- check = 'instance' must be greater than or equal to '1'
- check_existence = 'at_least_one_exists', check = all 'text' must match the pattern '(?i)[1-9][0-9]*[kmg]\s+[1-9][0-9]*[smhdw]'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- behavior requirements:
- ignore_case = true
- check = 'filepath' must be equal to 'C:\ProgramData\ssh\sshd_config'
- check = 'pattern' must match the pattern '^\s*(?i)ClientAliveCountMax(?-i)\s+"?(\d+)"?\s*(?:|(?:#.*))?$'
- check = 'instance' must be greater than or equal to '1'
- check_existence = 'at_least_one_exists', check = all 'subexpression' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- behavior requirements:
- ignore_case = true
- check = 'filepath' must be equal to 'C:\ProgramData\ssh\sshd_config'
- check = 'pattern' must match the pattern '^\s*(?i)ClientAliveInterval(?-i)[ \t]+([\w\"]+)[\s]*(?:|(?:#.*))?$'
- check = 'instance' must be greater than or equal to '1'
- check_existence = 'at_least_one_exists', check = all 'subexpression' must be greater than '0'
- check_existence = 'at_least_one_exists', check = all 'subexpression' must be less than or equal to '600'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'filepath' must be equal (case insensitive) to 'C:\ProgramData\ssh\sshd_config'
- check = 'trustee_sid' must be equal to 'S-1-5-18'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- check = 'filepath' must be equal (case insensitive) to 'C:\ProgramData\ssh\sshd_config'
- check = 'trustee_sid' must be equal to 'S-1-5-32-544'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- check = 'filepath' must be equal (case insensitive) to 'C:\ProgramData\ssh\sshd_config'
- check = 'trustee_sid' must be equal to 'S-1-5-11'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'false'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'false'
- check = 'filepath' must be equal (case insensitive) to 'C:\ProgramData\ssh\sshd_config'
- check = 'trustee_sid' must match the pattern '.*'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- trustee_sid equals 'S-1-5-11'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'path' must be equal (case insensitive) to 'C:\ProgramData\ssh\'
- check = 'filename' must match the pattern '^(?i)\S+_key$'
- check = 'trustee_sid' must be equal to 'S-1-5-18'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- check = 'path' must be equal (case insensitive) to 'C:\ProgramData\ssh\'
- check = 'filename' must match the pattern '^(?i)\S+_key$'
- check = 'trustee_sid' must be equal to 'S-1-5-32-544'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- check = 'path' must be equal (case insensitive) to 'C:\ProgramData\ssh\'
- check = 'filename' must match the pattern '^(?i)\S+_key$'
- check = 'trustee_sid' must match the pattern '.*'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- check = 'path' must be equal (case insensitive) to 'C:\ProgramData\ssh\'
- check = 'filename' must match the pattern '^(?i)\S+key\.pub$'
- check = 'trustee_sid' must be equal to 'S-1-5-18'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- check = 'path' must be equal (case insensitive) to 'C:\ProgramData\ssh\'
- check = 'filename' must match the pattern '^(?i)\S+key\.pub$'
- check = 'trustee_sid' must be equal to 'S-1-5-32-544'
- check_existence = 'at_least_one_exists', check = all 'standard_delete' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_read_control' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_dac' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_write_owner' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'standard_synchronize' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_read' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_write' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'generic_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_append_data' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_ea' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_execute' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_delete_child' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_read_attributes' must be equal to 'true'
- check_existence = 'at_least_one_exists', check = all 'file_write_attributes' must be equal to 'true'
- check = 'path' must be equal (case insensitive) to 'C:\ProgramData\ssh\'
- check = 'filename' must match the pattern '^(?i)\S+key\.pub$'
- check = 'trustee_sid' must match the pattern '.*'
- trustee_sid equals 'S-1-5-18'
- trustee_sid equals 'S-1-5-32-544'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- behavior requirements:
- ignore_case = true
- check = 'filepath' must be equal to 'C:\ProgramData\ssh\sshd_config'
- check = 'pattern' must match the pattern '^\s*(?i)GSSAPIAuthentication(?-i)[ \t]+([\w\"]+)[\s]*(?:|(?:#.*))?$'
- check = 'instance' must be greater than or equal to '1'
- check_existence = 'at_least_one_exists', check = all 'subexpression' must match the pattern '^(no|"no")$'
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
V-277986 - Windows Server 2025 passwords for the built-in Administrator account must be changed at least every 60 days.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277986r1182007_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | StandaloneServer_or_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-00-000020 | ||||||||||
| Identities: | CCI-004066 (NIST SP 800-53 Rev 5: IA-5 (1) (h)) | ||||||||||
| Description: | The longer a password is in use, the greater the opportunity for someone to gain unauthorized knowledge of the password. The built-in Administrator account is not generally used and its password may not be changed as frequently as necessary. Changing the password for the built-in Administrator account on a regular basis will limit its exposure. It is highly recommended to use Microsoft's Local Administrator Password Solution (LAPS). Domain-joined systems can configure this to occur more frequently. LAPS will change the password every 30 days by default. The authorizing official (AO) still has the overall authority to use another equivalent capability to accomplish the check. | ||||||||||
| Check Text: | If there are no enabled local Administrator accounts, this is not applicable. Review the password last set date for the enabled local Administrator account. On the stand-alone or domain-joined server: Open PowerShell. Enter "Get-LocalUser | Where-Object {$_.SID -like "*500"} | ForEach-Object ($_.PasswordLastSet){"$($_.Name) password is: $([int]((Get-Date) - $_.PasswordLastSet).TotalDays) days old"}". If the "PasswordLastSet" date is greater than "60" days old for the local Administrator account for administering the computer, this is a finding. Verify LAPS is configured and operational. If the system is a stand-alone member server, the LAPS portion of this requirement is not applicable. Navigate to Local Computer Policy >> Computer Configuration >> Administrative Templates >> System >> LAPS >> Password Settings >> Set to enabled. Password Complexity, large letters + small letters + numbers + special, Password Length 14, Password Age 60. If not configured as shown, this is a finding. Navigate to LAPS Operational logs >> Event Viewer >> Applications and Services Logs >> Microsoft >> Windows >> LAPS >> Operational. Verify LAPS policy process is completing. If it is not, this is a finding. | ||||||||||
| Fix Text: | Change the built-in Administrator account password at least every 60 days. It is highly recommended to use Microsoft's LAPS, which may be used on domain-joined member servers to accomplish this. The AO still has the overall authority to use another equivalent capability to accomplish the check. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-277989 - Windows Server 2025 manually managed application account passwords must be at least 15 characters in length.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277989r1181947_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-00-000050 | ||||||||||||||||||||||||||
| Identities: | CCI-004066 (NIST SP 800-53 Rev 5: IA-5 (1) (h)) | ||||||||||||||||||||||||||
| Description: | Application/service account passwords must be of sufficient length to prevent being easily cracked. Application/service accounts that are manually managed must have passwords at least 15 characters in length. | ||||||||||||||||||||||||||
| Check Text: | Determine if manually managed application/service accounts exist. If none exist, this is not applicable. Verify the organization has a policy to ensure passwords for manually managed application/service accounts are at least 15 characters in length. If such a policy does not exist or has not been implemented, this is a finding. | ||||||||||||||||||||||||||
| Fix Text: | Establish a policy that requires application/service account passwords that are manually managed to be at least 15 characters in length. Ensure the policy is enforced. | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-277993 - Windows Server 2025 systems must have a Trusted Platform Module (TPM) enabled and ready for use.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277993r1212171_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000090 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-004910 (NIST SP 800-53 Rev 5: SC-28 (3)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Credential Guard uses virtualization-based security to protect data that could be used in credential theft attacks if compromised. A number of system requirements must be met for Credential Guard to be configured and enabled properly. Without a TPM enabled and ready for use, Credential Guard keys are stored in a less secure method using software. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the system has a TPM and it is ready for use. Run "tpm.msc". Review the sections in the center pane. "Status" must indicate it has been configured with a message such as "The TPM is ready for use" or "The TPM is on and ownership has been taken". TPM Manufacturer Information - Specific Version = 2.0 If a TPM is not found or is not ready for use, this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Ensure systems have a TPM that is configured for use. (Version 2.0 supports Credential Guard.) The TPM must be enabled in the firmware. Run "tpm.msc" for configuration options in Windows. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-277998 - Windows Server 2025 permissions for the system drive root directory (usually C:\) must conform to minimum requirements.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277998r1180700_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000140 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002165 (NIST SP 800-53 Rev 4: AC-3 (4); NIST SP 800-53 Rev 5: AC-3 (4)) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let Everyone permissions apply to anonymous users" is set to "Disabled" (WN25-SO-000240). Satisfies: SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | The default permissions are adequate when the Security Option "Network access: Let Everyone permissions apply to anonymous users" is set to "Disabled" (WN25-SO-000240). Review the permissions for the system drive's root directory (usually C:\). Nonprivileged groups such as Users or Authenticated Users must not have greater than "Read & execute" permissions except where noted as defaults. Individual accounts must not be used to assign permissions. If permissions are not as restrictive as the default permissions listed below, this is a finding. Viewing in File Explorer: View the Properties of the system drive's root directory. Select the "Security" tab, and then click "Advanced". Default permissions: C:\ Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full control - This folder, subfolders, and files Administrators - Full control - This folder, subfolders, and files Users - Read & execute - This folder, subfolders, and files Users - Create folders/append data - This folder and subfolders Users - Create files/write data - Subfolders only CREATOR OWNER - Full Control - Subfolders and files only Alternately, use icacls: Open "command prompt (Admin)". Enter "icacls" followed by the directory: "icacls c:\" The following results must be displayed: c:\ NT AUTHORITY\SYSTEM:(OI)(CI)(F) BUILTIN\Administrators:(OI)(CI)(F) BUILTIN\Users:(OI)(CI)(RX) BUILTIN\Users:(CI)(AD) BUILTIN\Users:(CI)(IO)(WD) CREATOR OWNER:(OI)(CI)(IO)(F) Successfully processed 1 files; Failed processing 0 files | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Maintain the default permissions for the system drive's root directory and configure the Security Option "Network access: Let Everyone permissions apply to anonymous users" to "Disabled" (WN25-SO-000240). Default Permissions C:\ Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full control - This folder, subfolders, and files Administrators - Full control - This folder, subfolders, and files Users - Read & execute - This folder, subfolders, and files Users - Create folders/append data - This folder and subfolders Users - Create files/write data - Subfolders only CREATOR OWNER - Full Control - Subfolders and files only | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-277999 - Windows Server 2025 permissions for program file directories must conform to minimum requirements.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277999r1180703_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000150 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002165 (NIST SP 800-53 Rev 4: AC-3 (4); NIST SP 800-53 Rev 5: AC-3 (4)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let Everyone permissions apply to anonymous users" is set to "Disabled" (WN25-SO-000240). Satisfies: SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | The default permissions are adequate when the Security Option "Network access: Let Everyone permissions apply to anonymous users" is set to "Disabled" (WN25-SO-000240). Review the permissions for the program file directories (Program Files and Program Files [x86]). Nonprivileged groups such as Users or Authenticated Users must not have greater than "Read & execute" permissions. Individual accounts must not be used to assign permissions. If permissions are not as restrictive as the default permissions listed below, this is a finding. Viewing in File Explorer: For each folder, view the Properties. Select the "Security" tab, and then click "Advanced". Default permissions: \Program Files and \Program Files (x86) Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files Alternately, use icacls: Open a Command prompt (admin). Enter "icacls" followed by the directory: 'icacls "c:\program files"' 'icacls "c:\program files (x86)"' The following results must be displayed for each when entered: c:\program files (c:\program files (x86)) NT SERVICE\TrustedInstaller:(F) NT SERVICE\TrustedInstaller:(CI)(IO)(F) NT AUTHORITY\SYSTEM:(M) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M) BUILTIN\Administrators:(OI)(CI)(IO)(F) BUILTIN\Users:(RX) BUILTIN\Users:(OI)(CI)(IO)(GR,GE) CREATOR OWNER:(OI)(CI)(IO)(F) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) Successfully processed 1 files; Failed processing 0 files | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Maintain the default permissions for the program file directories and configure the Security Option "Network access: Let Everyone permissions apply to anonymous users" to "Disabled" (WN25-SO-000240). Default permissions: \Program Files and \Program Files (x86) Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders, and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278000 - Windows Server 2025 permissions for the Windows installation directory must conform to minimum requirements.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278000r1182252_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000160 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002165 (NIST SP 800-53 Rev 4: AC-3 (4); NIST SP 800-53 Rev 5: AC-3 (4)) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Changing the system's file and directory permissions allows the possibility of unauthorized and anonymous modification to the operating system and installed applications. The default permissions are adequate when the Security Option "Network access: Let Everyone permissions apply to anonymous users" is set to "Disabled" (WN25-SO-000240). Satisfies: SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | The default permissions are adequate when the Security Option "Network access: Let Everyone permissions apply to anonymous users" is set to "Disabled" (WN25-SO-000240). Review the permissions for the Windows installation directory (usually C:\Windows). Nonprivileged groups such as Users or Authenticated Users must not have greater than "Read & execute" permissions. Individual accounts must not be used to assign permissions. If permissions are not as restrictive as the default permissions listed below, this is a finding: Viewing in File Explorer: For each folder, view the Properties. Select the "Security" tab, and then click "Advanced". Default permissions: \Windows Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders, and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files Alternately, use icacls: Open a Command prompt (admin). Enter "icacls" followed by the directory: "icacls c:\windows" The following results must be displayed for each when entered: c:\windows NT SERVICE\TrustedInstaller:(F) NT SERVICE\TrustedInstaller:(CI)(IO)(F) NT AUTHORITY\SYSTEM:(M) NT AUTHORITY\SYSTEM:(OI)(CI)(IO)(F) BUILTIN\Administrators:(M) BUILTIN\Administrators:(OI)(CI)(IO)(F) BUILTIN\Users:(RX) BUILTIN\Users:(OI)(CI)(IO)(GR,GE) CREATOR OWNER:(OI)(CI)(IO)(F) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(RX) APPLICATION PACKAGE AUTHORITY\ALL RESTRICTED APPLICATION PACKAGES:(OI)(CI)(IO)(GR,GE) Successfully processed 1 files; Failed processing 0 files | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Maintain the default file ACLs and configure the Security Option "Network access: Let Everyone permissions apply to anonymous users" to "Disabled" (WN25-SO-000240). Default permissions: Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to TrustedInstaller - Full control - This folder and subfolders SYSTEM - Modify - This folder only SYSTEM - Full control - Subfolders and files only Administrators - Modify - This folder only Administrators - Full control - Subfolders and files only Users - Read & execute - This folder, subfolders, and files CREATOR OWNER - Full control - Subfolders and files only ALL APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files ALL RESTRICTED APPLICATION PACKAGES - Read & execute - This folder, subfolders, and files | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278001 - Windows Server 2025 default permissions for the HKEY_LOCAL_MACHINE registry hive must be maintained.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278001r1211143_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000170 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | The registry is integral to the function, security, and stability of the Windows system. Changing the system's registry permissions allows the possibility of unauthorized and anonymous modification to the operating system. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Review the registry permissions for the keys of the HKEY_LOCAL_MACHINE hive noted below. If any nonprivileged groups such as Everyone, Users, or Authenticated Users have greater than Read permission, this is a finding. If permissions are not as restrictive as the default permissions listed below, this is a finding. Note: “Authenticated Users” is default on Domain Controllers, and “Users” is default on member servers and stand-alone servers. Revise expected response based on system context. Run "Regedit". Right-click on the registry areas noted below. Select "Permissions" and then click "Advanced". HKEY_LOCAL_MACHINE\SECURITY Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full Control - This key and subkeys Administrators - Special - This key and subkeys HKEY_LOCAL_MACHINE\SOFTWARE Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys HKEY_LOCAL_MACHINE\SYSTEM Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Authenticated Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and Subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys Server Operators - Read - This Key and subkeys (Domain controllers only) Other examples under the noted keys may also be sampled. In some instances, nonprivileged groups have greater than Read permission. Microsoft has given Read permission to the SOFTWARE and SYSTEM registry keys in Windows Server 2025 to the following SID. This is not a finding. S-1-15-3-1024-1065365936-1281604716-3511738428-1654721687-432734479-3232135806-4053264122-3456934681 If the defaults have not been changed, this is not a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Maintain the default permissions for the HKEY_LOCAL_MACHINE registry hive. The default permissions of the higher-level keys are noted below: Note: “Authenticated Users” is default on Domain Controllers, and “Users” is default on member servers and stand-alone servers. Revise expected response based on system context. HKEY_LOCAL_MACHINE\SECURITY Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to SYSTEM - Full Control - This key and subkeys Administrators - Special - This key and subkeys HKEY_LOCAL_MACHINE\SOFTWARE Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys HKEY_LOCAL_MACHINE\SYSTEM Type - "Allow" for all Inherited from - "None" for all Principal - Access - Applies to Authenticated Users - Read - This key and subkeys Administrators - Full Control - This key and subkeys SYSTEM - Full Control - This key and subkeys CREATOR OWNER - Full Control - This key and subkeys ALL APPLICATION PACKAGES - Read - This key and subkeys Server Operators - Read - This Key and subkeys (Domain controllers only) Microsoft has given Read permission to the SOFTWARE and SYSTEM registry keys in Windows Server 2025 to the following SID: S-1-15-3-1024-1065365936-1281604716-3511738428-1654721687-432734479-3232135806-4053264122-3456934681 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278004 - Windows Server 2025 accounts must require passwords.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278004r1182256_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000200 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000764 (NIST SP 800-53: IA-2; NIST SP 800-53A: IA-2.1; NIST SP 800-53 Rev 4: IA-2; NIST SP 800-53 Rev 5: IA-2) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | The lack of password protection enables anyone to gain access to the information system, which opens a backdoor opportunity for intruders to compromise the system as well as other resources. Accounts on a system must require passwords. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Review the password required status for enabled user accounts. Open PowerShell. Domain Controllers: Enter "Get-Aduser -Filter * -Properties Passwordnotrequired |FT Name, Passwordnotrequired, Enabled". Exclude disabled accounts (e.g., DefaultAccount, Guest) and Trusted Domain Objects (TDOs). If "Passwordnotrequired" is "True" or blank for any enabled user account, this is a finding. Member servers and stand-alone or nondomain-joined systems: Enter 'Get-CimInstance -Class Win32_Useraccount -Filter "PasswordRequired=False and LocalAccount=True" | FT Name, PasswordRequired, Disabled, LocalAccount'. Exclude disabled accounts (e.g., DefaultAccount, Guest). If any enabled user accounts are returned with a "PasswordRequired" status of "False", this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure all enabled accounts to require passwords. The password required flag can be set by entering the following on a command line: "Net user [username] /passwordreq:yes", substituting [username] with the name of the user account. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278005 - Windows Server 2025 passwords must be configured to expire.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278005r1182259_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000210 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-004066 (NIST SP 800-53 Rev 5: IA-5 (1) (h)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Passwords that do not expire or are reused increase the exposure of a password with greater probability of being discovered or cracked. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Review the password never expires status for enabled user accounts. Open PowerShell. Domain Controllers: Enter "Search-ADAccount -PasswordNeverExpires -UsersOnly | FT Name, PasswordNeverExpires, Enabled". Exclude application accounts, disabled accounts (e.g., DefaultAccount, Guest), and the krbtgt account. If any enabled user accounts are returned with a "PasswordNeverExpires" status of "True", this is a finding. Member servers and stand-alone or nondomain-joined systems: Enter 'Get-CimInstance -Class Win32_Useraccount -Filter "PasswordExpires=False and LocalAccount=True" | FT Name, PasswordExpires, Disabled, LocalAccount'. Exclude application accounts and disabled accounts (e.g., DefaultAccount, Guest). If any enabled user accounts are returned with a "PasswordExpires" status of "False", this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure all enabled user account passwords to expire. Uncheck "Password never expires" for all enabled user accounts in Active Directory Users and Computers for domain accounts and Users in Computer Management for member servers and stand-alone or nondomain-joined systems. Document any exceptions with the information system security officer (ISSO). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278008 - Windows Server 2025 must have software certificate installation files removed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278008r1211146_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-00-000240 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||
| Description: | Use of software certificates and their accompanying installation files for end users to access resources is less secure than the use of hardware-based certificates. | ||||||||||||||||||||||||||||||||
| Check Text: | Search all drives for *.p12 and *.pfx files. If any files with these extensions exist, this is a finding. This does not apply to server-based applications that have a requirement for .p12 or .pfx certificate files. Some applications create files with extensions of .p12 or .pfx that are not certificate installation files. Removal of noncertificate installation files from systems is not required. These must be documented with the information system security officer (ISSO). | ||||||||||||||||||||||||||||||||
| Fix Text: | Remove any certificate installation files (*.p12 and *.pfx) found on a system. Note: This does not apply to server-based applications that have a requirement for .p12 or .pfx certificate files. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278015 - Windows Server 2025 must not have the Fax Server role installed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278015r1180751_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-00-000320 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system. | ||||||||||||||||||||||||
| Check Text: | Open PowerShell. Enter "Get-WindowsFeature | Where Name -eq Fax". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. | ||||||||||||||||||||||||
| Fix Text: | Uninstall the "Fax Server" role. Start Server Manager. Select the server with the role. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Fax Server" on the "Roles" page. Click "Next" and "Remove" as prompted. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278016 - Windows Server 2025 must not have the Microsoft FTP service installed unless required by the organization.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278016r1181795_rule | ||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||
| Version: | WN25-00-000330 | ||||||||||||||||||
| Identities: | CCI-000382 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (iii); NIST SP 800-53 Rev 4: CM-7 b; NIST SP 800-53 Rev 5: CM-7 b) | ||||||||||||||||||
| Description: | Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption. | ||||||||||||||||||
| Check Text: | If the server has the role of an FTP server, this is not applicable. Open PowerShell. Enter "Get-WindowsFeature | Where Name -eq Web-Ftp-Service". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. If the system has the role of an FTP server, this must be documented with the information system security officer (ISSO). | ||||||||||||||||||
| Fix Text: | Uninstall the "FTP Server" role. Start Server Manager. Select the server with the role. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "FTP Server" under "Web Server (IIS)" on the "Roles" page. Click "Next" and "Remove" as prompted. | ||||||||||||||||||
| Severity: | medium | ||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||
| Reference: |
| ||||||||||||||||||
| Definitions: |
| ||||||||||||||||||
| Tests: |
|
V-278018 - Windows Server 2025 must not have Bluetooth enabled unless required by the organization.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278018r1180760_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-00-000333 | ||||||||||||||||||||||||
| Identities: | CCI-000382 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (iii); NIST SP 800-53 Rev 4: CM-7 b; NIST SP 800-53 Rev 5: CM-7 b) | ||||||||||||||||||||||||
| Description: | Unnecessary applications and/or services such as Bluetooth could allow an attacker to connect with intentions to take over or disrupt the system. | ||||||||||||||||||||||||
| Check Text: | In the Windows search bar, type "Services". In the Services "Name" column look for the "Bluetooth Support Service". If this is set to "automatic", this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Validate the site documentation to ensure the approval of use for Wi-Fi server connections. If the connection has not been approved, type "Services" in the Windows search bar. In the Services "Name " column, look for the "Bluetooth Support Service" and set this to "Disabled". Any Bluetooth devices listed or in use must be documented and approved by the information system security officer (ISSO) or authorizing official (AO). | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278019 - Windows Server 2025 must not have the Peer Name Resolution Protocol installed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278019r1180763_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-00-000340 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system. | ||||||||||||||||||||||||
| Check Text: | Open PowerShell. Enter "Get-WindowsFeature | Where Name -eq PNRP". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. | ||||||||||||||||||||||||
| Fix Text: | Uninstall the "Peer Name Resolution Protocol" feature. Start Server Manager. Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Peer Name Resolution Protocol" on the "Features" page. Click "Next" and "Remove" as prompted. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278020 - Windows Server 2025 must not have Simple TCP/IP Services installed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278020r1180766_rule | ||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||
| Version: | WN25-00-000350 | ||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||
| Description: | Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system. | ||||||||||||||||||
| Check Text: | Open PowerShell. Enter "Get-WindowsFeature | Where Name -eq Simple-TCPIP". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. | ||||||||||||||||||
| Fix Text: | Uninstall the "Simple TCP/IP Services" feature. Start Server Manager. Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Simple TCP/IP Services" on the "Features" page. Click "Next" and "Remove" as prompted. | ||||||||||||||||||
| Severity: | medium | ||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||
| Reference: |
| ||||||||||||||||||
| Definitions: |
| ||||||||||||||||||
| Tests: |
|
V-278021 - Windows Server 2025 must not have the Telnet Client installed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278021r1180769_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-00-000360 | ||||||||||||||||||||||||
| Identities: | CCI-000382 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (iii); NIST SP 800-53 Rev 4: CM-7 b; NIST SP 800-53 Rev 5: CM-7 b) | ||||||||||||||||||||||||
| Description: | Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system. | ||||||||||||||||||||||||
| Check Text: | Open PowerShell. Enter "Get-WindowsFeature | Where Name -eq Telnet-Client". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. | ||||||||||||||||||||||||
| Fix Text: | Uninstall the "Telnet Client" feature. Start Server Manager. Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Telnet Client" on the "Features" page. Click "Next" and "Remove" as prompted. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278022 - Windows Server 2025 must not have the TFTP Client installed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278022r1180772_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-00-000370 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Unnecessary services increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption or may provide unauthorized access to the system. | ||||||||||||||||||||||||
| Check Text: | Open PowerShell. Enter "Get-WindowsFeature | Where Name -eq TFTP-Client". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. | ||||||||||||||||||||||||
| Fix Text: | Uninstall the "TFTP Client" feature. Start Server Manager. Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "TFTP Client" on the "Features" page. Click "Next" and "Remove" as prompted. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278023 - Windows Server 2025 must not have the Server Message Block (SMB) v1 protocol installed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278023r1182034_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000380 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks and is not FIPS compliant. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Different methods are available to disable SMBv1 on Windows Server 2025. This is the preferred method, however if WN25-00-000390 and WN25-00-000400 are configured, this is not applicable. Open Windows PowerShell with elevated privileges (run as administrator). Enter "Get-WindowsFeature -Name FS-SMB1". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Uninstall the SMBv1 protocol. Open Windows PowerShell with elevated privileges (run as administrator). Enter "Uninstall-WindowsFeature -Name FS-SMB1 -Restart". (Omit the Restart parameter if an immediate restart of the system cannot be done.) Alternately: Start Server Manager. Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "SMB 1.0/CIFS File Sharing Support" on the "Features" page. Click "Next" and "Remove" as prompted. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278024 - Windows Server 2025 must have the Server Message Block (SMB) v1 protocol disabled on the SMB server.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278024r1182036_rule | ||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000390 | ||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||||||||||||||||||||||||
| Description: | SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks, as well as not being FIPS compliant. | ||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Different methods are available to disable SMBv1 on Windows Server 2025, if WN25-00-000380 is configured, this is not applicable. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\ Value Name: SMB1 Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> Configure SMBv1 Server to "Disabled". Restart the system for the change to take effect. This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively. | ||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278025 - Windows Server 2025 must have the Server Message Block (SMB) v1 protocol disabled on the SMB client.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278025r1182038_rule | ||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-00-000400 | ||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||||||||||||||||||||||||
| Description: | SMBv1 is a legacy protocol that uses the MD5 algorithm as part of SMB. MD5 is known to be vulnerable to a number of attacks such as collision and preimage attacks as well as not being FIPS compliant. | ||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Different methods are available to disable SMBv1 on Windows Server 2025, if WN25-00-000380 is configured, this is not applicable. If the following registry value is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\mrxsmb10\ Value Name: Start Type: REG_DWORD Value: 0x00000004 (4) | ||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> Configure SMBv1 client driver to "Enabled" with "Disable driver (recommended)" selected for "Configure MrxSmb10 driver". Restart the system for the changes to take effect. This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and "SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively. | ||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278026 - Windows Server 2025 must not have Windows PowerShell 2.0 installed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278026r1180784_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-00-000410 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Windows PowerShell 5.x added advanced logging features that can provide additional detail when malware has been run on a system. Disabling the Windows PowerShell 2.0 mitigates against a downgrade attack that evades the Windows PowerShell 5.x script block logging feature. | ||||||||||||||||||||||||
| Check Text: | Open PowerShell. Enter "Get-WindowsFeature | Where Name -eq PowerShell-v2". If "Installed State" is "Installed", this is a finding. An Installed State of "Available" or "Removed" is not a finding. | ||||||||||||||||||||||||
| Fix Text: | Uninstall the Windows PowerShell 2.0 Engine. Start Server Manager. Select the server with the feature. Scroll down to "ROLES AND FEATURES" in the right pane. Select "Remove Roles and Features" from the drop-down "TASKS" list. Select the appropriate server on the "Server Selection" page and click "Next". Deselect "Windows PowerShell 2.0 Engine" under "Windows PowerShell" on the "Features" page. Click "Next" and "Remove" as prompted. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278027 - Windows Server 2025 FTP servers must be configured to prevent anonymous logons.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278027r1181803_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | FTP | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-00-000420 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | The FTP service allows remote users to access shared files and directories. Allowing anonymous FTP connections makes user auditing difficult. Using accounts that have administrator privileges to log on to FTP risks that the userid and password will be captured on the network and give administrator access to an unauthorized user. | ||||||||||
| Check Text: | If FTP is not installed on the system, this is not applicable. Open Internet Information Services (IIS) Manager. Select the server. Double-click "FTP Authentication". If the "Anonymous Authentication" status is "Enabled", this is a finding. | ||||||||||
| Fix Text: | Configure the FTP service to prevent anonymous logons. Open IIS Manager. Select the server. Double-click "FTP Authentication". Select "Anonymous Authentication". Select "Disabled" under "Actions". | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278028 - Windows Server 2025 FTP servers must be configured to prevent access to the system drive.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278028r1182265_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | FTP | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-00-000430 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | The FTP service allows remote users to access shared files and directories that could provide access to system resources and compromise the system, especially if the user can gain access to the root directory of the boot drive. | ||||||||||
| Check Text: | If FTP is not installed on the system, this is not applicable. Open Internet Information Services (IIS) Manager. Select "Sites" under the server name. For any sites with a Binding that lists FTP, right-click the site and select "Explore". If the site is not defined to a specific folder for shared FTP resources, this is a finding. If the site includes any system areas such as root of the drive, Program Files, or Windows directories, this is a finding. | ||||||||||
| Fix Text: | Configure the FTP sites to allow access only to specific FTP shared resources. Do not allow access to other areas of the system. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278030 - Windows Server 2025 must have orphaned security identifiers (SIDs) removed from user rights.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278030r1182043_rule | ||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||
| Version: | WN25-00-000450 | ||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||
| Description: | Accounts or groups given rights on a system may show up as unresolved SIDs for various reasons including deletion of the accounts or groups. If the account or group objects are reanimated, there is a potential they may still have rights no longer intended. Valid domain accounts or groups may also show up as unresolved SIDs if a connection to the domain cannot be established. | ||||||||||||||||||
| Check Text: | Review the effective User Rights setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. Review each User Right listed for any unresolved SIDs to determine whether they are valid, such as due to being temporarily disconnected from the domain. (Unresolved SIDs have the format that begins with "*S-1-".) If any unresolved SIDs exist and are not for currently valid accounts or groups, this is a finding. For server core installations, run the following command: Secedit /export /areas USER_RIGHTS /cfg c:\path\UserRights.txt The results in the file identify user right assignments by SID instead of group name. Review the SIDs to determine which are unidentified. A list of typical SIDs\Groups is below; search Microsoft for articles on well-known SIDs for others. If any unresolved SIDs exist and are not for currently valid accounts or groups, this is a finding. SID - Group S-1-5-11 - Authenticated Users S-1-5-113 - Local account S-1-5-114 - Local account and member of Administrators group S-1-5-19 - Local Service S-1-5-20 - Network Service S-1-5-32-544 - Administrators S-1-5-32-546 - Guests S-1-5-6 - Service S-1-5-9 - Enterprise Domain Controllers S-1-5-domain-512 - Domain Admins S-1-5-root domain-519 - Enterprise Admins S-1-5-80-3139157870-2983391045-3678747466-658725712-1809340420 - NT Service\WdiServiceHost | ||||||||||||||||||
| Fix Text: | Remove any unresolved SIDs found in User Rights assignments that are determined to not be for currently valid accounts or groups by removing the accounts or groups from the appropriate group policy. | ||||||||||||||||||
| Severity: | medium | ||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||
| Reference: |
| ||||||||||||||||||
| Definitions: |
| ||||||||||||||||||
| Tests: |
|
V-278031 - Windows Server 2025 systems must have Unified Extensible Firmware Interface (UEFI) firmware and be configured to run in UEFI mode, not Legacy BIOS.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278031r1182046_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-00-000460 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | UEFI provides additional security features in comparison to legacy BIOS firmware, including Secure Boot. UEFI is required to support additional security features in Windows, including Virtualization Based Security and Credential Guard. Systems with UEFI that are operating in "Legacy BIOS" mode will not support these security features. | ||||||||||||||||||||||||
| Check Text: | Devices that have UEFI firmware must run in UEFI mode. Verify the system firmware is configured to run in UEFI mode, not Legacy BIOS. Run "System Information". Under "System Summary", if "BIOS Mode" does not display "UEFI", this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure UEFI firmware to run in UEFI mode, not Legacy BIOS mode. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278032 - Windows Server 2025 must have Secure Boot enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278032r1180802_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-00-000470 | ||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||
| Description: | Secure Boot is a standard that ensures systems boot only to a trusted operating system. Secure Boot is required to support additional security features in Windows, including Virtualization Based Security and Credential Guard. If Secure Boot is turned off, these security features will not function. | ||||||||||||||||||||||||||
| Check Text: | Devices that have UEFI firmware must have Secure Boot enabled. Run "System Information". Under "System Summary", if "Secure Boot State" does not display "On", this is a finding. On server core installations, run the following PowerShell command: Confirm-SecureBootUEFI If a value of "True" is not returned, this is a finding. | ||||||||||||||||||||||||||
| Fix Text: | Enable Secure Boot in the system firmware. | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278033 - Windows Server 2025 account lockout duration must be configured to 15 minutes or greater.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278033r1180805_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AC-000010 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002238 (NIST SP 800-53 Rev 4: AC-7 b; NIST SP 800-53 Rev 5: AC-7 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | When enabled, the account lockout feature prevents brute-force password attacks on the system. This parameter specifies the period of time that an account will remain locked after the specified number of failed logon attempts. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Account lockout duration" is less than "15" minutes (excluding "0"), this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "LockoutDuration" is less than "15" (excluding "0") in the file, this is a finding. Configuring this to "0", requiring an administrator to unlock the account, is more restrictive and is not a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. Set "Account lockout duration" to "15" minutes or greater. A value of "0" is also acceptable, requiring an administrator to unlock the account. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278034 - Windows Server 2025 must have the number of allowed bad logon attempts configured to three or less.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278034r1180808_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AC-000020 | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000044 (NIST SP 800-53: AC-7 a; NIST SP 800-53A: AC-7.1 (ii); NIST SP 800-53 Rev 4: AC-7 a; NIST SP 800-53 Rev 5: AC-7 a) | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | The account lockout feature, when enabled, prevents brute-force password attacks on the system. The higher this value is, the less effective the account lockout feature will be in protecting the local system. The number of bad logon attempts must be reasonably small to minimize the possibility of a successful password attack while allowing for honest errors made during normal user logon. | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Account lockout threshold" is "0" or more than "3" attempts, this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "LockoutBadCount" equals "0" or is greater than "3" in the file, this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. Set "Account lockout threshold" to "3" or fewer invalid logon attempts (excluding "0", which is unacceptable). | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278035 - Windows Server 2025 must have the period of time before the bad logon counter is reset configured to 15 minutes or greater.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278035r1180811_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AC-000030 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000044 (NIST SP 800-53: AC-7 a; NIST SP 800-53A: AC-7.1 (ii); NIST SP 800-53 Rev 4: AC-7 a; NIST SP 800-53 Rev 5: AC-7 a) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | When enabled, the account lockout feature prevents brute-force password attacks on the system. This parameter specifies the period of time that must pass after failed logon attempts before the counter is reset to "0". The smaller this value is, the less effective the account lockout feature will be in protecting the local system. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. If the "Reset account lockout counter after" value is less than "15" minutes, this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "ResetLockoutCount" is less than "15" in the file, this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Account Lockout Policy. Set "Reset account lockout counter after" to at least "15" minutes. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278036 - Windows Server 2025 password history must be configured to 24 passwords remembered.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278036r1256715_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-AC-000040 | ||||||||||||||||||||||||
| Identities: | CCI-004061 (NIST SP 800-53 Rev 5: IA-5 (1) (b)) | ||||||||||||||||||||||||
| Description: | A system is more vulnerable to unauthorized access when system users recycle the same password several times without being required to change to a unique password on a regularly scheduled basis. This enables users to effectively negate the purpose of mandating periodic password changes. The default value is "24" for Windows domain systems. DoW has decided this is the appropriate value for all Windows systems. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for "Enforce password history" is less than "24" passwords remembered, this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "PasswordHistorySize" is less than "24" in the file, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. Set "Enforce password history" to "24" passwords remembered. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278037 - Windows Server 2025 maximum password age must be configured to 60 days or less.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278037r1180817_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-AC-000050 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-004066 (NIST SP 800-53 Rev 5: IA-5 (1) (h)) | ||||||||||||||||||||||||||||||||
| Description: | The longer a password is in use, the greater the opportunity for someone to gain unauthorized knowledge of the passwords. Scheduled changing of passwords hinders the ability of unauthorized system users to crack passwords and gain access to a system. | ||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for the "Maximum password age" is greater than "60" days, this is a finding. If the value is set to "0" (never expires), this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "MaximumPasswordAge" is greater than "60" or equal to "0" in the file, this is a finding. | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. Set "Maximum password age" to "60" days or less (excluding "0", which is unacceptable). | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278038 - Windows Server 2025 minimum password age must be configured to at least one day.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278038r1180820_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-AC-000060 | ||||||||||||||||||||||||
| Identities: | CCI-004066 (NIST SP 800-53 Rev 5: IA-5 (1) (h)) | ||||||||||||||||||||||||
| Description: | Permitting passwords to be changed in immediate succession within the same day allows users to cycle passwords through their history database. This enables users to effectively negate the purpose of mandating periodic password changes. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for the "Minimum password age" is set to "0" days ("Password can be changed immediately"), this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "MinimumPasswordAge" equals "0" in the file, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. Set "Minimum password age" to at least "1" day. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278039 - Windows Server 2025 must have the built-in Windows password complexity policy enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278039r1180823_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-AC-000080 | ||||||||||||||||||||||||
| Identities: | CCI-004066 (NIST SP 800-53 Rev 5: IA-5 (1) (h)) | ||||||||||||||||||||||||
| Description: | The use of complex passwords increases their strength against attack. The built-in Windows password complexity policy requires passwords to contain at least three of the four types of characters (numbers, uppercase and lowercase letters, and special characters) and prevents the inclusion of user names or parts of user names. Satisfies: SRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038, SRG-OS-000071-GPOS-00039, SRG-OS-000266-GPOS-00101 | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. If the value for "Password must meet complexity requirements" is not set to "Enabled", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "PasswordComplexity" equals "0" in the file, this is a finding. Note: If an external password filter is in use that enforces all four character types and requires this setting to be set to "Disabled", this would not be considered a finding. If this setting does not affect the use of an external password filter, it must be enabled for fallback purposes. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Password Policy. Set the value for "Password must meet complexity requirements" to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278043 - Windows Server 2025 permissions for the Application event log must prevent access by nonprivileged accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278043r1180835_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000030 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000162 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000163 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000164 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The Application event log may be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Navigate to the Application event log file. The default location is the "%SystemRoot%\System32\winevt\Logs" folder. However, the logs may have been moved to another folder. If the permissions for the "Application.evtx" file are not as restrictive as the default permissions listed below, this is a finding: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the permissions on the Application event log file (Application.evtx) to prevent access by nonprivileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog". | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278044 - Windows Server 2025 permissions for the Security event log must prevent access by nonprivileged accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278044r1182051_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000040 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000162 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000163 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000164 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The Security event log may disclose sensitive information or be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Navigate to the Security event log file. The default location is the "%SystemRoot%\System32\winevt\Logs" folder. However, the logs may have been moved to another folder. If the permissions for the "Security.evtx" file are not as restrictive as the default permissions listed below, this is a finding: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the permissions on the Security event log file (Security.evtx) to prevent access by nonprivileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog". | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278045 - Windows Server 2025 permissions for the System event log must prevent access by nonprivileged accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278045r1180841_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000050 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000162 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000163 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000164 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. The System event log may be susceptible to tampering if proper permissions are not applied. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Navigate to the System event log file. The default location is the "%SystemRoot%\System32\winevt\Logs" folder. However, the logs may have been moved to another folder. If the permissions for the "System.evtx" file are not as restrictive as the default permissions listed below, this is a finding: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the permissions on the System event log file (System.evtx) to prevent access by nonprivileged accounts. The default permissions listed below satisfy this requirement: Eventlog - Full Control SYSTEM - Full Control Administrators - Full Control The default location is the "%SystemRoot%\System32\winevt\Logs" folder. If the location of the logs has been changed, when adding Eventlog to the permissions, it must be entered as "NT Service\Eventlog". | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278046 - Windows Server 2025 Event Viewer must be protected from unauthorized modification and deletion.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278046r1211151_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000060 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-001494 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-001495 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) | ||||||||||||||||||||||||||||||||||
| Description: | Protecting audit information also includes identifying and protecting the tools used to view and manipulate log data. Therefore, protecting audit tools is necessary to prevent unauthorized operation on audit information. Operating systems providing tools to interface with audit information will leverage user permissions and roles identifying the user accessing the tools and the corresponding user rights to make access decisions regarding the modification or deletion of audit tools. Satisfies: SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099 | ||||||||||||||||||||||||||||||||||
| Check Text: | This is not applicable for Windows Core Edition. Navigate to "%SystemRoot%\System32". View the permissions on "Eventvwr.exe". If any groups or accounts other than TrustedInstaller have "Full control" or "Modify" permissions, this is a finding. The default permissions below satisfy this requirement: TrustedInstaller - Full Control Administrators, SYSTEM, Users, ALL APPLICATION PACKAGES, ALL RESTRICTED APPLICATION PACKAGES - Read & Execute | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the permissions on the "Eventvwr.exe" file to prevent modification by any groups or accounts other than TrustedInstaller. The default permissions listed below satisfy this requirement: TrustedInstaller - Full Control Administrators, SYSTEM, Users, ALL APPLICATION PACKAGES, ALL RESTRICTED APPLICATION PACKAGES - Read & Execute The default location is the "%SystemRoot%\System32" folder. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278047 - Windows Server 2025 must be configured to audit Account Logon - Credential Validation successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278047r1180847_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000070 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential Validation records events related to validation tests on credentials for a user account logon. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Account Logon >> Credential Validation - Success | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Logon >> Audit Credential Validation with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278048 - Windows Server 2025 must be configured to audit Account Logon - Credential Validation failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278048r1180850_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000080 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential Validation records events related to validation tests on credentials for a user account logon. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Account Logon >> Credential Validation - Failure | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Logon >> Audit Credential Validation with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278049 - Windows Server 2025 must be configured to audit Account Management - Other Account Management Events successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278049r1180853_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000090 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Other Account Management Events records events such as the access of a password hash or the Password Policy Checking API being called. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210 | ||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Account Management >> Other Account Management Events - Success | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit Other Account Management Events with "Success" selected. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278050 - Windows Server 2025 must be configured to audit Account Management - Security Group Management successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278050r1180856_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000100 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000018 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-001403 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-001404 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-001405 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-002130 (NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) | ||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security Group Management records events such as creating, deleting, or changing security groups, including changes in group members. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221 | ||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Account Management >> Security Group Management - Success | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit Security Group Management with "Success" selected. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278051 - Windows Server 2025 must be configured to audit Account Management - User Account Management successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278051r1180859_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000110 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000018 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-001403 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-001404 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-001405 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-002130 (NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. User Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling user accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Account Management >> User Account Management - Success | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit User Account Management with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278052 - Windows Server 2025 must be configured to audit Account Management - User Account Management failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278052r1180862_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000120 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000018 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-001403 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-001404 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-001405 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-002130 (NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. User Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling user accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Account Management >> User Account Management - Failure | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit User Account Management with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278053 - Windows Server 2025 must be configured to audit Detailed Tracking - Plug and Play Events successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278053r1180865_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000130 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Plug and Play activity records events related to the successful connection of external devices. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Detailed Tracking >> Plug and Play Events - Success | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> Audit PNP Activity with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278054 - Windows Server 2025 must be configured to audit Detailed Tracking - Process Creation successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278054r1180868_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000140 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Process Creation records events related to the creation of a process and the source. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Detailed Tracking >> Process Creation - Success | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Detailed Tracking >> Audit Process Creation with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278055 - Windows Server 2025 must be configured to audit Logon/Logoff - Account Lockout successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278055r1180871_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000150 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-001404 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Account Lockout events can be used to identify potentially malicious logon attempts. Satisfies: SRG-OS-000240-GPOS-00090, SRG-OS-000470-GPOS-00214 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Account Lockout - Success | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Account Lockout with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278056 - Windows Server 2025 must be configured to audit Logon/Logoff - Account Lockout failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278056r1180874_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000160 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-001404 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Account Lockout events can be used to identify potentially malicious logon attempts. Satisfies: SRG-OS-000240-GPOS-00090, SRG-OS-000470-GPOS-00214 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Account Lockout - Failure | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Account Lockout with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278057 - Windows Server 2025 must be configured to audit Logon/Logoff - Group Membership successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278057r1180877_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000170 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Group Membership records information related to the group membership of a user's logon token. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Group Membership - Success | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Group Membership with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278058 - Windows Server 2025 must be configured to audit logoff successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278058r1180880_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000180 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logoff records user logoffs. If this is an interactive logoff, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Logoff - Success | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Logoff with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278059 - Windows Server 2025 must be configured to audit logon successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278059r1180883_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000190 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000067 (NIST SP 800-53: AC-17 (1); NIST SP 800-53A: AC-17 (1).1; NIST SP 800-53 Rev 4: AC-17 (1); NIST SP 800-53 Rev 5: AC-17 (1)) CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logon records user logons. If this is an interactive logon, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed. Satisfies: SRG-OS-000032-GPOS-00013, SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Logon - Success | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Logon with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278060 - Windows Server 2025 must be configured to audit logon failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278060r1180886_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000200 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000067 (NIST SP 800-53: AC-17 (1); NIST SP 800-53A: AC-17 (1).1; NIST SP 800-53 Rev 4: AC-17 (1); NIST SP 800-53 Rev 5: AC-17 (1)) CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Logon records user logons. If this is an interactive logon, it is recorded on the local system. If it is to a network share, it is recorded on the system accessed. Satisfies: SRG-OS-000032-GPOS-00013, SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Logon - Failure | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Logon with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278061 - Windows Server 2025 must be configured to audit Logon/Logoff - Special Logon successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278061r1180889_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000210 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Special Logon records special logons that have administrative privileges and can be used to elevate processes. Satisfies: SRG-OS-000470-GPOS-00214, SRG-OS-000472-GPOS-00217, SRG-OS-000473-GPOS-00218, SRG-OS-000475-GPOS-00220 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Logon/Logoff >> Special Logon - Success | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Logon/Logoff >> Audit Special Logon with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278062 - Windows Server 2025 must be configured to audit Object Access - Other Object Access Events successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278062r1180892_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000220 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Auditing for other object access records events related to the management of task scheduler jobs and COM+ objects. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Object Access >> Other Object Access Events - Success | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Other Object Access Events with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278063 - Windows Server 2025 must be configured to audit Object Access - Other Object Access Events failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278063r1180895_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000230 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Auditing for other object access records events related to the management of task scheduler jobs and COM+ objects. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Object Access >> Other Object Access Events - Failure | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Other Object Access Events with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278064 - Windows Server 2025 must be configured to audit Object Access - Removable Storage successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278064r1180898_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000240 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Removable Storage auditing under Object Access records events related to access attempts on file system objects on removable storage devices. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Object Access >> Removable Storage - Success Virtual machines or systems that use network attached storage may generate excessive audit events for secondary virtual drives or the network attached storage when this setting is enabled. This may be set to Not Configured in such cases and would not be a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Removable Storage with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278065 - Windows Server 2025 must be configured to audit Object Access - Removable Storage failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278065r1180901_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000250 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Removable Storage auditing under Object Access records events related to access attempts on file system objects on removable storage devices. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Object Access >> Removable Storage - Failure Virtual machines or systems that use network attached storage may generate excessive audit events for secondary virtual drives or the network attached storage when this setting is enabled. This may be set to Not Configured in such cases and would not be a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Removable Storage with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278066 - Windows Server 2025 must be configured to audit Policy Change - Audit Policy Change successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278066r1180904_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000260 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Policy Change records events related to changes in audit policy. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Policy Change >> Audit Audit Policy Change - Success | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> Audit Audit Policy Change with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278067 - Windows Server 2025 must be configured to audit Policy Change - Audit Policy Change failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278067r1180907_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000270 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Policy Change records events related to changes in audit policy. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Policy Change >> Audit Audit Policy Change - Failure | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> Audit Audit Policy Change with "Failure" selected. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278068 - Windows Server 2025 must be configured to audit Policy Change - Authentication Policy Change successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278068r1180910_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000280 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Authentication Policy Change records events related to changes in authentication policy, including Kerberos policy and Trust changes. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210 | ||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Policy Change >> Authentication Policy Change - Success | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> Audit Authentication Policy Change with "Success" selected. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278069 - Windows Server 2025 must be configured to audit Policy Change - Authorization Policy Change successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278069r1180913_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000281 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Authorization Policy Change records events related to changes in user rights, such as "Create a token object". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Policy Change >> Authorization Policy Change - Success | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Policy Change >> Audit Authorization Policy Change with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278070 - Windows Server 2025 must be configured to audit Privilege Use - Sensitive Privilege Use successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278070r1180916_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000300 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) CCI-004188 (NIST SP 800-53 Rev 5: MA-3 (5)) | ||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Sensitive Privilege Use records events related to use of sensitive privileges, such as "Act as part of the operating system" or "Debug programs". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210, SRG-OS-000755-GPOS-00220 | ||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Privilege Use >> Sensitive Privilege Use - Success | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> Audit Sensitive Privilege Use with "Success" selected. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278071 - Windows Server 2025 must be configured to audit Privilege Use - Sensitive Privilege Use failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278071r1180919_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000310 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) CCI-004188 (NIST SP 800-53 Rev 5: MA-3 (5)) | ||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Sensitive Privilege Use records events related to use of sensitive privileges, such as "Act as part of the operating system" or "Debug programs". Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000064-GPOS-00033, SRG-OS-000462-GPOS-00206, SRG-OS-000466-GPOS-00210, SRG-OS-000755-GPOS-00220 | ||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Privilege Use >> Sensitive Privilege Use - Failure | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> Audit Sensitive Privilege Use with "Failure" selected. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278072 - Windows Server 2025 must be configured to audit System - IPsec Driver successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278072r1180922_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000320 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. IPsec Driver records events related to the IPsec Driver, such as dropped packets. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: System >> IPsec Driver - Success | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit IPsec Driver with "Success" selected. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278073 - Windows Server 2025 must be configured to audit System - IPsec Driver failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278073r1180925_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000330 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. IPsec Driver records events related to the IPsec Driver, such as dropped packets. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: System >> IPsec Driver - Failure | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit IPsec Driver with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278074 - Windows Server 2025 must be configured to audit System - Other System Events successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278074r1180928_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000340 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Other System Events records information related to cryptographic key operations and the Windows Firewall service. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: System >> Other System Events - Success | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit Other System Events with "Success" selected. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278075 - Windows Server 2025 must be configured to audit System - Other System Events failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278075r1180931_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000350 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Other System Events records information related to cryptographic key operations and the Windows Firewall service. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: System >> Other System Events - Failure | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit Other System Events with "Failure" selected. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278076 - Windows Server 2025 must be configured to audit System - Security State Change successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278076r1180934_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000360 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security State Change records events related to changes in the security state, such as startup and shutdown of the system. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: System >> Security State Change - Success | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit Security State Change with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278077 - Windows Server 2025 must be configured to audit System - Security System Extension successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278077r1180937_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000370 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Security System Extension records events related to extension code being loaded by the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: System >> Security System Extension - Success | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit Security System Extension with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278078 - Windows Server 2025 must be configured to audit System - System Integrity successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278078r1180940_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000380 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. System Integrity records events related to violations of integrity to the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222 | ||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: System >> System Integrity - Success | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit System Integrity with "Success" selected. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278079 - Windows Server 2025 must be configured to audit System - System Integrity failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278079r1180943_rule | ||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000390 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. System Integrity records events related to violations of integrity to the security subsystem. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000471-GPOS-00215, SRG-OS-000471-GPOS-00216, SRG-OS-000477-GPOS-00222 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: System >> System Integrity - Failure | ||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> System >> Audit System Integrity with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278080 - Windows Server 2025 must prevent the display of slide shows on the lock screen.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278080r1180946_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000010 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Slide shows displayed on the lock screen could display sensitive information to unauthorized personnel. Turning off this feature will limit access to the information to a logged-on user. | ||||||||||||||||||||||||
| Check Text: | Verify the registry value below: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Personalization\ Value Name: NoLockScreenSlideshow Value Type: REG_DWORD Value: 0x00000001 (1) If the registry value does not exist or is not configured as specified, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Control Panel >> Personalization >> Prevent enabling lock screen slide show to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278086 - Windows Server 2025 insecure logons to an SMB server must be disabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278086r1180964_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000070 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Insecure guest logons allow unauthenticated access to shared folders. Shared resources on a system must require authentication to establish proper access. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\LanmanWorkstation\ Value Name: AllowInsecureGuestAuth Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Lanman Workstation >> Enable insecure guest logons to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278087 - Windows Server 2025 hardened Universal Naming Convention (UNC) paths must be defined to require mutual authentication and integrity for at least the \\*\SYSVOL and \\*\NETLOGON shares.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278087r1182272_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-CC-000080 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Additional security requirements are applied to UNC paths specified in hardened UNC paths before allowing access to them. This aids in preventing tampering with or spoofing of connections to these paths. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | This requirement is applicable to domain-joined systems. For stand-alone or nondomain-joined systems, this is not applicable. If the following registry values do not exist or are not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\NetworkProvider\HardenedPaths\ Value Name: \\*\NETLOGON Value Type: REG_SZ Value: RequireMutualAuthentication=1, RequireIntegrity=1 Value Name: \\*\SYSVOL Value Type: REG_SZ Value: RequireMutualAuthentication=1, RequireIntegrity=1 Additional entries would not be a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Network >> Network Provider >> Hardened UNC Paths" to "Enabled" with at least the following configured in "Hardened UNC Paths" (click "Show" to display): Value Name: \\*\SYSVOL Value: RequireMutualAuthentication=1, RequireIntegrity=1 Value Name: \\*\NETLOGON Value: RequireMutualAuthentication=1, RequireIntegrity=1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278088 - Windows Server 2025 command line data must be included in process creation events.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278088r1180970_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000090 | ||||||||||||||||||||||||
| Identities: | CCI-000135 (NIST SP 800-53: AU-3 (1); NIST SP 800-53A: AU-3 (1).1 (ii); NIST SP 800-53 Rev 4: AU-3 (1); NIST SP 800-53 Rev 5: AU-3 (1)) | ||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Enabling "Include command line data for process creation events" will record the command line information with the process creation events in the log. This can provide additional detail when malware has run on a system. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Audit\ Value Name: ProcessCreationIncludeCmdLine_Enabled Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Audit Process Creation >> Include command line in process creation events to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278089 - Windows Server 2025 must be configured to enable Remote host allows delegation of nonexportable credentials.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278089r1180973_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000100 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | An exportable version of credentials is provided to remote hosts when using credential delegation, which exposes them to theft on the remote host. Restricted Admin mode or Remote Credential Guard allow delegation of nonexportable credentials providing additional protection of the credentials. Enabling this configures the host to support Restricted Admin mode or Remote Credential Guard. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\CredentialsDelegation\ Value Name: AllowProtectedCreds Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Credentials Delegation >> Remote host allows delegation of nonexportable credentials to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278090 - Windows Server 2025 virtualization-based security must be enabled with the platform security level configured to Secure Boot or Secure Boot with DMA Protection.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278090r1182274_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | MemberServer_or_DomainController | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-CC-000110 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Virtualization Based Security (VBS) provides the platform for the additional security features Credential Guard and virtualization-based protection of code integrity. Secure Boot is the minimum security level, with DMA protection providing additional memory protection. DMA Protection requires a CPU that supports input/output memory management unit (IOMMU). | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | For stand-alone or nondomain-joined systems, this is not applicable. Open PowerShell with elevated privileges (run as administrator). Enter the following: "Get-CimInstance -ClassName Win32_DeviceGuard -Namespace root\Microsoft\Windows\DeviceGuard" If "RequiredSecurityProperties" does not include a value of "2" indicating "Secure Boot" (e.g., "{1, 2}"), this is a finding. If "Secure Boot and DMA Protection" is configured, "3" will also be displayed in the results (e.g., "{1, 2, 3}"). If "VirtualizationBasedSecurityStatus" is not a value of "2" indicating "Running", this is a finding. Alternately: Run "System Information". Under "System Summary", verify the following: If "Device Guard Virtualization based security" does not display "Running", this is a finding. If "Device Guard Required Security Properties" does not display "Base Virtualization Support, Secure Boot", this is a finding. If "Secure Boot and DMA Protection" is configured, "DMA Protection" will also be displayed (e.g., "Base Virtualization Support, Secure Boot, DMA Protection"). The policy settings referenced in the Fix section will configure the following registry values; however, due to hardware requirements, the registry values alone do not ensure proper function. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\DeviceGuard\ Value Name: EnableVirtualizationBasedSecurity Value Type: REG_DWORD Value: 0x00000001 (1) Value Name: RequirePlatformSecurityFeatures Value Type: REG_DWORD Value: 0x00000001 (1) (Secure Boot only) or 0x00000003 (3) (Secure Boot and DMA Protection) A Microsoft TechNet article on Credential Guard, including system requirement details, can be found at the following link: https://technet.microsoft.com/itpro/windows/keep-secure/credential-guard | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Device Guard >> Turn On Virtualization Based Security to "Enabled" with Platform Security Level set to "Secure Boot" or "Secure Boot and DMA Protection" selected. A Microsoft TechNet article on Credential Guard, including system requirement details, can be found at the following link: https://technet.microsoft.com/itpro/windows/keep-secure/credential-guard | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278091 - Windows Server 2025 Early Launch Antimalware, Boot-Start Driver Initialization Policy must prevent boot drivers identified as bad.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278091r1182244_rule | ||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||
| Version: | WN25-CC-000130 | ||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||
| Description: | Compromised boot drivers can introduce malware prior to protection mechanisms that load after initialization. The Early Launch Antimalware driver can limit allowed drivers based on classifications determined by the malware protection application. At a minimum, drivers determined to be bad must not be allowed. | ||||||||||||||||||||||||||||||||||||
| Check Text: | The default behavior is for Early Launch Antimalware - Boot-Start Driver Initialization policy to enforce "Good, unknown and bad but critical" (preventing "bad"). If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0x00000007 (7)", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Policies\EarlyLaunch\ Value Name: DriverLoadPolicy Value Type: REG_DWORD Value: 0x00000001 (1), 0x00000003 (3), or 0x00000008 (8) (or if the Value Name does not exist) Possible values for this setting are: 8 - Good only 1 - Good and unknown 3 - Good, unknown and bad but critical 7 - All (which includes "bad" and would be a finding) | ||||||||||||||||||||||||||||||||||||
| Fix Text: | The default behavior is for Early Launch Antimalware - Boot-Start Driver Initialization policy to enforce "Good, unknown and bad but critical" (preventing "bad"). To correct this, or if a more secure setting is desired, configure the policy value for Computer Configuration >> Administrative Templates >> System >> Early Launch Antimalware >> Boot-Start Driver Initialization Policy to "Not Configured" or "Enabled" with any option other than "All" selected. | ||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278092 - Windows Server 2025 group policy objects must be reprocessed even if they have not changed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278092r1182059_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-CC-000140 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | Registry entries for group policy settings can potentially be changed from the required configuration. This could occur as part of troubleshooting or by a malicious process on a compromised system. Enabling this setting and then selecting the "Process even if the Group Policy objects have not changed" option ensures the policies will be reprocessed even if none have been changed. This way, any unauthorized changes are forced to match the domain-based group policy settings again. | ||||||||||
| Check Text: | This is not applicable for Domain Controllers. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Group Policy\{35378EAC-683F-11D2-A89A-00C04FBBCFA2}\ Value Name: NoGPOListChanges Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Group Policy >> Configure registry policy processing to "Enabled" with the option "Process even if the Group Policy objects have not changed" selected. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278093 - Windows Server 2025 downloading print driver packages over HTTP must be turned off.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278093r1180985_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000150 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting prevents the computer from downloading print driver packages over HTTP. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Printers\ Value Name: DisableWebPnPDownload Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> Turn off downloading of print drivers over HTTP to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278094 - Windows Server 2025 printing over HTTP must be turned off.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278094r1180988_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000160 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting prevents the client computer from printing over HTTP, which allows the computer to print to printers on the intranet as well as the internet. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Printers\ Value Name: DisableHTTPPrinting Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Internet Communication Management >> Internet Communication settings >> Turn off printing over HTTP to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278095 - Windows Server 2025 network selection user interface (UI) must not be displayed on the logon screen.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278095r1180991_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000170 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Enabling interaction with the network selection UI allows users to change connections to available networks without signing in to Windows. | ||||||||||||||||||||||||
| Check Text: | Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: DontDisplayNetworkSelectionUI Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> Do not display network selection UI to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278096 - Windows Server 2025 users must be prompted to authenticate when the system wakes from sleep (on battery).
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278096r1180994_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000180 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | A system that does not require authentication when resuming from sleep may provide access to unauthorized users. Authentication must always be required when accessing a system. This setting ensures users are prompted for a password when the system wakes from sleep (on battery). | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51\ Value Name: DCSettingIndex Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> Require a password when a computer wakes (on battery) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278097 - Windows Server 2025 users must be prompted to authenticate when the system wakes from sleep (plugged in).
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278097r1180997_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000190 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | A system that does not require authentication when resuming from sleep may provide access to unauthorized users. Authentication must always be required when accessing a system. This setting ensures users are prompted for a password when the system wakes from sleep (plugged in). | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51\ Value Name: ACSettingIndex Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Power Management >> Sleep Settings >> Require a password when a computer wakes (plugged in) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278102 - Windows Server 2025 administrator accounts must not be enumerated during elevation.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278102r1181012_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000240 | ||||||||||||||||||||||||
| Identities: | CCI-001084 (NIST SP 800-53: SC-3; NIST SP 800-53A: SC-3.1 (ii); NIST SP 800-53 Rev 4: SC-3; NIST SP 800-53 Rev 5: SC-3) | ||||||||||||||||||||||||
| Description: | Enumeration of administrator accounts when elevating can provide part of the logon information to an unauthorized user. This setting configures the system to always require users to type in a username and password to elevate a running application. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\CredUI\ Value Name: EnumerateAdministrators Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Credential User Interface >> Enumerate administrator accounts on elevation to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278103 - Windows Server 2025 Telemetry must be configured to limit diagnostic data sent to Microsoft.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278103r1181982_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||
| Version: | WN25-CC-000250 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||
| Description: | Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Limiting this capability will prevent potentially sensitive information from being sent outside the enterprise. The "send required diagnostic data" option for Allow Diagnostic Data configures the lowest amount of data, effectively none outside of the Malicious Software Removal Tool (MSRT), Defender, and Diagnostic Data client settings. "Optional Diagnostic Data" sends basic diagnostic and usage data and may be required to support some Microsoft services. | ||||||||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\DataCollection\ Value Name: AllowTelemetry Type: REG_DWORD Value0x00000000 (0), 0x00000001 (1) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Data Collection and Preview Build >> Allow Diagnostic Data to "Enabled" with "Send required diagnostic data" selected or "Diagnostic data off (not recommended)". | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278105 - Windows Server 2025 Application event log size must be configured to 32768 KB or greater.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278105r1181812_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000270 | ||||||||||||||||||||||||
| Identities: | CCI-001849 (NIST SP 800-53 Rev 4: AU-4; NIST SP 800-53 Rev 5: AU-4) | ||||||||||||||||||||||||
| Description: | Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel. | ||||||||||||||||||||||||
| Check Text: | If the system is configured to write events directly to an audit server, this is not applicable. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\Application\ Value Name: MaxSize Type: REG_DWORD Value: 0x00008000 (32768) (or greater) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Application >> Specify the maximum log file size (KB) to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278106 - Windows Server 2025 Security event log size must be configured to a value that holds at least one week of audit records.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278106r1211154_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000280 | ||||||||||||||||||||||||
| Identities: | CCI-001849 (NIST SP 800-53 Rev 4: AU-4; NIST SP 800-53 Rev 5: AU-4) | ||||||||||||||||||||||||
| Description: | Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel. System administrators (SAs) must monitor the volume of security event audit records and increase the registry value for the log size as needed. | ||||||||||||||||||||||||
| Check Text: | If the system is configured to write events directly to an audit server, this is not applicable. The registry configuration setting below must be set (at least) to a value equal to the size needed to contain one week's worth of audit records in the security event log. The value used below is an example that assumes a typical week’s log size of 5GB. If a registry value does not exist or is not configured to hold one week of records, this is a finding: Note: The following registry entry is an example; the value must equal at least one week's worth of records in the environment. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\Security\ Value Name: MaxSize Type: REG_DWORD Value: 0x4E2000 (5120000) (or greater) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> Security >> Specify the maximum log file size (KB) to "Enabled" with a "Maximum Log Size (KB)" of a value that will contain one week of audit records or greater. Note: The registry entry value in the Check is an example; the value must equal at least one week's worth of records in the environment. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278107 - Windows Server 2025 System event log size must be configured to 32768 KB or greater.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278107r1181816_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000290 | ||||||||||||||||||||||||
| Identities: | CCI-001849 (NIST SP 800-53 Rev 4: AU-4; NIST SP 800-53 Rev 5: AU-4) | ||||||||||||||||||||||||
| Description: | Inadequate log size will cause the log to fill up quickly. This may prevent audit events from being recorded properly and require frequent attention by administrative personnel. | ||||||||||||||||||||||||
| Check Text: | If the system is configured to write events directly to an audit server, this is not applicable. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\EventLog\System\ Value Name: MaxSize Type: REG_DWORD Value: 0x00008000 (32768) (or greater) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Event Log Service >> System >> Specify the maximum log file size (KB) to "Enabled" with a "Maximum Log Size (KB)" of "32768" or greater. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278108 - Windows Server 2025 Microsoft Defender antivirus SmartScreen must be enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278108r1181818_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000300 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Microsoft Defender antivirus SmartScreen helps protect systems from programs downloaded from the internet that may be malicious. Enabling SmartScreen can block potentially malicious programs or warn users. | ||||||||||||||||||||||||
| Check Text: | This is applicable to unclassified systems; for other systems, this is not applicable. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: EnableSmartScreen Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Configure Windows Defender SmartScreen to "Enabled" with either option "Warn" or "Warn and prevent bypass" selected. Windows Server 2025 includes duplicate policies for this setting. It can also be configured under Computer Configuration >> Administrative Templates >> Windows Components >> Windows Defender SmartScreen >> Explorer. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278109 - Windows Server 2025 Explorer Data Execution Prevention must be enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278109r1182061_rule | ||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||
| Version: | WN25-CC-000310 | ||||||||||||||||||||||
| Identities: | CCI-002824 (NIST SP 800-53 Rev 4: SI-16; NIST SP 800-53 Rev 5: SI-16) | ||||||||||||||||||||||
| Description: | Data Execution Prevention provides additional protection by performing checks on memory to help prevent malicious code from running. This setting will prevent Data Execution Prevention from being turned off for File Explorer. | ||||||||||||||||||||||
| Check Text: | The default behavior is for Data Execution Prevention to be turned on for File Explorer. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Explorer\ Value Name: NoDataExecutionPrevention Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist) | ||||||||||||||||||||||
| Fix Text: | The default behavior is for data execution prevention to be turned on for File Explorer. To correct this, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Turn off Data Execution Prevention for Explorer to "Not Configured" or "Disabled". | ||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||
| Tests: |
|
V-278111 - Windows Server 2025 File Explorer shell protocol must run in protected mode.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278111r1182065_rule | ||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||
| Version: | WN25-CC-000330 | ||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||
| Description: | The shell protocol will limit the set of folders that applications can open when run in protected mode. Restricting files an application can open to a limited set of folders increases the security of Windows. | ||||||||||||||||||||||
| Check Text: | The default behavior is for shell protected mode to be turned on for File Explorer. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Value Name: PreXPSP2ShellProtocolBehavior Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist) | ||||||||||||||||||||||
| Fix Text: | The default behavior is for shell protected mode to be turned on for File Explorer. To correct this, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Turn off shell protocol protected mode to "Not Configured" or "Disabled". | ||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||
| Tests: |
|
V-278112 - Windows Server 2025 must not save passwords in the Remote Desktop Client.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278112r1181042_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000340 | ||||||||||||||||||||||||
| Identities: | CCI-004895 (NIST SP 800-53 Rev 5: SC-11 b) | ||||||||||||||||||||||||
| Description: | Saving passwords in the Remote Desktop Client could allow an unauthorized user to establish a remote desktop session to another system. The system must be configured to prevent users from saving passwords in the Remote Desktop Client. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: DisablePasswordSaving Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Connection Client >> Do not allow passwords to be saved to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278113 - Windows Server 2025 Remote Desktop Services must prevent drive redirection.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278113r1181045_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000350 | ||||||||||||||||||||||||
| Identities: | CCI-001090 (NIST SP 800-53: SC-4; NIST SP 800-53A: SC-4.1; NIST SP 800-53 Rev 4: SC-4; NIST SP 800-53 Rev 5: SC-4) | ||||||||||||||||||||||||
| Description: | Preventing users from sharing the local drives on their client computers with Remote Session Hosts that they access helps reduce possible exposure of sensitive data. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fDisableCdm Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Device and Resource Redirection >> Do not allow drive redirection to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278114 - Windows Server 2025 Remote Desktop Services must always prompt a client for passwords upon connection.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278114r1181048_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000360 | ||||||||||||||||||||||||
| Identities: | CCI-004895 (NIST SP 800-53 Rev 5: SC-11 b) | ||||||||||||||||||||||||
| Description: | This setting controls the ability of users to supply passwords automatically as part of their remote desktop connection. Disabling this setting would allow anyone to use the stored credentials in a connection item to connect to the terminal server. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fPromptForPassword Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> Always prompt for password upon connection to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278115 - Windows Server 2025 Remote Desktop Services must require secure Remote Procedure Call (RPC) communications.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278115r1181051_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000370 | ||||||||||||||||||||||||
| Identities: | CCI-000068 (NIST SP 800-53: AC-17 (2); NIST SP 800-53A: AC-17 (2).1; NIST SP 800-53 Rev 4: AC-17 (2); NIST SP 800-53 Rev 5: AC-17 (2)) CCI-001453 (NIST SP 800-53: AC-17 (2); NIST SP 800-53A: AC-17 (2).1; NIST SP 800-53 Rev 4: AC-17 (2); NIST SP 800-53 Rev 5: AC-17 (2)) | ||||||||||||||||||||||||
| Description: | Allowing unsecure RPC communication exposes the system to man-in-the-middle attacks and data disclosure attacks. A man-in-the-middle attack occurs when an intruder captures packets between a client and server and modifies them before allowing the packets to be exchanged. Usually, the attacker will modify the information in the packets in an attempt to cause either the client or server to reveal sensitive information. Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000250-GPOS-00093 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: fEncryptRPCTraffic Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> Require secure RPC communication to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278116 - Windows Server 2025 Remote Desktop Services must be configured with the client connection encryption set to High Level.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278116r1181054_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000380 | ||||||||||||||||||||||||
| Identities: | CCI-000068 (NIST SP 800-53: AC-17 (2); NIST SP 800-53A: AC-17 (2).1; NIST SP 800-53 Rev 4: AC-17 (2); NIST SP 800-53 Rev 5: AC-17 (2)) CCI-001453 (NIST SP 800-53: AC-17 (2); NIST SP 800-53A: AC-17 (2).1; NIST SP 800-53 Rev 4: AC-17 (2); NIST SP 800-53 Rev 5: AC-17 (2)) | ||||||||||||||||||||||||
| Description: | Remote connections must be encrypted to prevent interception of data or sensitive information. Selecting "High Level" will ensure encryption of Remote Desktop Services sessions in both directions. Satisfies: SRG-OS-000033-GPOS-00014, SRG-OS-000250-GPOS-00093 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services\ Value Name: MinEncryptionLevel Type: REG_DWORD Value: 0x00000003 (3) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Remote Desktop Services >> Remote Desktop Session Host >> Security >> Set client connection encryption level to "Enabled" with "High Level" selected. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278117 - Windows Server 2025 must prevent attachments from being downloaded from RSS feeds.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278117r1181057_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000390 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Attachments from RSS feeds may not be secure. This setting will prevent attachments from being downloaded from RSS feeds. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Internet Explorer\Feeds\ Value Name: DisableEnclosureDownload Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> RSS Feeds >> Prevent downloading of enclosures to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278118 - Windows Server 2025 must disable Basic authentication for RSS feeds over HTTP.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278118r1182067_rule | ||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||
| Version: | WN25-CC-000400 | ||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||
| Description: | Basic authentication uses plain-text passwords that could be used to compromise a system. Disabling Basic authentication will reduce this potential. | ||||||||||||||||||||||
| Check Text: | The default behavior is for the Windows RSS platform to not use Basic authentication over HTTP connections. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Internet Explorer\Feeds\ Value Name: AllowBasicAuthInClear Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist) | ||||||||||||||||||||||
| Fix Text: | The default behavior is for the Windows RSS platform to not use Basic authentication over HTTP connections. To correct this, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> RSS Feeds >> Turn on Basic feed authentication over HTTP to "Not Configured" or "Disabled". | ||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||
| Tests: |
|
V-278119 - Windows Server 2025 must prevent Indexing of encrypted files.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278119r1181063_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000410 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Indexing of encrypted files may expose sensitive data. This setting prevents encrypted files from being indexed. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Windows Search\ Value Name: AllowIndexingEncryptedStoresOrItems Value Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Search >> Allow indexing of encrypted files to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278120 - Windows Server 2025 must prevent users from changing installation options.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278120r1181066_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000420 | ||||||||||||||||||||||||
| Identities: | CCI-003980 (NIST SP 800-53 Rev 5: CM-11 (2)) | ||||||||||||||||||||||||
| Description: | Installation options for applications are typically controlled by administrators. This setting prevents users from changing installation options that may bypass security features. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Installer\ Value Name: EnableUserControl Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> Allow user control over installs to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278122 - Windows Server 2025 users must be notified if a web-based program attempts to install software.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278122r1182069_rule | ||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||
| Version: | WN25-CC-000440 | ||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||
| Description: | Web-based programs may attempt to install malicious software on a system. Ensuring users are notified if a web-based program attempts to install software allows them to refuse the installation. | ||||||||||||||||||||||
| Check Text: | The default behavior is for Internet Explorer to warn users and select whether to allow or refuse installation when a web-based program attempts to install software on the system. If the registry value name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Installer\ Value Name: SafeForScripting Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist) | ||||||||||||||||||||||
| Fix Text: | The default behavior is for Internet Explorer to warn users and select whether to allow or refuse installation when a web-based program attempts to install software on the system. To correct this, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Installer >> Prevent Internet Explorer security prompt for Windows Installer scripts to "Not Configured" or "Disabled". | ||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||
| Tests: |
|
V-278123 - Windows Server 2025 must disable automatically signing in the last interactive user after a system-initiated restart.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278123r1181075_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-CC-000450 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Windows can be configured to automatically sign the user back in after a Windows Update restart. Some protections are in place to help ensure this is done in a secure fashion; however, disabling this will prevent the caching of credentials for this purpose and also ensure the user is aware of the restart. | ||||||||||||||||||||||||
| Check Text: | Verify the registry value below. If it does not exist or is not configured as specified, this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: DisableAutomaticRestartSignOn Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Logon Options >> Sign-in and lock last interactive user automatically after a restart to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278124 - Windows Server 2025 PowerShell script block logging must be enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278124r1181078_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000460 | ||||||||||||||||||||||||
| Identities: | CCI-000135 (NIST SP 800-53: AU-3 (1); NIST SP 800-53A: AU-3 (1).1 (ii); NIST SP 800-53 Rev 4: AU-3 (1); NIST SP 800-53 Rev 5: AU-3 (1)) | ||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Enabling PowerShell script block logging will record detailed information from the processing of PowerShell commands and scripts. This can provide additional detail when malware has run on a system. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\PowerShell\ScriptBlockLogging\ Value Name: EnableScriptBlockLogging Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows PowerShell >> Turn on PowerShell Script Block Logging to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278126 - Windows Server 2025 Windows Remote Management (WinRM) client must not allow unencrypted traffic.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278126r1181084_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000480 | ||||||||||||||||||||||||
| Identities: | CCI-002890 (NIST SP 800-53 Rev 4: MA-4 (6); NIST SP 800-53 Rev 5: MA-4 (6)) CCI-003123 (NIST SP 800-53 Rev 4: MA-4 (6); NIST SP 800-53 Rev 5: MA-4 (6)) | ||||||||||||||||||||||||
| Description: | Unencrypted remote access to a system can allow sensitive information to be compromised. Windows remote management connections must be encrypted to prevent this. Satisfies: SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowUnencryptedTraffic Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> Allow unencrypted traffic to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278127 - Windows Server 2025 Windows Remote Management (WinRM) client must not use Digest authentication.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278127r1181087_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000490 | ||||||||||||||||||||||||
| Identities: | CCI-000877 (NIST SP 800-53: MA-4 c; NIST SP 800-53A: MA-4.1 (iv); NIST SP 800-53 Rev 4: MA-4 c; NIST SP 800-53 Rev 5: MA-4 c) | ||||||||||||||||||||||||
| Description: | Digest authentication is not as strong as other options and may be subject to man-in-the-middle attacks. Disallowing Digest authentication will reduce this potential. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Client\ Value Name: AllowDigest Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Client >> Disallow Digest authentication to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278129 - Windows Server 2025 Windows Remote Management (WinRM) service must not allow unencrypted traffic.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278129r1181093_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000510 | ||||||||||||||||||||||||
| Identities: | CCI-002890 (NIST SP 800-53 Rev 4: MA-4 (6); NIST SP 800-53 Rev 5: MA-4 (6)) CCI-003123 (NIST SP 800-53 Rev 4: MA-4 (6); NIST SP 800-53 Rev 5: MA-4 (6)) | ||||||||||||||||||||||||
| Description: | Unencrypted remote access to a system can allow sensitive information to be compromised. Windows remote management connections must be encrypted to prevent this. Satisfies: SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Service\ Value Name: AllowUnencryptedTraffic Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> Allow unencrypted traffic to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278130 - Windows Server 2025 Windows Remote Management (WinRM) service must not store RunAs credentials.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278130r1181925_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000520 | ||||||||||||||||||||||||
| Identities: | CCI-004895 (NIST SP 800-53 Rev 5: SC-11 b) | ||||||||||||||||||||||||
| Description: | Storage of administrative credentials could allow unauthorized access. Disallowing the storage of RunAs credentials for WinRM will prevent them from being used with plug-ins. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\WinRM\Service\ Value Name: DisableRunAs Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows Remote Management (WinRM) >> WinRM Service >> Disallow WinRM from storing RunAs credentials to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278131 - Windows Server 2025 must have PowerShell Transcription enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278131r1181099_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000530 | ||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Enabling PowerShell Transcription will record detailed information from the processing of PowerShell commands and scripts. This can provide additional detail when malware has run on a system. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\PowerShell\Transcription\ Value Name: EnableTranscripting Value Type: REG_DWORD Value: 1 | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Windows PowerShell >> "Turn on PowerShell Transcription" to "Enabled". Specify the Transcript output directory to point to a Central Log Server or another secure location to prevent user access. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278133 - Windows Server 2025 Kerberos user logon restrictions must be enforced.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278133r1182071_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000020 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-001941 (NIST SP 800-53 Rev 4: IA-2 (8); NIST SP 800-53 Rev 5: IA-2 (8)) | ||||||||||||||||||||||||||||||||
| Description: | This policy setting determines whether the Kerberos Key Distribution Center (KDC) validates every request for a session ticket against the user rights policy of the target computer. The policy is enabled by default, which is the most secure setting for validating that access to target resources is not circumvented. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058 | ||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Verify the following is configured in the Default Domain Policy: Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If "Enforce user logon restrictions" is not set to "Enabled", this is a finding. | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Enforce user logon restrictions to "Enabled". | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278134 - Windows Server 2025 Kerberos service ticket maximum lifetime must be limited to 600 minutes or less.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278134r1182073_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000030 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-001941 (NIST SP 800-53 Rev 4: IA-2 (8); NIST SP 800-53 Rev 5: IA-2 (8)) | ||||||||||||||||||||||||||||||||
| Description: | This setting determines the maximum amount of time (in minutes) that a granted session ticket can be used to access a particular service. Session tickets are used only to authenticate new connections with servers. Ongoing operations are not interrupted if the session ticket used to authenticate the connection expires during the connection. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058 | ||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Verify the following is configured in the Default Domain Policy: Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the value for "Maximum lifetime for service ticket" is "0" or greater than "600" minutes, this is a finding. | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Maximum lifetime for service ticket to a maximum of "600" minutes, but not "0", which equates to "Ticket doesn't expire". | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278135 - Windows Server 2025 Kerberos user ticket lifetime must be limited to 10 hours or less.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278135r1182075_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000040 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-001941 (NIST SP 800-53 Rev 4: IA-2 (8); NIST SP 800-53 Rev 5: IA-2 (8)) | ||||||||||||||||||||||||||||||||
| Description: | In Kerberos, there are two types of tickets: Ticket Granting Tickets (TGTs) and Service Tickets. Kerberos tickets have a limited lifetime so the time an attacker has to implement an attack is limited. This policy controls how long TGTs can be renewed. With Kerberos, the user's initial authentication to the domain controller results in a TGT, which is then used to request Service Tickets to resources. Upon startup, each computer gets a TGT before requesting a service ticket to the domain controller and any other computers it needs to access. For services that start up under a specified user account, users must always get a TGT first and then get Service Tickets to all computers and services accessed. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058 | ||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Verify the following is configured in the Default Domain Policy: Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the value for "Maximum lifetime for user ticket" is "0" or greater than "10" hours, this is a finding. | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Maximum lifetime for user ticket to a maximum of "10" hours but not "0", which equates to "Ticket doesn't expire". | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278136 - Windows Server 2025 Kerberos policy user ticket renewal maximum lifetime must be limited to seven days or less.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278136r1182077_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-DC-000050 | ||||||||||||||||||||||||
| Identities: | CCI-001941 (NIST SP 800-53 Rev 4: IA-2 (8); NIST SP 800-53 Rev 5: IA-2 (8)) | ||||||||||||||||||||||||
| Description: | This setting determines the period of time (in days) during which a user's Ticket Granting Ticket (TGT) may be renewed. This security configuration limits the amount of time an attacker has to crack the TGT and gain access. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058 | ||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Verify the following is configured in the Default Domain Policy: Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the "Maximum lifetime for user ticket renewal" is greater than "7" days, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value in the Default Domain Policy for Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Maximum lifetime for user ticket renewal to a maximum of "7" days or less. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278137 - Windows Server 2025 computer clock synchronization tolerance must be limited to five minutes or less.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278137r1182079_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-DC-000060 | ||||||||||||||||||||||||
| Identities: | CCI-001941 (NIST SP 800-53 Rev 4: IA-2 (8); NIST SP 800-53 Rev 5: IA-2 (8)) | ||||||||||||||||||||||||
| Description: | This setting determines the maximum time difference (in minutes) that Kerberos will tolerate between the time on a client's clock and the time on a server's clock while still considering the two clocks synchronous. To prevent replay attacks, Kerberos uses timestamps as part of its protocol definition. For timestamps to work properly, the clocks of the client and the server must be in sync as much as possible. Satisfies: SRG-OS-000112-GPOS-00057, SRG-OS-000113-GPOS-00058 | ||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Verify the following is configured in the Default Domain Policy: Open "Group Policy Management". Navigate to "Group Policy Objects" in the Domain being reviewed (Forest >> Domains >> Domain). Right-click the "Default Domain Policy". Select "Edit". Navigate to Computer Configuration >> Policies >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy. If the "Maximum tolerance for computer clock synchronization" is greater than "5" minutes, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value in the Default Domain Policy for Computer Configuration >> Windows Settings >> Security Settings >> Account Policies >> Kerberos Policy >> Maximum tolerance for computer clock synchronization to a maximum of "5" minutes or less. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278143 - Windows Server 2025 data files owned by users must be on a different logical partition from the directory server data files.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278143r1182092_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000120 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-001090 (NIST SP 800-53: SC-4; NIST SP 800-53A: SC-4.1; NIST SP 800-53 Rev 4: SC-4; NIST SP 800-53 Rev 5: SC-4) | ||||||||||||||||||||||||||||||||
| Description: | When directory service data files, especially for directories used for identification, authentication, or authorization, reside on the same logical partition as user-owned files, the directory service data may be more vulnerable to unauthorized access or other availability compromises. Directory service and user-owned data files sharing a partition may be configured with less restrictive permissions to allow access to the user data. The directory service may be vulnerable to a denial-of-service (DoS) attack when user-owned files on a common partition are expanded to an extent preventing the directory service from acquiring more space for directory or audit data. | ||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Run "Regedit". Navigate to "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters". Note the directory locations in the values for "DSA Database file". Open a command prompt. Enter "net share". Note the logical drive(s) or file system partition for any organization-created data shares. Ignore system shares (e.g., NETLOGON, SYSVOL, and administrative shares ending in $). User shares that are hidden (ending with $) must not be ignored. If user shares are located on the same logical partition as the directory server data files, this is a finding. | ||||||||||||||||||||||||||||||||
| Fix Text: | Move shares used to store files owned by users to a different logical partition than the directory server data files. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278148 - Windows Server 2025 Active Directory Group Policy Objects (GPOs) must be configured with proper audit settings.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278148r1192632_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000170 | ||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||
| Description: | When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For Active Directory (AD), there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes GPOs. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203 | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the auditing configuration for all GPOs. Open "Group Policy Management" (available from various menus or run "gpmc.msc"). Navigate to "Group Policy Objects" in the domain being reviewed (Forest >> Domains >> Domain). For each GPO: Select the GPO item in the left pane. Select the "Delegation" tab in the right pane. Select "Advanced". Select "Advanced", and then select the "Auditing" tab. If the audit settings for any GPO are not at least as inclusive as those below, this is a finding: Type - Fail Principal - Everyone Access - Full Control Applies to - This object and all descendant objects or Descendant groupPolicyContainer objects The three Success types listed below are defaults inherited from the Parent Object. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Type - Success Principal - Everyone Access - Special (Permissions: Write all properties, Modify permissions; Properties: all "Write" type selected) Inherited from - Parent Object Applies to - Descendant groupPolicyContainer objects Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - blank (Permissions: none selected; Properties: one instance - Write gPLink, one instance - Write gPOptions) Inherited from - Parent Object Applies to - Descendant Organization Unit Objects | ||||||||||||||||||||||||||
| Fix Text: | Configure the audit settings for GPOs to include the following: This can be done at the Policy level in AD to apply to all group policies. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" from the "View" menu. Navigate to [Domain] >> System >> Policies in the left panel. Right-click "Policies", and then select "Properties". Select the "Security" tab. Select "Advanced". Select the "Auditing" tab. Type - Fail Principal - Everyone Access - Full Control Applies to - This object and all descendant objects or Descendant groupPolicyContainer objects The three Success types listed below are defaults inherited from the Parent Object. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Type - Success Principal - Everyone Access - Special (Permissions: Write all properties, Modify permissions; Properties: all "Write" type selected) Inherited from - Parent Object Applies to - Descendant groupPolicyContainer objects Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - blank (Permissions: none selected; Properties: one instance - Write gPLink, one instance - Write gPOptions) Inherited from - Parent Object Applies to - Descendant Organization Unit Objects | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278149 - Windows Server 2025 Active Directory (AD) Domain object must be configured with proper audit settings.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278149r1182104_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000180 | ||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||
| Description: | When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For AD, there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the Domain object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the auditing configuration for the Domain object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Verify "Advanced Features" is selected in the "View" menu. Select the domain being reviewed in the left pane. Right-click the domain name, and then select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. If the audit settings on the Domain object are not at least as inclusive as those below, this is a finding: Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object only The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - None Applies to - Special Type - Success Principal - Domain Users Access - All extended rights Inherited from - None Applies to - This object only Type - Success Principal - Administrators Access - All extended rights Inherited from - None Applies to - This object only Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Permissions: Write all properties, Modify permissions, Modify owner) | ||||||||||||||||||||||||||
| Fix Text: | Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu. Select the domain being reviewed in the left pane. Right-click the domain name and select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. Configure the audit settings for Domain object to include the following: Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object only The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - None Applies to - Special Type - Success Principal - Domain Users Access - All extended rights Inherited from - None Applies to - This object only Type - Success Principal - Administrators Access - All extended rights Inherited from - None Applies to - This object only Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Permissions: Write all properties, Modify permissions, Modify owner.) | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278150 - Windows Server 2025 Active Directory (AD) Infrastructure object must be configured with proper audit settings.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278150r1211157_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000190 | ||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||
| Description: | When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For AD, there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the Infrastructure object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the auditing configuration for the Infrastructure object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Verify "Advanced Features" is selected in the "View" menu. Select the domain being reviewed in the left pane. Right-click the "Infrastructure" object in the right pane and select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. If the audit settings on the Infrastructure object are not at least as inclusive as those below, this is a finding: Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None (Access - Special = Permissions: Write all properties, All extended rights, Change infrastructure master) Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Note: If only one success instance is listed (matching the values above), it is permissible to enter a second (identical) audit entry for the Infrastructure object. | ||||||||||||||||||||||||||
| Fix Text: | Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu. Select the domain being reviewed in the left pane. Right-click the "Infrastructure" object in the right pane and select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. Configure the audit settings for the Infrastructure object to include the following: Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None (Access - Special = Permissions: Write all properties, All extended rights, Change infrastructure master) Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Note: If only one success instance is listed (matching the values above), enter a second (identical) audit entry for the object. | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278151 - Windows Server 2025 Active Directory (AD) Domain Controllers Organizational Unit (OU) object must be configured with proper audit settings.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278151r1182108_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000200 | ||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||
| Description: | When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For AD, there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the Domain Controller OU object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the auditing configuration for the Domain Controller OU object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Verify "Advanced Features" is selected in the "View" menu. Select the "Domain Controllers OU" under the domain being reviewed in the left pane. Right-click the "Domain Controllers OU" object and select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. If the audit settings on the Domain Controllers OU object are not at least as inclusive as those below, this is a finding: Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object and all descendant objects The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Permissions: all create, delete and modify permissions) Type - Success Principal - Everyone Access - Write all properties Inherited from - None Applies to - This object and all descendant objects Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Applies to - Descendant Organizational Unit objects | ||||||||||||||||||||||||||
| Fix Text: | Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu. Select the "Domain Controllers OU" under the domain being reviewed in the left pane. Right-click the "Domain Controllers OU" object and select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. Configure the audit settings for Domain Controllers OU object to include the following: Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Permissions: all create, delete and modify permissions) Type - Success Principal - Everyone Access - Write all properties Inherited from - None Applies to - This object and all descendant objects Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Applies to - Descendant Organizational Unit objects | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278152 - Windows Server 2025 Active Directory (AD) AdminSDHolder object must be configured with proper audit settings.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278152r1211160_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000210 | ||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||
| Description: | When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For AD, there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the AdminSDHolder object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the auditing configuration for the "AdminSDHolder" object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Verify "Advanced Features" is selected in the "View" menu. Select "System" under the domain being reviewed in the left pane. Right-click the "AdminSDHolder" object in the right pane and select "Properties". Select the "Security" tab. Select "Advanced" and then select the "Auditing" tab. If the audit settings on the "AdminSDHolder" object are not at least as inclusive as those below, this is a finding: Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object only The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Write all properties, Modify permissions, Modify owner) Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Applies to - Descendant Organizational Unit objects Note: If only one success instance is listed (matching the values above), it is valid to enter a second (identical) audit entry for the object. | ||||||||||||||||||||||||||
| Fix Text: | Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu. Select "System" under the domain being reviewed in the left pane. Right-click the "AdminSDHolder" object in the right pane and select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. Configure the audit settings for the AdminSDHolder object to include the following: Type - Fail Principal - Everyone Access - Full Control Inherited from - None Applies to - This object only The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None Applies to - This object only (Access - Special = Write all properties, Modify permissions, Modify owner) Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) Applies to - Descendant Organizational Unit objects Note: If only one success instance is listed (matching the values above), enter a second (identical) audit entry for the object. | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278153 - Windows Server 2025 Active Directory (AD) RID Manager$ object must be configured with proper audit settings.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278153r1182112_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000220 | ||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||
| Description: | When inappropriate audit settings are configured for directory service database objects, it may be possible for a user or process to update the data without generating any tracking data. The impact of missing audit data is related to the type of object. A failure to capture audit data for objects used by identification, authentication, or authorization functions could degrade or eliminate the ability to track changes to access policy for systems or data. For AD, there are a number of critical object types in the domain naming context of the AD database for which auditing is essential. This includes the RID Manager$ object. Because changes to these objects can significantly impact access controls or the availability of systems, the absence of auditing data makes it impossible to identify the source of changes that impact the confidentiality, integrity, and availability of data and systems throughout an AD domain. The lack of proper auditing can result in insufficient forensic evidence needed to investigate an incident and prosecute the intruder. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the auditing configuration for the "RID Manager$" object. Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Verify "Advanced Features" is selected in the "View" menu. Select "System" under the domain being reviewed in the left pane. Right-click the "RID Manager$" object in the right pane and select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. If the audit settings on the "RID Manager$" object are not at least as inclusive as those below, this is a finding: Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None (Access - Special = Write all properties, All extended rights, Change RID master) Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) | ||||||||||||||||||||||||||
| Fix Text: | Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu. Select "System" under the domain being reviewed in the left pane. Right-click the "RID Manager$" object in the right pane and select "Properties". Select the "Security" tab. Select "Advanced", and then select the "Auditing" tab. Configure the audit settings for RID Manager$ object to include the following: Type - Fail Principal - Everyone Access - Full Control Inherited from - None The success types listed below are defaults. Where Special is listed in the summary screens for Access, detailed Permissions are provided for reference. Various Properties selections may also exist by default. Type - Success Principal - Everyone Access - Special Inherited from - None (Access - Special = Write all properties, All extended rights, Change RID master) Two instances with the following summary information will be listed: Type - Success Principal - Everyone Access - (blank) Inherited from - (CN of domain) | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278154 - Windows Server 2025 must be configured to audit Account Management - Computer Account Management successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278154r1182114_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000230 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000018 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-001403 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-001404 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-001405 (NIST SP 800-53: AC-2 (4); NIST SP 800-53A: AC-2 (4).1 (i and ii); NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) CCI-002130 (NIST SP 800-53 Rev 4: AC-2 (4); NIST SP 800-53 Rev 5: AC-2 (4)) | ||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Computer Account Management records events such as creating, changing, deleting, renaming, disabling, or enabling computer accounts. Satisfies: SRG-OS-000004-GPOS-00004, SRG-OS-000239-GPOS-00089, SRG-OS-000240-GPOS-00090, SRG-OS-000241-GPOS-00091, SRG-OS-000303-GPOS-00120, SRG-OS-000476-GPOS-00221 | ||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*" Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: Account Management >> Computer Account Management - Success | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Account Management >> Audit Computer Account Management with Success selected. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278155 - Windows Server 2025 must be configured to audit DS Access - Directory Service Access successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278155r1182116_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000240 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Access records events related to users accessing an Active Directory object. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*". Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: DS Access >> Directory Service Access - Success | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> Directory Service Access with Success selected. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278156 - Windows Server 2025 must be configured to audit DS Access - Directory Service Access failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278156r1182118_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000250 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Access records events related to users accessing an Active Directory object. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*". Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: DS Access >> Directory Service Access - Failure | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> Directory Service Access with "Failure" selected. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278157 - Windows Server 2025 must be configured to audit DS Access - Directory Service Changes successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278157r1182120_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000260 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Changes records events related to changes made to objects in Active Directory Domain Services. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*". Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: DS Access >> Directory Service Changes - Success | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> Directory Service Changes with "Success" selected. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278158 - Windows Server 2025 must be configured to audit DS Access - Directory Service Changes failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278158r1182122_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000270 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) CCI-002234 (NIST SP 800-53 Rev 4: AC-6 (9); NIST SP 800-53 Rev 5: AC-6 (9)) | ||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Audit Directory Service Changes records events related to changes made to objects in Active Directory Domain Services. Satisfies: SRG-OS-000327-GPOS-00127, SRG-OS-000458-GPOS-00203, SRG-OS-000463-GPOS-00207, SRG-OS-000468-GPOS-00212 | ||||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Security Option "Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings" must be set to "Enabled" (WN25-SO-000050) for the detailed auditing subcategories to be effective. Use the "AuditPol" tool to review the current Audit Policy configuration. Open PowerShell or a command prompt with elevated privileges ("Run as administrator"). Enter "AuditPol /get /category:*". Compare the "AuditPol" settings with the following. If the system does not audit the following, this is a finding: DS Access >> Directory Service Changes - Failure | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> DS Access >> Directory Service Changes with "Failure" selected. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278159 - Windows Server 2025 domain controllers must have a PKI server certificate.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278159r1182124_rule | ||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||
| Version: | WN25-DC-000280 | ||||||||||||||||||
| Identities: | CCI-000185 (NIST SP 800-53: IA-5 (2); NIST SP 800-53A: IA-5 (2).1; NIST SP 800-53 Rev 4: IA-5 (2) (a); NIST SP 800-53 Rev 5: IA-5 (2) (b) (1)) | ||||||||||||||||||
| Description: | Domain controllers are part of the chain of trust for PKI authentications. Without the appropriate certificate, the authenticity of the domain controller cannot be verified. Domain controllers must have a server certificate to establish authenticity as part of PKI authentications in the domain. | ||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Run "MMC". Select "Add/Remove Snap-in" from the "File" menu. Select "Certificates" in the left pane, and then click "Add >". Select "Computer Account", and then click "Next". Select the appropriate option for "Select the computer you want this snap-in to manage", and then click "Finish". Click "OK". Select and expand the "Certificates (Local Computer)" entry in the left pane. Select and expand the "Personal" entry in the left pane. Select the "Certificates" entry in the left pane. If no certificate for the domain controller exists in the right pane, this is a finding. | ||||||||||||||||||
| Fix Text: | Obtain a server certificate for the domain controller. | ||||||||||||||||||
| Severity: | medium | ||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||
| Reference: |
| ||||||||||||||||||
| Definitions: |
| ||||||||||||||||||
| Tests: |
|
V-278162 - Windows Server 2025 Active Directory (AD) user accounts, including administrators, must be configured to require the use of a common access card (CAC), Personal Identity Verification (PIV)-compliant hardware token, or Alternate Logon Token (ALT) for user authentication.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278162r1211161_rule | ||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||
| Version: | WN25-DC-000310 | ||||||||||||||||||||
| Identities: | CCI-000765 (NIST SP 800-53: IA-2 (1); NIST SP 800-53A: IA-2 (1).1; NIST SP 800-53 Rev 4: IA-2 (1); NIST SP 800-53 Rev 5: IA-2 (1)) CCI-004046 (NIST SP 800-53 Rev 5: IA-2 (6) (a)) CCI-004047 (NIST SP 800-53 Rev 5: IA-2 (6) (b)) | ||||||||||||||||||||
| Description: | Smart cards such as the CAC support a two-factor authentication technique. This provides a higher level of trust in the asserted identity than use of the username and password for authentication. Satisfies: SRG-OS-000105-GPOS-00052, SRG-OS-000107-GPOS-00054, SRG-OS-000108-GPOS-00055, SRG-OS-000375-GPOS-00160, SRG-OS-000705-GPOS-00150 | ||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Open PowerShell. Enter the following: "Get-ADUser -Filter {(Enabled -eq $True) -and (SmartcardLogonRequired -eq $False)} | FT Name" ("DistinguishedName" may be substituted for "Name" for more detailed output.) If any user accounts, including administrators, are listed, this is a finding. Alternately: To view sample accounts in "Active Directory Users and Computers" (available from various menus or run "dsa.msc"): Select the Organizational Unit (OU) where the user accounts are located. (By default, this is the Users node; however, accounts may be under other organization-defined OUs.) Right-click the sample user account and select "Properties". Select the "Account" tab. If any user accounts, including administrators, do not have "Smart card is required for interactive logon" checked in the "Account Options" area, this is a finding. | ||||||||||||||||||||
| Fix Text: | Configure all user accounts, including administrator accounts, in AD to enable the option "Smart card is required for interactive logon". Run "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select the OU where the user accounts are located. (By default, this is the Users node; however, accounts may be under other organization-defined OUs.) Right-click the user account and select "Properties". Select the "Account" tab. Check "Smart card is required for interactive logon" in the "Account Options" area. | ||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||
| Tests: |
|
V-278163 - Windows Server 2025 domain controllers must require LDAP access signing.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278163r1182132_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000320 | ||||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||||
| Description: | Unsigned network traffic is susceptible to man-in-the-middle attacks, where an intruder captures packets between the server and the client and modifies them before forwarding them to the client. In the case of an LDAP server, this means that an attacker could cause a client to make decisions based on false records from the LDAP directory. The risk of an attacker pulling this off can be decreased by implementing strong physical security measures to protect the network infrastructure. Furthermore, implementing Internet Protocol security (IPsec) authentication header (AH) mode, which performs mutual authentication and packet integrity for IP traffic, can make all types of man-in-the-middle attacks extremely difficult. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\NTDS\Parameters\ Value Name: LDAPServerIntegrity Value Type: REG_DWORD Value: 0x00000002 (2) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain controller: LDAP server signing requirements Enforcement to "Not Configured" or "Enabled". | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278164 - Windows Server 2025 domain controllers must be configured to allow reset of machine account passwords.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278164r1182134_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-DC-000330 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Enabling this setting on all domain controllers in a domain prevents domain members from changing their computer account passwords. If these passwords are weak or compromised, the inability to change them may leave these computers vulnerable. | ||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RefusePasswordChange Value Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain controller: Refuse machine account password changes to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278165 - The Windows Server 2025 "Access this computer from the network" user right must only be assigned to the Administrators, Authenticated Users, and Enterprise Domain Controllers groups on domain controllers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278165r1182136_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000340 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Access this computer from the network" right may access resources on the system, and this right must be limited to those requiring it. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Access this computer from the network" right, this is a finding: - Administrators. - Authenticated Users. - Enterprise Domain Controllers. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeNetworkLogonRight" user right, this is a finding. S-1-5-32-544 (Administrators) S-1-5-11 (Authenticated Users) S-1-5-9 (Enterprise Domain Controllers) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Access this computer from the network to include only the following accounts or groups: - Administrators. - Authenticated Users. - Enterprise Domain Controllers. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278166 - The Windows Server 2025 "Add workstations to domain" user right must only be assigned to the Administrators group on domain controllers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278166r1182138_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000350 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Add workstations to domain" right may add computers to a domain. This could result in unapproved or incorrectly configured systems being added to a domain. | ||||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Add workstations to domain" right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeMachineAccountPrivilege" user right, this is a finding. S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Add workstations to domain to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278167 - The Windows Server 2025 "Allow log on through Remote Desktop Services" user right must only be assigned to the Administrators group on domain controllers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278167r1182140_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000360 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Allow log on through Remote Desktop Services" user right can access a system through Remote Desktop. | ||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers, it is not applicable for other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Allow log on through Remote Desktop Services" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeRemoteInteractiveLogonRight" user right, this is a finding. S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Allow log on through Remote Desktop Services to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278168 - The Windows Server 2025 "Deny access to this computer from the network" user right on domain controllers must be configured to prevent unauthenticated access.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278168r1182141_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000370 | ||||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny access to this computer from the network" user right defines the accounts that are prevented from logging on from the network. The Guests group must be assigned this right to prevent unauthenticated access. | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny access to this computer from the network" user right, this is a finding: - Guests Group. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyNetworkLogonRight" user right, this is a finding. S-1-5-32-546 (Guests) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny access to this computer from the network to include the following: - Guests Group. | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278169 - The Windows Server 2025 "Deny log on as a batch job" user right on domain controllers must be configured to prevent unauthenticated access.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278169r1182142_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000380 | ||||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny log on as a batch job" user right defines accounts that are prevented from logging on to the system as a batch job, such as Task Scheduler. The Guests group must be assigned to prevent unauthenticated access. | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on as a batch job" user right, this is a finding: - Guests Group. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SID(s) are not defined for the "SeDenyBatchLogonRight" user right, this is a finding: S-1-5-32-546 (Guests) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on as a batch job to include the following: - Guests Group. | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278170 - The Windows Server 2025 "Deny log on as a service" user right must be configured to include no accounts or groups (blank) on domain controllers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278170r1182143_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-DC-000390 | ||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny log on as a service" user right defines accounts that are denied logon as a service. Incorrect configurations could prevent services from starting and result in a denial of service. | ||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are defined for the "Deny log on as a service" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeDenyServiceLogonRight" user right, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on as a service to include no entries (blank). | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278171 - The Windows Server 2025 "Deny log on locally" user right on domain controllers must be configured to prevent unauthenticated access.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278171r1182144_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000400 | ||||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny log on locally" user right defines accounts that are prevented from logging on interactively. The Guests group must be assigned this right to prevent unauthenticated access. | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on locally" user right, this is a finding: - Guests Group. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SID(s) are not defined for the "SeDenyInteractiveLogonRight" user right, this is a finding: S-1-5-32-546 (Guests) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on locally to include the following: - Guests Group. | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278173 - Windows Server 2025 must be configured for name-based strong mappings for certificates.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278173r1182146_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-DC-000406 | ||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||
| Description: | Weak mappings give rise to security vulnerabilities and demand hardening measures. Certificate names must be correctly mapped to the intended user account in Active Directory. A lack of strong name-based mappings allows certain weak certificate mappings, such as Issuer/Subject AltSecID and User Principal Names (UPN) mappings, to be treated as strong mappings. | ||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. This is not applicable for member servers. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Administrative Template >> System >> KDC >> Allow name-based strong mappings for certificates. If "Allow name-based strong mappings for certificates" is not "Enabled", this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Template >> System >> KDC >> Allow name-based strong mappings for certificates to "Enabled". The policy must contain exactly one certificate thumbprint per rule, with each rule represented as a tuple. Thumbprints must be unique and cannot be repeated in multiple rules. The sections of each tuple that are separated by semi-colons must be in the stated order, while the fields separated by commas can be in any order. The rules themselves are separated by new lines. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278174 - The Windows Server 2025 "Deny log on through Remote Desktop Services" user right on domain controllers must be configured to prevent unauthenticated access.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278174r1182147_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000410 | ||||||||||||||||||||||||||
| Identities: | CCI-002314 (NIST SP 800-53 Rev 4: AC-17 (1); NIST SP 800-53 Rev 5: AC-17 (1)) | ||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny log on through Remote Desktop Services" user right defines the accounts that are prevented from logging on using Remote Desktop Services. The Guests group must be assigned this right to prevent unauthenticated access. | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on through Remote Desktop Services" user right, this is a finding: - Guests Group. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SID(s) are not defined for the "SeDenyRemoteInteractiveLogonRight" user right, this is a finding: S-1-5-32-546 (Guests) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on through Remote Desktop Services to include the following: - Guests Group. | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278175 - The Windows Server 2025 "Enable computer and user accounts to be trusted for delegation" user right must only be assigned to the Administrators group on domain controllers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278175r1182148_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-DC-000420 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Enable computer and user accounts to be trusted for delegation" user right allows the "Trusted for Delegation" setting to be changed. This could allow unauthorized users to impersonate other users. | ||||||||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. A separate version applies to other systems. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Enable computer and user accounts to be trusted for delegation" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeEnableDelegationPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Enable computer and user accounts to be trusted for delegation to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278176 - The password for the krbtgt account on a domain must be reset at least every 180 days.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278176r1256743_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-DC-000430 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | The krbtgt account acts as a service account for the Kerberos Key Distribution Center (KDC) service. The account and password are created when a domain is created and the password is typically not changed. If the krbtgt account is compromised, attackers can create valid Kerberos Ticket Granting Tickets (TGT). The password must be changed twice to effectively remove the password history. Changing once, waiting for replication to complete and the amount of time equal to or greater than the maximum Kerberos ticket lifetime, and changing again reduces the risk of issues. | ||||||||||||||||||||||||
| Check Text: | This requirement is applicable to domain controllers; it is not applicable for other systems. Open "Windows PowerShell". Enter "Get-ADUser krbtgt -Property PasswordLastSet". If the "PasswordLastSet" date is more than 180 days old, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Reset the password for the krbtgt account at least every 180 days. The password must be changed twice to effectively remove the password history. Changing once, waiting for replication to complete, and changing again reduces the risk of issues. Changing twice in rapid succession forces clients to reauthenticate (including application services) but is desired if a compromise is suspected. PowerShell scripts are available to accomplish this such as at the following link: https://gallery.technet.microsoft.com/Reset-the-krbtgt-account-581a9e51 Open "Active Directory Users and Computers" (available from various menus or run "dsa.msc"). Select "Advanced Features" in the "View" menu if not previously selected. Select the "Users" node. Right-click on the krbtgt account and select "Reset password". Enter a password that meets password complexity requirements. Clear the "User must change password at next logon" check box. The system will automatically change this to a system-generated complex password. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278178 - Windows Server 2025 local administrator accounts must have their privileged token filtered to prevent elevated privileges from being used over the network on domain-joined member servers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278178r1182282_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000020 | ||||||||||
| Identities: | CCI-001084 (NIST SP 800-53: SC-3; NIST SP 800-53A: SC-3.1 (ii); NIST SP 800-53 Rev 4: SC-3; NIST SP 800-53 Rev 5: SC-3) | ||||||||||
| Description: | A compromised local administrator account can provide means for an attacker to move laterally between domain systems. With User Account Control enabled, filtering the privileged token for local administrator accounts will prevent the elevated privileges of these accounts from being used over the network. | ||||||||||
| Check Text: | This applies to member servers. For domain controllers and stand-alone or nondomain-joined systems, this is not applicable. If the following registry value does not exist or is not configured as specified, this is a finding: Registry HiveHKEY_LOCAL_MACHINE Registry Path\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System Value NameLocalAccountTokenFilterPolicy TypeREG_DWORD Value: 0x00000000 (0) This setting may cause issues with some network scanning tools if local administrative accounts are used remotely. Scans must use domain accounts where possible. If a local administrative account must be used, temporarily enabling the privileged token by configuring the registry value to "1" may be required. | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> MS Security Guide >> Apply UAC restrictions to local accounts on network logons to "Enabled". This policy setting requires the installation of the SecGuide custom templates included with the STIG package. "SecGuide.admx" and " SecGuide.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278179 - Windows Server 2025 local users on domain-joined member servers must not be enumerated.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278179r1182284_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000030 | ||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||
| Description: | The username is one part of logon credentials that could be used to gain access to a system. Preventing the enumeration of users limits this information to authorized personnel. | ||||||||||
| Check Text: | This applies to member servers. For domain controllers and stand-alone or nondomain-joined systems, this is not applicable. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\System\ Value Name: EnumerateLocalUsers Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Logon >> Enumerate local users on domain-joined computers to "Disabled". | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278180 - Windows Server 2025 must restrict unauthenticated Remote Procedure Call (RPC) clients from connecting to the RPC server on domain-joined member servers and stand-alone or nondomain-joined systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278180r1182286_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000040 | ||||||||||
| Identities: | CCI-001967 (NIST SP 800-53 Rev 4: IA-3 (1); NIST SP 800-53 Rev 5: IA-3 (1)) | ||||||||||
| Description: | Unauthenticated RPC clients may allow anonymous access to sensitive information. Configuring RPC to restrict unauthenticated RPC clients from connecting to the RPC server will prevent anonymous connections. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems, it is not applicable for domain controllers. If the following registry value does not exist or is not configured as specified, this is a finding: Registry HiveHKEY_LOCAL_MACHINE Registry Path\SOFTWARE\Policies\Microsoft\Windows NT\Rpc\ Value NameRestrictRemoteClients TypeREG_DWORD Value0x00000001 (1) | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> System >> Remote Procedure Call >> Restrict Unauthenticated RPC clients to "Enabled" with "Authenticated" selected. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278181 - Windows Server 2025 must limit the caching of logon credentials to four or less on domain-joined member servers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278181r1182288_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000050 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | The default Windows configuration caches the last logon credentials for users who log on interactively to a system. This feature is provided for system availability reasons, such as the user's machine being disconnected from the network or domain controllers being unavailable. Even though the credential cache is well protected, if a system is attacked, an unauthorized individual may isolate the password to a domain user account using a password-cracking program and gain access to the domain. | ||||||||||
| Check Text: | This applies to member servers. For domain controllers and stand-alone or nondomain-joined systems, this is not applicable. If the following registry value does not exist or is not configured as specified, this is a finding: Registry HiveHKEY_LOCAL_MACHINE Registry Path\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value NameCachedLogonsCount Value TypeREG_SZ Value4 (or less) | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Interactive Logon: Number of previous logons to cache (in case Domain Controller is not available) to "4" logons or less. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278182 - Windows Server 2025 must restrict remote calls to the Security Account Manager (SAM) to Administrators on domain-joined member servers and stand-alone or nondomain-joined systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278182r1182290_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000060 | ||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||
| Description: | The Windows SAM stores users' passwords. Restricting Remote Procedure Call (RPC) connections to the SAM to Administrators helps protect those credentials. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems; it is not applicable for domain controllers. If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: RestrictRemoteSAM Value Type: REG_SZ Value: O:BAG:BAD:(A;;RC;;;BA) | ||||||||||
| Fix Text: | Navigate to the policy Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Restrict clients allowed to make remote calls to SAM. Select "Edit Security" to configure the "Security descriptor:". Add "Administrators" in "Group or user names:" if it is not already listed (this is the default). Select "Administrators" in "Group or user names:". Select "Allow" for "Remote Access" in "Permissions for "Administrators". Click "OK". The "Security descriptor:" must be populated with "O:BAG:BAD:(A;;RC;;;BA) for the policy to be enforced. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278183 - Windows Server 2025 "Access this computer from the network" user right must only be assigned to the Administrators and Authenticated Users groups on domain-joined member servers and stand-alone or nondomain-joined systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278183r1182327_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000070 | ||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Access this computer from the network" user right may access resources on the system, and this right must be limited to those requiring it. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Access this computer from the network" user right, this is a finding: - Administrators. - Authenticated Users. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeNetworkLogonRight" user right, this is a finding: S-1-5-32-544 (Administrators) S-1-5-11 (Authenticated Users) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Access this computer from the network to include only the following accounts or groups: - Administrators. - Authenticated Users. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278184 - The Windows Server 2025 "Deny access to this computer from the network" user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and local accounts and from unauthenticated access on all systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278184r1182294_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000080 | ||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny access to this computer from the network" user right defines the accounts that are prevented from logging on from the network. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Local accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny access to this computer from the network" user right, this is a finding: Domain Systems Only: - Enterprise Admins group. - Domain Admins group. - "Local account and member of Administrators group" or "Local account" (see Note below). All Systems: - Guests group. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyNetworkLogonRight" user right, this is a finding. Domain Systems Only: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) S-1-5-114 ("Local account and member of Administrators group") or S-1-5-113 ("Local account") All Systems: S-1-5-32-546 (Guests) Note: These are built-in security groups. "Local account" is more restrictive but may cause issues on servers such as systems that provide failover clustering. | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny access to this computer from the network to include the following: Domain Systems Only: - Enterprise Admins group. - Domain Admins group. - "Local account and member of Administrators group" or "Local account" (see Note below). All Systems: - Guests group. Note: These are built-in security groups. "Local account" is more restrictive but may cause issues on servers such as systems that provide failover clustering. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278185 - Windows Server 2025 Deny log on as a batch job user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and from unauthenticated access on all systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278185r1182296_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000090 | ||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny log on as a batch job" user right defines accounts that are prevented from logging on to the system as a batch job, such as Task Scheduler. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. The Guests group must be assigned to prevent unauthenticated access. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on as a batch job" user right, this is a finding: Domain Systems Only: - Enterprise Admins Group. - Domain Admins Group. All Systems: - Guests Group. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyBatchLogonRight" user right, this is a finding. Domain Systems Only: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) All Systems: S-1-5-32-546 (Guests) | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on as a batch job to include the following: Domain Systems Only: - Enterprise Admins Group. - Domain Admins Group. All Systems: - Guests Group. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278186 - The Windows Server 2025 "Deny log on as a service" user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts. No other groups or accounts must be assigned this right.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278186r1182299_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000100 | ||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny log on as a service" user right defines accounts that are denied logon as a service. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Incorrect configurations could prevent services from starting and result in a denial of service. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on as a service" user right on domain-joined systems, this is a finding: - Enterprise Admins Group. - Domain Admins Group. If any accounts or groups are defined for the "Deny log on as a service" user right on nondomain-joined systems, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyServiceLogonRight" user right on domain-joined systems, this is a finding: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) If any SIDs are defined for the user right on nondomain-joined systems, this is a finding. | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on as a service to include the following: Domain systems: - Enterprise Admins Group. - Domain Admins Group. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278187 - The Windows Server 2025 "Deny log on locally" user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and from unauthenticated access on all systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278187r1182301_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000110 | ||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny log on locally" user right defines accounts that are prevented from logging on interactively. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. The Guests group must be assigned this right to prevent unauthenticated access. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on locally" user right, this is a finding: Domain Systems Only: - Enterprise Admins Group. - Domain Admins Group. All Systems: - Guests Group. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyInteractiveLogonRight" user right, this is a finding: Domain Systems Only: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) All Systems: S-1-5-32-546 (Guests) | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on locally to include the following: Domain Systems Only: - Enterprise Admins Group. - Domain Admins Group. All Systems: - Guests Group. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278188 - The Windows Server 2025 "Deny log on through Remote Desktop Services" user right on domain-joined member servers must be configured to prevent access from highly privileged domain accounts and all local accounts and from unauthenticated access on all systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278188r1182303_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000120 | ||||||||||
| Identities: | CCI-002314 (NIST SP 800-53 Rev 4: AC-17 (1); NIST SP 800-53 Rev 5: AC-17 (1)) | ||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Deny log on through Remote Desktop Services" user right defines the accounts that are prevented from logging on using Remote Desktop Services. In an Active Directory Domain, denying logons to the Enterprise Admins and Domain Admins groups on lower-trust systems helps mitigate the risk of privilege escalation from credential theft attacks, which could lead to the compromise of an entire domain. Local accounts on domain-joined systems must also be assigned this right to decrease the risk of lateral movement resulting from credential theft attacks. The Guests group must be assigned this right to prevent unauthenticated access. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If the following accounts or groups are not defined for the "Deny log on through Remote Desktop Services" user right, this is a finding: Domain Systems Only: - Enterprise Admins group. - Domain Admins group. - Local account (see Note below). All Systems: - Guests group. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If the following SIDs are not defined for the "SeDenyRemoteInteractiveLogonRight" user right, this is a finding. Domain Systems Only: S-1-5-root domain-519 (Enterprise Admins) S-1-5-domain-512 (Domain Admins) S-1-5-113 ("Local account") All Systems: S-1-5-32-546 (Guests) Note: "Local account" refers to the Windows built-in security group. | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Deny log on through Remote Desktop Services to include the following: Domain Systems Only: - Enterprise Admins group. - Domain Admins group. - Local account (see Note below). All Systems: - Guests group. Note: "Local account" refers to the Windows built-in security group. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278189 - The Windows Server 2025 "Enable computer and user accounts to be trusted for delegation" user right must not be assigned to any groups or accounts on domain-joined member servers and stand-alone or nondomain-joined systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278189r1182305_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-MS-000130 | ||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Enable computer and user accounts to be trusted for delegation" user right allows the "Trusted for Delegation" setting to be changed. This could allow unauthorized users to impersonate other users. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems. A separate version applies to domain controllers. Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Enable computer and user accounts to be trusted for delegation" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeEnableDelegationPrivilege" user right, this is a finding. | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Enable computer and user accounts to be trusted for delegation to be defined but containing no entries (blank). | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278192 - Windows Server 2025 must have the DoW Root Certificate Authority (CA) certificates installed in the Trusted Root Store.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278192r1256723_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-PK-000010 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000185 (NIST SP 800-53: IA-5 (2); NIST SP 800-53A: IA-5 (2).1; NIST SP 800-53 Rev 4: IA-5 (2) (a); NIST SP 800-53 Rev 5: IA-5 (2) (b) (1)) CCI-002470 (NIST SP 800-53 Rev 4: SC-23 (5); NIST SP 800-53 Rev 5: SC-23 (5)) CCI-004909 (NIST SP 800-53 Rev 5: SC-17 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | To ensure secure DoW websites and DoW-signed code are properly validated, the system must trust the DoW Root CAs. The DoW root certificates will ensure that the trust chain is established for server certificates issued from the DoW CAs. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182, SRG-OS-000775-GPOS-00230 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the DoW Root CA certificates are installed as Trusted Root Certification Authorities. The certificates referenced below apply to unclassified systems. Refer to the PKE documentation for other networks. Open PowerShell as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\root | Where Subject -Like "*DOD*" | FL Subject, NotAfter If valid (and unexpired) DoW Root CA certificates (such as those below) are not listed, this is a finding. Note: The Common Names (CN) below are examples. Verify that the "CN" displayed is a DoW Root CA and is not expired. Subject: CN=DOD Root CA 3, OU=PKI, OU=DOD, O=U.S. Government, C=US NotAfter: 12/30/2029 Subject: CN=DOD Root CA 5, OU=PKI, OU=DOD, O=U.S. Government, C=US NotAfter: 6/14/2041 Subject: CN=DOD Root CA 6, OU=PKI, OU=DOD, O=U.S. Government, C=US NotAfter: 1/24/2053 Alternately, use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates" and click "Add". Select "Computer account" and click "Next". Select "Local computer: (the computer this console is running on)" and click "Finish". Click "OK". Expand "Certificates" and navigate to "Trusted Root Certification Authorities >> Certificates". For each of the DoW Root CA certificates noted below: Right-click the certificate and select "Open". Select the "Details" tab. Verify that expiration date is in the future. If valid (unexpired) DoW Root CA certificates (such as those below) are not listed, this is a finding. DOD Root CA 3 DOD Root CA 5 DOD Root CA 6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Install valid and unexpired DoW Root CA certificates. DOD Root CA 3 DOD Root CA 5 DOD Root CA 6 The InstallRoot tool is available on Cyber Exchange at https://cyber.mil/pki-pke/tools-configuration-files. Certificate bundles published by the PKI can be found at https://crl.gds.disa.mil/. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278193 - Windows Server 2025 must have the DoW Interoperability Root Certificate Authority (CA) cross-certificates installed in the Untrusted Certificates Store on unclassified systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278193r1256726_rule | ||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||
| Version: | WN25-PK-000020 | ||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000185 (NIST SP 800-53: IA-5 (2); NIST SP 800-53A: IA-5 (2).1; NIST SP 800-53 Rev 4: IA-5 (2) (a); NIST SP 800-53 Rev 5: IA-5 (2) (b) (1)) CCI-002470 (NIST SP 800-53 Rev 4: SC-23 (5); NIST SP 800-53 Rev 5: SC-23 (5)) | ||||||||||||||||||||||||||||||||||||
| Description: | To ensure users do not experience denial of service when performing certificate-based authentication to DoW websites due to the system chaining to a root other than DoW Root CAs, the DoW Interoperability Root CA cross-certificates must be installed in the Untrusted Certificate Store. This requirement only applies to unclassified systems. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182 | ||||||||||||||||||||||||||||||||||||
| Check Text: | This is applicable to unclassified systems. It is not applicable for others. Open "PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\disallowed | Where {$_.Issuer -Like "*DOD Interoperability*" -and $_.Subject -Like "*DOD*"} | FL Subject, NotAfter If valid DoW Interoperability cross-certificates (such as those below) are not listed, this is a finding. Subject: CN=DoD Interoperability Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US NotAfter: 11/24/2030 Alternately, use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates" and click "Add". Select "Computer account" and click "Next". Select "Local computer: (the computer this console is running on)" and click "Finish". Click "OK". Expand "Certificates" and navigate to Untrusted Certificates >> Certificates. For each DoW Interoperability Root CA certificate displayed: Right-click the certificate and select "Open". Select the "Details" tab. Verify that the Expiration Date is a future date. Scroll to the bottom and select "Subject". If any of the certificates listed do not include "DoD Interoperability Root CA" in the Subject name or are expired, this is a finding. Note: The list below should not be relied upon as a complete set of possible DoW Interoperability Root CA certificates. DOD Interoperability Root CA 2 Note: Interoperability cross-certificates will have a different value (such as "...Root CA 6") in the 'Issued To' field than in the 'Subject' and 'Issuer' fields. | ||||||||||||||||||||||||||||||||||||
| Fix Text: | Install valid and unexpired DoW Interoperability Root CA cross-certificates on unclassified systems. The list below is not to be treated as exhaustive. The STIG should not be used as a definitive resource for the organizationally approved certificates for the systems. DoD Interoperability Root CA 2 Administrators must run the Federal Bridge Certification Authority (FBCA) Cross-Certificate Removal Tool once as an administrator and once as the current user. The FBCA Cross-Certificate Remover Tool and User Guide are available on Cyber Exchange at https://cyber.mil/pki-pke/tools-configuration-files. Certificate bundles published by the PKI can be found at https://crl.gds.disa.mil/. | ||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278194 - Windows Server 2025 must have the US DoW CCEB Interoperability Root CA cross-certificates in the Untrusted Certificates Store on unclassified systems.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278194r1256729_rule | ||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||
| Version: | WN25-PK-000030 | ||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000185 (NIST SP 800-53: IA-5 (2); NIST SP 800-53A: IA-5 (2).1; NIST SP 800-53 Rev 4: IA-5 (2) (a); NIST SP 800-53 Rev 5: IA-5 (2) (b) (1)) CCI-002470 (NIST SP 800-53 Rev 4: SC-23 (5); NIST SP 800-53 Rev 5: SC-23 (5)) | ||||||||||||||||||||||||||||||||||||
| Description: | To ensure users do not experience denial of service when performing certificate-based authentication to DoW websites due to the system chaining to a root other than DoW Root CAs, the US DoW CCEB Interoperability Root CA cross-certificates must be installed in the Untrusted Certificate Store. This requirement only applies to unclassified systems. Satisfies: SRG-OS-000066-GPOS-00034, SRG-OS-000403-GPOS-00182 | ||||||||||||||||||||||||||||||||||||
| Check Text: | This is applicable to unclassified systems. It is not applicable for others. Open "PowerShell" as an administrator. Execute the following command: Get-ChildItem -Path Cert:Localmachine\disallowed | Where Issuer -Like "*CCEB Interoperability*" | FL Subject, NotAfter If valid (and unexpired) US DoW CCEB Interoperability Root CA certificates (such as those below) are not displayed, this is a finding. Note: The Common Names (CN) below are examples. Verify the "CN" displayed is a DoW CCEB Interoperability Root CA and is not expired. Subject: CN= US DoD CCEB Interoperability Root CA 2, OU=PKI, OU=DoD, O=U.S. Government, C=US NotAfter: 12/30/2030 Alternately, use the Certificates MMC snap-in: Run "MMC". Select "File", "Add/Remove Snap-in". Select "Certificates" and click "Add". Select "Computer account" and click "Next". Select "Local computer: (the computer this console is running on)" and click "Finish". Click "OK". Expand "Certificates" and navigate to Untrusted Certificates >> Certificates. For each US DoW CCEB Interoperability Root CA certificate displayed: Right-click the certificate and select "Open". Select the "Details" tab. Verify that the Expiration Date is a future date. Scroll to the bottom and select "Subject". If any of the certificates listed do not include "DoD Interoperability Root CA" in the Subject (CN) name or are expired, this is a finding. US DoD CCEB Interoperability Root CA 2 Note: Interoperability cross-certificates will have a different value (such as "...Root CA 6") in the 'Issued To' field than in the 'Subject' and 'Issuer' fields. | ||||||||||||||||||||||||||||||||||||
| Fix Text: | Install valid and unexpired US DoW CCEB Interoperability Root CA cross-certificate on unclassified systems. The list below is not to be treated as exhaustive. The STIG should not be used as a definitive resource for the organizationally approved certificates for the systems. US DOD CCEB Interoperability Root CA 2 Administrators must run the Federal Bridge Certification Authority (FBCA) Cross-Certificate Removal Tool once as an administrator and once as the current user. The FBCA Cross-Certificate Remover Tool and User Guide are available on Cyber Exchange at https://cyber.mil/pki-pke/tools-configuration-files. Certificate bundles published by the PKI can be found at https://crl.gds.disa.mil/. | ||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278195 - Windows Server 2025 must have the built-in guest account disabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278195r1181291_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000010 | ||||||||||||||||||||||||
| Identities: | CCI-000804 (NIST SP 800-53: IA-8; NIST SP 800-53A: IA-8.1; NIST SP 800-53 Rev 4: IA-8; NIST SP 800-53 Rev 5: IA-8) | ||||||||||||||||||||||||
| Description: | A system faces an increased vulnerability threat if the built-in guest account is not disabled. This is a known account that exists on all Windows systems and cannot be deleted. This account is initialized during the installation of the operating system with no password assigned. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Guest account status" is not set to "Disabled", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "EnableGuestAccount" equals "1" in the file, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Accounts: Guest account status to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278197 - The Windows Server 2025 built-in administrator account must be renamed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278197r1182315_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-SO-000030 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | The built-in administrator account is a well-known account subject to attack. Renaming this account to an unidentified name improves the protection of this account and the system. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems; it is not applicable for domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Rename administrator account" is not set to a value other than "Administrator", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "NewAdministratorName" is not something other than "Administrator" in the file, this is a finding. | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Accounts: Rename administrator account to a name other than "Administrator". | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278198 - The Windows Server 2025 built-in guest account must be renamed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278198r1182317_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-SO-000040 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | The built-in guest account is a well-known user account on all Windows systems and, as initially installed, does not require a password. This can allow access to system resources by unauthorized users. Renaming this account to an unidentified name improves the protection of this account and the system. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems; it is not applicable for domain controllers. Verify the effective setting in Local Group Policy Editor. Run "gpedit.msc". Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options. If the value for "Accounts: Rename guest account" is not set to a value other than "Guest", this is a finding. For server core installations, run the following command: Secedit /Export /Areas SecurityPolicy /CFG C:\Path\FileName.Txt If "NewGuestName" is not something other than "Guest" in the file, this is a finding. | ||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Accounts: Rename guest account to a name other than "Guest". | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278199 - Windows Server 2025 must force audit policy subcategory settings to override audit policy category settings.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278199r1181303_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000050 | ||||||||||||||||||||||||
| Identities: | CCI-000169 (NIST SP 800-53: AU-12 a; NIST SP 800-53A: AU-12.1 (ii); NIST SP 800-53 Rev 4: AU-12 a; NIST SP 800-53 Rev 5: AU-12 a) | ||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, and analyze compromises that have occurred, as well as detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. This setting allows administrators to enable more precise auditing capabilities. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: SCENoApplyLegacyAuditPolicy Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Audit: Force audit policy subcategory settings (Windows 7 or later) to override audit policy category settings to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278200 - The Windows Server 2025 setting Domain member: Digitally encrypt or sign secure channel data (always) must be configured to Enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278200r1181306_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000060 | ||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted and signed. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RequireSignOrSeal Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Digitally encrypt or sign secure channel data (always) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278201 - Windows Server 2025 setting Domain member: Digitally encrypt secure channel data (when possible) must be configured to Enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278201r1181309_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000070 | ||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but not all information is encrypted. If this policy is enabled, outgoing secure channel traffic will be encrypted. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: SealSecureChannel Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Digitally encrypt secure channel data (when possible) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278202 - The Windows Server 2025 setting Domain member: Digitally sign secure channel data (when possible) must be configured to Enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278202r1181312_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000080 | ||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | Requests sent on the secure channel are authenticated, and sensitive information (such as passwords) is encrypted, but the channel is not integrity checked. If this policy is enabled, outgoing secure channel traffic will be signed. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: SignSecureChannel Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Digitally sign secure channel data (when possible) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278203 - Windows Server 2025 computer account password must not be prevented from being reset.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278203r1181315_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000090 | ||||||||||||||||||||||||
| Identities: | CCI-001967 (NIST SP 800-53 Rev 4: IA-3 (1); NIST SP 800-53 Rev 5: IA-3 (1)) | ||||||||||||||||||||||||
| Description: | Computer account passwords are changed automatically on a regular basis. Disabling automatic password changes can make the system more vulnerable to malicious access. Frequent password changes can be a significant safeguard for the system. A new password for the computer account will be generated every 30 days. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: DisablePasswordChange Value Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Disable machine account password changes to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278204 - Windows Server 2025 maximum age for machine account passwords must be configured to 30 days or less.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278204r1182319_rule | ||||||||||
| Test Type: | Automated | ||||||||||
| Rule Applicability: | Windows_StandaloneServer | ||||||||||
| Rule Applicability: | Windows_MemberServer | ||||||||||
| Rule Result: | Not Applicable | ||||||||||
| Version: | WN25-SO-000100 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | Computer account passwords are changed automatically on a regular basis. This setting controls the maximum password age that a machine account may have. This must be set to no more than 30 days, ensuring the machine changes its password monthly. | ||||||||||
| Check Text: | This applies to member servers and stand-alone or nondomain-joined systems; it is not applicable for domain controllers. This is the default configuration for this setting (30 days). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: MaximumPasswordAge Value Type: REG_DWORD Value: 0x0000001e (30) (or less, but not 0) | ||||||||||
| Fix Text: | This is the default configuration for this setting (30 days). Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Maximum machine account password age to "30" or less (excluding "0", which is unacceptable). | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
|
V-278205 - Windows Server 2025 must be configured to require a strong session key.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278205r1181321_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000110 | ||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | A computer connecting to a domain controller will establish a secure channel. The secure channel connection may be subject to compromise, such as hijacking or eavesdropping, if strong session keys are not used to establish the connection. Requiring strong session keys enforces 128-bit encryption between systems. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\ Value Name: RequireStrongKey Value Type: REG_DWORD Value: 0x00000001 (1) This setting may prevent a system from being joined to a domain if not configured consistently between systems. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Domain member: Require strong (Windows 2000 or Later) session key to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278206 - Windows Server 2025 machine inactivity limit must be set to 15 minutes or less, locking the system with the screen saver.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278206r1181324_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||
| Version: | WN25-SO-000120 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000056 (NIST SP 800-53: AC-11 b; NIST SP 800-53A: AC-11.1 (iii); NIST SP 800-53 Rev 4: AC-11 b; NIST SP 800-53 Rev 5: AC-11 b) CCI-000057 (NIST SP 800-53: AC-11 a; NIST SP 800-53A: AC-11.1 (ii); NIST SP 800-53 Rev 4: AC-11 a; NIST SP 800-53 Rev 5: AC-11 a) CCI-000060 (NIST SP 800-53: AC-11 (1); NIST SP 800-53A: AC-11 (1).1; NIST SP 800-53 Rev 4: AC-11 (1); NIST SP 800-53 Rev 5: AC-11 (1)) | ||||||||||||||||||||||||||||||||
| Description: | Unattended systems are susceptible to unauthorized use and must be locked when unattended. The screen saver must be set at a maximum of 15 minutes and be password protected. This protects critical and sensitive data from exposure to unauthorized personnel with physical access to the computer. Satisfies: SRG-OS-000028-GPOS-00009, SRG-OS-000029-GPOS-00010, SRG-OS-000031-GPOS-00012 | ||||||||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: InactivityTimeoutSecs Value Type: REG_DWORD Value: 0x00000384 (900) (or less, excluding "0" which is effectively disabled) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Interactive logon: Machine inactivity limit to "900" seconds or less, excluding "0", which is effectively disabled. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278207 - The Windows Server 2025 required legal notice must be configured to display before console logon.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278207r1181327_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-SO-000130 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000048 (NIST SP 800-53: AC-8 a; NIST SP 800-53A: AC-8.1 (ii); NIST SP 800-53 Rev 4: AC-8 a; NIST SP 800-53 Rev 5: AC-8 a) CCI-000050 (NIST SP 800-53: AC-8 b; NIST SP 800-53A: AC-8.1 (iii); NIST SP 800-53 Rev 4: AC-8 b; NIST SP 800-53 Rev 5: AC-8 b) CCI-001384 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (i); NIST SP 800-53 Rev 4: AC-8 c 1; NIST SP 800-53 Rev 5: AC-8 c 1) CCI-001385 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001386 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001387 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001388 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (iii); NIST SP 800-53 Rev 4: AC-8 c 3; NIST SP 800-53 Rev 5: AC-8 c 3) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Failure to display the logon banner prior to a logon attempt will negate legal proceedings resulting from unauthorized access to system resources. Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000024-GPOS-00007, SRG-OS-000228-GPOS-00088 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LegalNoticeText Value Type: REG_SZ Value: See message text below You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Interactive Logon: Message text for users attempting to log on to the following: You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions: -The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations. -At any time, the USG may inspect and seize data stored on this IS. -Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose. -This IS includes security measures (e.g., authentication and access controls) to protect USG interests--not for your personal benefit or privacy. -Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278209 - The Windows Server 2025 Smart Card removal option must be configured to Force Logoff or Lock Workstation.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278209r1181333_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-SO-000150 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||
| Description: | Unattended systems are susceptible to unauthorized use and must be locked. Configuring a system to lock when a smart card is removed will ensure the system is inaccessible when unattended. | ||||||||||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\ Value Name: scremoveoption Value Type: REG_SZ Value: 1 (Lock Workstation) or 2 (Force Logoff) If configuring this on servers causes issues, such as terminating users' remote sessions, and the organization has a policy in place that any other sessions on the servers, such as administrative console logons, are manually locked or logged off when unattended or not in use, this would be acceptable. This must be documented with the information system security officer (ISSO). | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Interactive logon: Smart card removal behavior to "Lock Workstation" or "Force Logoff". | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278210 - The Windows Server 2025 setting Microsoft network client: Digitally sign communications (always) must be configured to Enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278210r1181336_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000160 | ||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB client will only communicate with an SMB server that performs SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: RequireSecuritySignature Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft network client: Digitally sign communications (always) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278211 - The Windows Server 2025 setting Microsoft network client: Digitally sign communications (if server agrees) must be configured to Enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278211r1181339_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000170 | ||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | The server message block (SMB) protocol provides the basis for many network operations. If this policy is enabled, the SMB client will request packet signing when communicating with an SMB server that is enabled or required to perform SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value Name: EnableSecuritySignature Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft network client: Digitally sign communications (if server agrees) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278212 - Windows Server 2025 unencrypted passwords must not be sent to third-party Server Message Block (SMB) servers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278212r1181342_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000180 | ||||||||||||||||||||||||
| Identities: | CCI-000197 (NIST SP 800-53: IA-5 (1) (c); NIST SP 800-53A: IA-5 (1).1 (v); NIST SP 800-53 Rev 4: IA-5 (1) (c); NIST SP 800-53 Rev 5: IA-5 (1) (c)) | ||||||||||||||||||||||||
| Description: | Some non-Microsoft SMB servers only support unencrypted (plain-text) password authentication. Sending plain-text passwords across the network when authenticating to an SMB server reduces the overall security of the environment. Check with the vendor of the SMB server to determine if there is a way to support encrypted password authentication. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry HiveHKEY_LOCAL_MACHINE Registry Path\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\ Value NameEnablePlainTextPassword Value TypeREG_DWORD Value0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft Network Client: Send unencrypted password to third-party SMB servers to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278213 - The Windows Server 2025 setting Microsoft network server: Digitally sign communications (always) must be configured to Enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278213r1181345_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000190 | ||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB server will only communicate with an SMB client that performs SMB packet signing. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: RequireSecuritySignature Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft network server: Digitally sign communications (always) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278214 - The Windows Server 2025 setting Microsoft network server: Digitally sign communications (if client agrees) must be configured to Enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278214r1181348_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000200 | ||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | The server message block (SMB) protocol provides the basis for many network operations. Digitally signed SMB packets aid in preventing man-in-the-middle attacks. If this policy is enabled, the SMB server will negotiate SMB packet signing as requested by the client. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188 | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LanManServer\Parameters\ Value Name: EnableSecuritySignature Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Microsoft network server: Digitally sign communications (if client agrees) to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278218 - Windows Server 2025 must be configured to prevent anonymous users from having the same permissions as the Everyone group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278218r1181360_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000240 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Access by anonymous users must be restricted. If this setting is enabled, anonymous users have the same rights and permissions as the built-in Everyone group. Anonymous users must not have these permissions or rights. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\ Value Name: EveryoneIncludesAnonymous Value Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network access: Let Everyone permissions apply to anonymous users to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278220 - Windows Server 2025 services using Local System that use Negotiate when reverting to NTLM authentication must use the computer identity instead of authenticating anonymously.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278220r1181366_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000260 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Services using Local System that use Negotiate when reverting to NTLM authentication may gain unauthorized access if allowed to authenticate anonymously versus using the computer identity. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\LSA\ Value Name: UseMachineId Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Allow Local System to use computer identity for NTLM to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278221 - Windows Server 2025 must prevent NTLM from falling back to a Null session.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278221r1181369_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000270 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | NTLM sessions that are allowed to fall back to Null (unauthenticated) sessions may gain unauthorized access. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\LSA\MSV1_0\ Value Name: allownullsessionfallback Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Allow LocalSystem NULL session fallback to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278222 - Windows Server 2025 must prevent PKU2U authentication using online identities.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278222r1181372_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000280 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | PKU2U is a peer-to-peer authentication protocol. This setting prevents online identities from authenticating to domain-joined systems. Authentication will be centrally managed with Windows user accounts. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\LSA\pku2u\ Value Name: AllowOnlineID Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Allow PKU2U authentication requests to this computer to use online identities to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278223 - Windows Server 2025 Kerberos encryption types must be configured to prevent the use of DES and RC4 encryption suites.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278223r1181375_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000290 | ||||||||||||||||||||||||
| Identities: | CCI-000803 (NIST SP 800-53: IA-7; NIST SP 800-53A: IA-7.1; NIST SP 800-53 Rev 4: IA-7; NIST SP 800-53 Rev 5: IA-7) | ||||||||||||||||||||||||
| Description: | Certain encryption types are no longer considered secure. The DES and RC4 encryption suites must not be used for Kerberos encryption. Note: Organizations with domain controllers running earlier versions of Windows where RC4 encryption is enabled, which select "The other domain supports Kerberos AES Encryption" on domain trusts, may be required to allow client communication across the trust relationship. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\Kerberos\Parameters\ Value Name: SupportedEncryptionTypes Value Type: REG_DWORD Value: 0x7ffffff8 (2147483640) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Configure encryption types allowed for Kerberos to "Enabled" with only the following selected: AES128_HMAC_SHA1 AES256_HMAC_SHA1 Future encryption types Note: Organizations with domain controllers running earlier versions of Windows where RC4 encryption is enabled, which select "The other domain supports Kerberos AES Encryption" on domain trusts, may be required to allow client communication across the trust relationship. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278226 - Windows Server 2025 must be configured to at least negotiate signing for LDAP client signing.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278226r1181384_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-SO-000320 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||
| Description: | This setting controls the signing requirements for LDAP clients. This must be set to "Negotiate signing" or "Require signing", depending on the environment and type of LDAP server in use. | ||||||||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\LDAP\ Value Name: LDAPClientIntegrity Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: LDAP client signing requirements to "Negotiate signing" at a minimum. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278227 - Windows Server 2025 session security for NTLM SSP-based clients must be configured to require NTLMv2 session security and 128-bit encryption.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278227r1181387_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-SO-000330 | ||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||
| Description: | Microsoft has implemented a variety of security support providers for use with Remote Procedure Call (RPC) sessions. All of the options must be enabled to ensure the maximum security level. | ||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\ Value Name: NTLMMinClientSec Value Type: REG_DWORD Value: 0x20080000 (537395200) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Minimum session security for NTLM SSP based (including secure RPC) clients to "Require NTLMv2 session security" and "Require 128-bit encryption" (all options selected). | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278228 - Windows Server 2025 session security for NTLM SSP-based servers must be configured to require NTLMv2 session security and 128-bit encryption.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278228r1181390_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-SO-000340 | ||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||
| Description: | Microsoft has implemented a variety of security support providers for use with Remote Procedure Call (RPC) sessions. All of the options must be enabled to ensure the maximum security level. | ||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0\ Value Name: NTLMMinServerSec Value Type: REG_DWORD Value: 0x20080000 (537395200) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Network security: Minimum session security for NTLM SSP based (including secure RPC) servers to "Require NTLMv2 session security" and "Require 128-bit encryption" (all options selected). | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278229 - Windows Server 2025 users must be required to enter a password to access private keys stored on the computer.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278229r1181393_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000350 | ||||||||||||||||||||||||
| Identities: | CCI-000186 (NIST SP 800-53: IA-5 (2); NIST SP 800-53A: IA-5 (2).1; NIST SP 800-53 Rev 4: IA-5 (2) (b); NIST SP 800-53 Rev 5: IA-5 (2) (a) (1)) | ||||||||||||||||||||||||
| Description: | If the private key is discovered, an attacker can use the key to authenticate as an authorized user and gain access to the network infrastructure. The cornerstone of the PKI is the private key used to encrypt or digitally sign information. If the private key is stolen, this will lead to the compromise of the authentication and nonrepudiation gained through PKI because the attacker can use the private key to digitally sign documents and pretend to be the authorized user. Both the holders of a digital certificate and the issuing authority must protect the computers, storage devices, or whatever they use to keep the private keys. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Cryptography\ Value Name: ForceKeyProtection Type: REG_DWORD Value: 0x00000002 (2) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> System cryptography: Force strong key protection for user keys stored on the computer to "User must enter a password each time they use a key". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278230 - Windows Server 2025 must be configured to use FIPS-compliant algorithms for encryption, hashing, and signing.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278230r1181396_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-SO-000360 | ||||||||||||||||||||||||||
| Identities: | CCI-002450 (NIST SP 800-53 Rev 4: SC-13; NIST SP 800-53 Rev 5: SC-13 b) | ||||||||||||||||||||||||||
| Description: | This setting ensures the system uses FIPS-compliant algorithms for encryption, hashing, and signing. FIPS-compliant algorithms meet specific standards established by the U.S. Government and must be the algorithms used for all OS encryption functions. | ||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\ Value Name: Enabled Value Type: REG_DWORD Value: 0x00000001 (1) Clients with this setting enabled will not be able to communicate via digitally encrypted or signed protocols with servers that do not support these algorithms. Both the browser and web server must be configured to use TLS; otherwise, the browser will not be able to connect to a secure site. | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing to "Enabled". | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278232 - Windows Server 2025 User Account Control (UAC) approval mode for the built-in Administrator must be enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278232r1182191_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SO-000380 | ||||||||||||||||||||||||
| Identities: | CCI-004895 (NIST SP 800-53 Rev 5: SC-11 b) | ||||||||||||||||||||||||
| Description: | UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the built-in Administrator account so that it runs in Admin Approval Mode. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157 | ||||||||||||||||||||||||
| Check Text: | UAC requirements are not applicable for Server Core installations (this is the default installation option for Windows Server 2025 versus Server with Desktop Experience). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: FilterAdministratorToken Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Admin Approval Mode for the Built-in Administrator account to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278233 - Windows Server 2025 UIAccess applications must not be allowed to prompt for elevation without using the secure desktop.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278233r1182193_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000390 | ||||||||||||||||||||||||
| Identities: | CCI-001084 (NIST SP 800-53: SC-3; NIST SP 800-53A: SC-3.1 (ii); NIST SP 800-53 Rev 4: SC-3; NIST SP 800-53 Rev 5: SC-3) | ||||||||||||||||||||||||
| Description: | User Account Control (UAC) is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting prevents User Interface Accessibility programs from disabling the secure desktop for elevation prompts. | ||||||||||||||||||||||||
| Check Text: | UAC requirements are not applicable for Server Core installations (this is the default installation option for Windows Server 2025 versus Server with Desktop Experience). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableUIADesktopToggle Value Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Allow UIAccess applications to prompt for elevation without using the secure desktop to "Disabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278234 - Windows Server 2025 User Account Control (UAC) must, at a minimum, prompt administrators for consent on the secure desktop.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278234r1182195_rule | ||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||
| Version: | WN25-SO-000400 | ||||||||||||||||||||||||||||||||||
| Identities: | CCI-001084 (NIST SP 800-53: SC-3; NIST SP 800-53A: SC-3.1 (ii); NIST SP 800-53 Rev 4: SC-3; NIST SP 800-53 Rev 5: SC-3) | ||||||||||||||||||||||||||||||||||
| Description: | UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures the elevation requirements for logged-on administrators to complete a task that requires raised privileges. | ||||||||||||||||||||||||||||||||||
| Check Text: | UAC requirements are not applicable for Server Core installations (this is the default installation option for Windows Server 2025 versus Server with Desktop Experience). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ConsentPromptBehaviorAdmin Value Type: REG_DWORD Value: 0x00000002 (2) (Prompt for consent on the secure desktop) 0x00000001 (1) (Prompt for credentials on the secure desktop) | ||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode to "Prompt for consent on the secure desktop". The more secure option for this setting, "Prompt for credentials on the secure desktop", would also be acceptable. | ||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278235 - Windows Server 2025 User Account Control (UAC) must automatically deny standard user requests for elevation.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278235r1182197_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-SO-000410 | ||||||||||||||||||||||||||
| Identities: | CCI-004895 (NIST SP 800-53 Rev 5: SC-11 b) | ||||||||||||||||||||||||||
| Description: | UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting controls the behavior of elevation when requested by a standard user account. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157 | ||||||||||||||||||||||||||
| Check Text: | UAC requirements are not applicable for Server Core installations (this is the default installation option for Windows Server 2025 versus Server with Desktop Experience). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: ConsentPromptBehaviorUser Value Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Behavior of the elevation prompt for standard users to "Automatically deny elevation requests". | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278236 - Windows Server 2025 User Account Control (UAC) must be configured to detect application installations and prompt for elevation.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278236r1182199_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000420 | ||||||||||||||||||||||||
| Identities: | CCI-001084 (NIST SP 800-53: SC-3; NIST SP 800-53A: SC-3.1 (ii); NIST SP 800-53 Rev 4: SC-3; NIST SP 800-53 Rev 5: SC-3) | ||||||||||||||||||||||||
| Description: | UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting requires Windows to respond to application installation requests by prompting for credentials. | ||||||||||||||||||||||||
| Check Text: | UAC requirements are not applicable for Server Core installations (this is the default installation option for Windows Server 2025 versus Server with Desktop Experience). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableInstallerDetection Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Detect application installations and prompt for elevation to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278237 - Windows Server 2025 User Account Control (UAC) must only elevate UIAccess applications that are installed in secure locations.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278237r1182201_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000430 | ||||||||||||||||||||||||
| Identities: | CCI-001084 (NIST SP 800-53: SC-3; NIST SP 800-53A: SC-3.1 (ii); NIST SP 800-53 Rev 4: SC-3; NIST SP 800-53 Rev 5: SC-3) | ||||||||||||||||||||||||
| Description: | UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures Windows to only allow applications installed in a secure location on the file system, such as the Program Files or the Windows\System32 folders, to run with elevated privileges. | ||||||||||||||||||||||||
| Check Text: | UAC requirements are not applicable for Server Core installations (this is the default installation option for Windows Server 2025 versus Server with Desktop Experience). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableSecureUIAPaths Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Only elevate UIAccess applications that are installed in secure locations to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278238 - Windows Server 2025 User Account Control (UAC) must run all administrators in Admin Approval Mode, enabling UAC.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278238r1182203_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000440 | ||||||||||||||||||||||||
| Identities: | CCI-004895 (NIST SP 800-53 Rev 5: SC-11 b) | ||||||||||||||||||||||||
| Description: | UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting enables UAC. Satisfies: SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157 | ||||||||||||||||||||||||
| Check Text: | UAC requirements are not applicable for Server Core installations (this is the default installation option for Windows Server 2025 versus Server with Desktop Experience). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableLUA Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Run all administrators in Admin Approval Mode to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278239 - Windows Server 2025 User Account Control (UAC) must virtualize file and registry write failures to per-user locations.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278239r1182205_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_NotServerCore | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000450 | ||||||||||||||||||||||||
| Identities: | CCI-001084 (NIST SP 800-53: SC-3; NIST SP 800-53A: SC-3.1 (ii); NIST SP 800-53 Rev 4: SC-3; NIST SP 800-53 Rev 5: SC-3) | ||||||||||||||||||||||||
| Description: | UAC is a security mechanism for limiting the elevation of privileges, including administrative accounts, unless authorized. This setting configures non-UAC-compliant applications to run in virtualized file and registry entries in per-user locations, allowing them to run. | ||||||||||||||||||||||||
| Check Text: | UAC requirements are not applicable for Server Core installations (this is the default installation option for Windows Server 2025 versus Server with Desktop Experience). If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: EnableVirtualization Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> User Account Control: Virtualize file and registry write failures to per-user locations to "Enabled". | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278240 - Windows Server 2025 must preserve zone information when saving attachments.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278240r1182207_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-UC-000010 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Attachments from outside sources may contain malicious code. Preserving zone of origin (internet, intranet, local, restricted) information on file attachments allows Windows to determine risk. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | The default behavior is for Windows to mark file attachments with their zone information. If the registry Value Name below does not exist, this is not a finding. If it exists and is configured with a value of "2", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_CURRENT_USER Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Attachments\ Value Name: SaveZoneInformation Value Type: REG_DWORD Value: 0x00000002 (2) (or if the Value Name does not exist) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | The default behavior is for Windows to mark file attachments with their zone information. To correct this, configure the policy value for User Configuration >> Administrative Templates >> Windows Components >> Attachment Manager >> Do not preserve zone information in file attachments to "Not Configured" or "Disabled". | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278241 - The Windows Server 2025 "Access Credential Manager as a trusted caller" user right must not be assigned to any groups or accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278241r1182208_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-UR-000010 | ||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Access Credential Manager as a trusted caller" user right may be able to retrieve the credentials of other accounts from Credential Manager. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Access Credential Manager as a trusted caller" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeTrustedCredManAccessPrivilege" user right, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Access Credential Manager as a trusted caller to be defined but containing no entries (blank). | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278243 - The Windows Server 2025 "Allow log on locally" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278243r1182210_rule | ||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000030 | ||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Allow log on locally" user right can log on interactively to a system. | ||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Allow log on locally" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeInteractiveLogonRight" user right, this is a finding: S-1-5-32-544 (Administrators) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Allow log on locally to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278244 - The Windows Server 2025 "Back up files and directories" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278244r1182211_rule | ||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000040 | ||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Back up files and directories" user right can circumvent file and directory permissions and could allow access to sensitive data. | ||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Back up files and directories" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeBackupPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Back up files and directories to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278245 - The Windows Server 2025 "Create a pagefile" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278245r1182212_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000050 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Create a pagefile" user right can change the size of a pagefile, which could affect system performance. | ||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Create a pagefile" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeCreatePagefilePrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create a pagefile to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278247 - The Windows Server 2025 "Create global objects" user right must only be assigned to Administrators, Service, Local Service, and Network Service.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278247r1182214_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000070 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Create global objects" user right can create objects that are available to all sessions, which could affect processes in other users' sessions. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Create global objects" user right, this is a finding: - Administrators. - Service. - Local Service. - Network Service. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeCreateGlobalPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) S-1-5-6 (Service) S-1-5-19 (Local Service) S-1-5-20 (Network Service) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create global objects to include only the following accounts or groups: - Administrators. - Service. - Local Service. - Network Service. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278248 - The Windows Server 2025 "Create permanent shared objects" user right must not be assigned to any groups or accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278248r1182215_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-UR-000080 | ||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Create permanent shared objects" user right could expose sensitive data by creating shared objects. | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Create permanent shared objects" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeCreatePermanentPrivilege" user right, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create permanent shared objects to be defined but containing no entries (blank). | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278249 - The Windows Server 2025 "Create symbolic links" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278249r1182217_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000090 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Create symbolic links" user right can create pointers to other objects, which could expose the system to attack. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Create symbolic links" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeCreateSymbolicLinkPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) Systems that have the Hyper-V role will also have "Virtual Machines" given this user right (this may be displayed as "NT Virtual Machine\Virtual Machines", SID S-1-5-83-0). This is not a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Create symbolic links to include only the following accounts or groups: - Administrators. Systems that have the Hyper-V role will also have "Virtual Machines" given this user right. To add this manually, enter it as "NT Virtual Machine\Virtual Machines". | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278251 - The Windows Server 2025 "Force shutdown from a remote system" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278251r1182219_rule | ||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000110 | ||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Force shutdown from a remote system" user right can remotely shut down a system, which could result in a denial of service. | ||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Force shutdown from a remote system" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeRemoteShutdownPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Force shutdown from a remote system to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278252 - The Windows Server 2025 "Generate security audits" user right must only be assigned to Local Service and Network Service.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278252r1182220_rule | ||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000120 | ||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Generate security audits" user right specifies users and processes that can generate Security Log audit records, which must only be the system service accounts defined. | ||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Generate security audits" user right, this is a finding: - Local Service. - Network Service. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeAuditPrivilege" user right, this is a finding: S-1-5-19 (Local Service) S-1-5-20 (Network Service) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Generate security audits to include only the following accounts or groups: - Local Service. - Network Service. | ||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278253 - The Windows Server 2025 "Impersonate a client after authentication" user right must only be assigned to Administrators, Service, Local Service, and Network Service.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278253r1182221_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000130 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Impersonate a client after authentication" user right allows a program to impersonate another user or account to run on their behalf. An attacker could use this to elevate privileges. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Impersonate a client after authentication" user right, this is a finding: - Administrators. - Service. - Local Service. - Network Service. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeImpersonatePrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) S-1-5-6 (Service) S-1-5-19 (Local Service) S-1-5-20 (Network Service) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Impersonate a client after authentication to include only the following accounts or groups: - Administrators. - Service. - Local Service. - Network Service. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278254 - The Windows Server 2025 "Increase scheduling priority" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278254r1182222_rule | ||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000140 | ||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Increase scheduling priority" user right can change a scheduling priority, causing performance issues or a denial of service. | ||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Increase scheduling priority" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeIncreaseBasePriorityPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Increase scheduling priority to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278255 - The Windows Server 2025 "Load and unload device drivers" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278255r1182223_rule | ||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000150 | ||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Load and unload device drivers" user right allows a user to load device drivers dynamically on a system. This could be used by an attacker to install malicious code. | ||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Load and unload device drivers" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeLoadDriverPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Load and unload device drivers to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278256 - The Windows Server 2025 "Lock pages in memory" user right must not be assigned to any groups or accounts.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278256r1182224_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-UR-000160 | ||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) CCI-002824 (NIST SP 800-53 Rev 4: SI-16; NIST SP 800-53 Rev 5: SI-16) | ||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. The "Lock pages in memory" user right allows physical memory to be assigned to processes, which could cause performance issues or a denial of service. Satisfies: SRG-OS-000324-GPOS-00125, SRG-OS-000433-GPOS-00193 | ||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups are granted the "Lock pages in memory" user right, this is a finding. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs are granted the "SeLockMemoryPrivilege" user right, this is a finding. If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Lock pages in memory to be defined but containing no entries (blank). | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278257 - The Windows Server 2025 "Manage auditing and security log" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278257r1182225_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000170 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-000162 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000163 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000164 (NIST SP 800-53: AU-9; NIST SP 800-53A: AU-9.1; NIST SP 800-53 Rev 4: AU-9; NIST SP 800-53 Rev 5: AU-9 a) CCI-000171 (NIST SP 800-53: AU-12 b; NIST SP 800-53A: AU-12.1 (iii); NIST SP 800-53 Rev 4: AU-12 b; NIST SP 800-53 Rev 5: AU-12 b) CCI-001914 (NIST SP 800-53 Rev 4: AU-12 (3); NIST SP 800-53 Rev 5: AU-12 (3)) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Manage auditing and security log" user right can manage the security log and change auditing configurations. This could be used to clear evidence of tampering. Satisfies: SRG-OS-000057-GPOS-00027, SRG-OS-000058-GPOS-00028, SRG-OS-000059-GPOS-00029, SRG-OS-000063-GPOS-00032, SRG-OS-000337-GPOS-00129 | ||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Manage auditing and security log" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeSecurityPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) If the organization has an Auditors group, the assignment of this group the assignment of this group to the user right is not a finding. If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Manage auditing and security log to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278258 - The Windows Server 2025 "Modify firmware environment values" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278258r1182226_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000180 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Modify firmware environment values" user right can change hardware configuration environment variables. This could result in hardware failures or a denial of service. | ||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Modify firmware environment values" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeSystemEnvironmentPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Modify firmware environment values to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278259 - The Windows Server 2025 "Perform volume maintenance tasks" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278259r1182227_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000190 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Perform volume maintenance tasks" user right can manage volume and disk configurations. This could be used to delete volumes, resulting in data loss or a denial of service. | ||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Perform volume maintenance tasks" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeManageVolumePrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Perform volume maintenance tasks to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278260 - The Windows Server 2025 "Profile single process" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278260r1182228_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000200 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Profile single process" user right can monitor nonsystem processes performance. An attacker could use this to identify processes to attack. | ||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Profile single process" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeProfileSingleProcessPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Profile single process to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-278261 - The Windows Server 2025 "Restore files and directories" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278261r1182229_rule | ||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000210 | ||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Restore files and directories" user right can circumvent file and directory permissions and could allow access to sensitive data. It could also be used to overwrite more current data. | ||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Restore files and directories" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeRestorePrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Restore files and directories to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278262 - The Windows Server 2025 "Take ownership of files or other objects" user right must only be assigned to the Administrators group.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278262r1182230_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||||||||||
| Version: | WN25-UR-000220 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-002235 (NIST SP 800-53 Rev 4: AC-6 (10); NIST SP 800-53 Rev 5: AC-6 (10)) | ||||||||||||||||||||||||||||||||
| Description: | Inappropriately granting user rights provides system, administrative, and other high-level capabilities. Accounts with the "Take ownership of files or other objects" user right can take ownership of objects and make changes. | ||||||||||||||||||||||||||||||||
| Check Text: | Verify the effective setting in Local Group Policy Editor. Run gpedit.msc. Navigate to Local Computer Policy >> Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment. If any accounts or groups other than the following are granted the "Take ownership of files or other objects" user right, this is a finding: - Administrators. For server core installations, run the following command: Secedit /Export /Areas User_Rights /cfg c:\path\filename.txt Review the text file. If any SIDs other than the following are granted the "SeTakeOwnershipPrivilege" user right, this is a finding: S-1-5-32-544 (Administrators) If an application requires this user right, this is not a finding. Vendor documentation must support the requirement for having the user right. The requirement must be documented with the information system security officer (ISSO). The application account must meet requirements for application account passwords, such as length (WN25-00-000050) and required frequency of changes (WN25-00-000060). | ||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> User Rights Assignment >> Take ownership of files or other objects to include only the following accounts or groups: - Administrators. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-279918 - Windows Server 2025 must be configured to audit handle manipulation failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-279918r1181960_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000583 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, analyze compromises that have occurred, and detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential validation records events related to validation tests on credentials for a user account logon. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify Audit Handle Manipulation auditing is enabled: Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Handle Manipulation. If "Audit Handle Manipulation" is not set to "Failure", this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Handle Manipulation" with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-279920 - Windows Server 2025 must be configured to audit registry failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-279920r1181966_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000585 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, analyze compromises that have occurred, and detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential validation records events related to validation tests on credentials for a user account logon. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify Audit Registry auditing is enabled: Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Registry. If "Audit Registry" is not set to "Failure", this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Registry" with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-279921 - Windows Server 2025 must be configured to audit registry successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-279921r1181969_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000586 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, analyze compromises that have occurred, and detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential validation records events related to validation tests on credentials for a user account logon. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify Audit Registry auditing is enabled: Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> Audit Registry. If "Audit Registry" is not set to "Success", this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Object Access >> "Audit Registry" with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-279922 - Windows Server 2025 must be configured to audit sensitive privilege use successes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-279922r1181972_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000587 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, analyze compromises that have occurred, and detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential validation records events related to validation tests on credentials for a user account logon. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify Audit Sensitive Privilege Use auditing is enabled: Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> Audit Sensitive Privilege Use. If "Audit Sensitive Privilege Use" is not set to "Success", this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> Audit Sensitive Privilege Use with "Success" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-279923 - Windows Server 2025 must be configured to audit sensitive privilege use failures.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-279923r1181975_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-AU-000588 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000172 (NIST SP 800-53: AU-12 c; NIST SP 800-53A: AU-12.1 (iv); NIST SP 800-53 Rev 4: AU-12 c; NIST SP 800-53 Rev 5: AU-12 c) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Maintaining an audit trail of system activity logs can help identify configuration errors, troubleshoot service disruptions, analyze compromises that have occurred, and detect attacks. Audit logs are necessary to provide a trail of evidence in case the system or network is compromised. Collecting this data is essential for analyzing the security of information assets and detecting signs of suspicious and unexpected behavior. Credential validation records events related to validation tests on credentials for a user account logon. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | Verify Audit Sensitive Privilege Use auditing is enabled: Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> Audit Sensitive Privilege Use. If "Audit Sensitive Privilege Use" is not set to "Failure", this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Advanced Audit Policy Configuration >> System Audit Policies >> Privilege Use >> Audit Sensitive Privilege Use with "Failure" selected. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-285313 - Windows Server 2025 networked systems must have and implement OpenSSH to protect the confidentiality and integrity of transmitted and received information, as well as information during preparation for transmission.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285313r1211167_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-SH-000010 | ||||||||||||||||||||||||||
| Identities: | CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) CCI-002422 (NIST SP 800-53 Rev 4: SC-8 (2); NIST SP 800-53 Rev 5: SC-8 (2)) | ||||||||||||||||||||||||||
| Description: | Without protection of the transmitted information, confidentiality and integrity may be compromised because unprotected communications can be intercepted and either read or altered. This requirement applies to both internal and external networks and all types of information system components from which information can be transmitted (e.g., servers, mobile devices, notebook computers, printers, copiers, scanners, and facsimile machines). Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, logical means (cryptography) do not have to be employed, and vice versa. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000424-GPOS-00188, SRG-OS-000425-GPOS-00189, SRG-OS-000426-GPOS-00191 | ||||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify that "OpenSSH" is installed with the following command: C:\ > Get-WindowsCapability -Online | Where-Object Name -like 'OpenSSH*' Name : OpenSSH.Client~~~~0.0.1.0 State : Installed Name : OpenSSH.Server~~~~0.0.1.0 State : Installed If installed, verify the service is active with the following command: C:\ > Get-Service sshd Status Name DisplayName ----- ----- ------------- Running sshd OpenSSH SSH Server If OpenSSH is installed and the "sshd" service is not "Running", this is a finding. | ||||||||||||||||||||||||||
| Fix Text: | To install and start the OpenSSH service, run the following commands: C:\ > Add-WindowsCapability -Online -Name OpenSSH.Server~~~~0.0.1.0 C:\ > Start-Service sshd C:\ > Set-Service -Name sshd -StartupType 'Automatic' | ||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-285314 - Windows Server 2025 OpenSSH must display the Standard Mandatory DoW Notice and Consent Banner before granting remote access to the system via an OpenSSH logon.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285314r1256731_rule | ||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||
| Version: | WN25-SH-000020 | ||||||||||||||||||
| Identities: | CCI-000048 (NIST SP 800-53: AC-8 a; NIST SP 800-53A: AC-8.1 (ii); NIST SP 800-53 Rev 4: AC-8 a; NIST SP 800-53 Rev 5: AC-8 a) CCI-001384 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (i); NIST SP 800-53 Rev 4: AC-8 c 1; NIST SP 800-53 Rev 5: AC-8 c 1) CCI-001385 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001386 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001387 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001388 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (iii); NIST SP 800-53 Rev 4: AC-8 c 3; NIST SP 800-53 Rev 5: AC-8 c 3) | ||||||||||||||||||
| Description: | The warning message reinforces policy awareness during the logon process and facilitates possible legal action against attackers. Alternatively, systems whose ownership should not be obvious must ensure usage of a banner that does not provide easy attribution. Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00089 | ||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify any SSH connection to the system displays the Standard Mandatory DoW Notice and Consent Banner before granting access to the system. Check for the location of the banner file being used with the following command: C:\ > Get-Content "$env:ProgramData\ssh\sshd_config" | Select-String -Pattern '^\s*Banner' Banner C:\ProgramData\ssh\Banner.txt If "Banner" is set to "none", the line is commented out, or the line is missing, this is a finding. | ||||||||||||||||||
| Fix Text: | To configure the system, add or modify the following line in the "$env:ProgramData/ssh/sshd_config" file. An example configuration line is: Banner C:\ProgramData\ssh\Banner.txt Restart the OpenSSH service for the settings to take effect. | ||||||||||||||||||
| Severity: | medium | ||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||
| Reference: |
| ||||||||||||||||||
| Definitions: |
| ||||||||||||||||||
| Tests: |
|
V-285315 - Windows Server 2025 OpenSSH must accept public key authentication.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285315r1256733_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SH-000030 | ||||||||||||||||||||||||
| Identities: | CCI-000765 (NIST SP 800-53: IA-2 (1); NIST SP 800-53A: IA-2 (1).1; NIST SP 800-53 Rev 4: IA-2 (1); NIST SP 800-53 Rev 5: IA-2 (1)) CCI-000766 (NIST SP 800-53: IA-2 (2); NIST SP 800-53A: IA-2 (2).1; NIST SP 800-53 Rev 4: IA-2 (2); NIST SP 800-53 Rev 5: IA-2 (2)) CCI-000767 (NIST SP 800-53: IA-2 (3); NIST SP 800-53A: IA-2 (3).1; NIST SP 800-53 Rev 4: IA-2 (3)) CCI-000768 (NIST SP 800-53: IA-2 (4); NIST SP 800-53A: IA-2 (4).1; NIST SP 800-53 Rev 4: IA-2 (4)) | ||||||||||||||||||||||||
| Description: | Without the use of multifactor authentication, the ease of access to privileged functions is greatly increased. Multifactor authentication requires using two or more factors to achieve authentication. A privileged account is defined as an information system account with authorizations of a privileged user. A DoW common access card (CAC) with DoW-approved PKI is an example of multifactor authentication. Satisfies: SRG-OS-000105-GPOS-00052, SRG-OS-000106-GPOS-00053, SRG-OS-000107-GPOS-00054, SRG-OS-000108-GPOS-00056 | ||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. If the system administrator demonstrates the use of an approved alternate multifactor authentication method, this requirement is not applicable. Verify the system accepts public key encryption with the following command: C:\ > Get-Content "$env:ProgramData\ssh\sshd_config" | Select-String -Pattern '^\s*PubkeyAuthentication' PubkeyAuthentication yes If "PubkeyAuthentication" is set to "no", the line is commented out, or the line is missing, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | To configure the system, add or modify the following line in the "$env:ProgramData/ssh/sshd_config" file: PubkeyAuthentication yes Restart the OpenSSH service for the settings to take effect. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-285317 - Windows Server 2025 OpenSSH must force a frequent session key renegotiation for SSH connections to the server.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285317r1211179_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SH-000050 | ||||||||||||||||||||||||
| Identities: | CCI-000068 (NIST SP 800-53: AC-17 (2); NIST SP 800-53A: AC-17 (2).1; NIST SP 800-53 Rev 4: AC-17 (2); NIST SP 800-53 Rev 5: AC-17 (2)) CCI-002418 (NIST SP 800-53 Rev 4: SC-8; NIST SP 800-53 Rev 5: SC-8) CCI-002421 (NIST SP 800-53 Rev 4: SC-8 (1); NIST SP 800-53 Rev 5: SC-8 (1)) | ||||||||||||||||||||||||
| Description: | Without protection of the transmitted information, confidentiality and integrity may be compromised because unprotected communications can be intercepted and either read or altered. This requirement applies to both internal and external networks and all types of information system components from which information can be transmitted (e.g., servers, mobile devices, notebook computers, printers, copiers, scanners, and facsimile machines). Communication paths outside the physical protection of a controlled boundary are exposed to the possibility of interception and modification. Protecting the confidentiality and integrity of organizational information can be accomplished by physical means (e.g., employing physical distribution systems) or by logical means (e.g., employing cryptographic techniques). If physical means of protection are employed, then logical means (cryptography) do not have to be employed, and vice versa. Session key regeneration limits the chances of a session key becoming compromised. Satisfies: SRG-OS-000423-GPOS-00187, SRG-OS-000033-GPOS-00014, SRG-OS-000424-GPOS-00189 | ||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is NA. Verify the OpenSSH server is configured to force frequent session key renegotiation with the following command: C:\ > Get-Content "$env:ProgramData\ssh\sshd_config" | Select-String -Pattern '^\s*RekeyLimit' RekeyLimit 1G 1h If "RekeyLimit" does not have a maximum data amount and maximum time defined, is missing, or is commented out, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | To configure the system, add or modify the following line in the "$env:ProgramData/ssh/sshd_config" file. An example configuration line is: RekeyLimit 1G 1h Restart the OpenSSH service for the settings to take effect. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-285318 - Windows Server 2025 OpenSSH must be configured so that all network connections associated with SSH traffic terminate after becoming unresponsive.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285318r1211182_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SH-000060 | ||||||||||||||||||||||||
| Identities: | CCI-001133 (NIST SP 800-53: SC-10; NIST SP 800-53A: SC-10.1 (ii); NIST SP 800-53 Rev 4: SC-10; NIST SP 800-53 Rev 5: SC-10) CCI-002361 (NIST SP 800-53 Rev 4: AC-12; NIST SP 800-53 Rev 5: AC-12) | ||||||||||||||||||||||||
| Description: | Terminating an unresponsive SSH session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. Quickly terminating an idle SSH session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, deallocating associated TCP/IP address/port pairs at the operating system level and deallocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean the operating system terminates all sessions or network access; it only ends the unresponsive session and releases the resources associated with that session. Windows Server 2025 uses $env:ProgramData/ssh/sshd_config for configurations of OpenSSH. Within the sshd_config, the product of the values of "ClientAliveInterval" and "ClientAliveCountMax" are used to establish the inactivity threshold. The "ClientAliveInterval" is a timeout interval in seconds, after which if no data has been received from the client, sshd will send a message through the encrypted channel to request a response from the client. The "ClientAliveCountMax" is the number of client alive messages that may be sent without sshd receiving any messages back from the client. If this threshold is met, sshd will disconnect the client. For more information on these settings and others, refer to the sshd_config man pages. Satisfies: SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00110 | ||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify the "ClientAliveCountMax" is set to "1" by performing the following command: C:\ > Get-Content "$env:ProgramData\ssh\sshd_config" | Select-String -Pattern '^\s*ClientAliveCountMax' ClientAliveCountMax 1 If "ClientAliveCountMax" does not exist, is not set to a value of "1", or is commented out, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | To configure the system, add or modify the following line in the "$env:ProgramData/ssh/sshd_config" file: ClientAliveCountMax 1 Restart the OpenSSH service for the settings to take effect. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-285319 - Windows Server 2025 OpenSSH must be configured so that all network connections associated with SSH traffic are terminated after 10 minutes of becoming unresponsive.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285319r1212174_rule | ||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||
| Version: | WN25-SH-000070 | ||||||||||||||||||||||||||||||||
| Identities: | CCI-001133 (NIST SP 800-53: SC-10; NIST SP 800-53A: SC-10.1 (ii); NIST SP 800-53 Rev 4: SC-10; NIST SP 800-53 Rev 5: SC-10) CCI-002361 (NIST SP 800-53 Rev 4: AC-12; NIST SP 800-53 Rev 5: AC-12) CCI-002891 (NIST SP 800-53 Rev 4: MA-4 (7); NIST SP 800-53 Rev 5: MA-4 (7)) | ||||||||||||||||||||||||||||||||
| Description: | Terminating an unresponsive SSH session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended. Quickly terminating an idle SSH session will also free up resources committed by the managed network element. Terminating network connections associated with communications sessions includes, for example, deallocating associated TCP/IP address/port pairs at the operating system level and deallocating networking assignments at the application level if multiple application sessions are using a single operating system-level network connection. This does not mean the operating system terminates all sessions or network access; it only ends the unresponsive session and releases the resources associated with that session. Windows Server 2025 uses $env:ProgramData/ssh/sshd_config for configurations of OpenSSH. Within the sshd_config, the product of the values of "ClientAliveInterval" and "ClientAliveCountMax" are used to establish the inactivity threshold. The "ClientAliveInterval" is a timeout interval in seconds, after which if no data has been received from the client, sshd will send a message through the encrypted channel to request a response from the client. The "ClientAliveCountMax" is the number of client alive messages that may be sent without sshd receiving any messages back from the client. If this threshold is met, sshd will disconnect the client. For more information on these settings and others, refer to the sshd_config man pages. Satisfies: SRG-OS-000126-GPOS-00066, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, SRG-OS-000395-GPOS-00176 | ||||||||||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify the "ClientAliveInterval" variable is set to a value of "600" or less by performing the following command: C:\ > Get-Content "$env:ProgramData\ssh\sshd_config" | Select-String -Pattern '^\s*ClientAliveInterval' ClientAliveInterval 600 If "ClientAliveInterval" does not exist, does not have a value of "600" or less, or is commented out, this is a finding. | ||||||||||||||||||||||||||||||||
| Fix Text: | To configure the system, add or modify the following line in the "$env:ProgramData/ssh/sshd_config" file. ClientAliveInterval 600 Restart the OpenSSH service for the settings to take effect. | ||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||
| Tests: |
|
V-285320 - The Windows Server 2025 OpenSSH configuration file must conform to minimum requirements.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285320r1256736_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-SH-000080 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Service configuration files enable or disable features of their respective services, which if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files must be owned by the correct group to prevent unauthorized changes. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify the permissions of the "$env:ProgramData/ssh/sshd_config" file with the following command: C:\ > icacls $env:ProgramData/ssh/sshd_config C:\ProgramData\ssh\sshd_config NT AUTHORITY\SYSTEM:(F) BUILTIN\Administrators:(F) NT AUTHORITY\Authenticated Users:(RX) Successfully processed 1 files; Failed processing 0 files If the "$env:ProgramData/ssh/sshd_config" file does not have the default permission as in the example output, this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Maintain the permissions of the "$env:ProgramData/ssh/sshd_config" file as follows: NT AUTHORITY\SYSTEM:(F) BUILTIN\Administrators:(F) NT AUTHORITY\Authenticated Users:(RX) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-285321 - Windows Server 2025 OpenSSH private host key files must conform to minimum requirements.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285321r1211191_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-SH-000090 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | If an unauthorized user obtains the private SSH host key file, the host could be impersonated. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify the SSH private host key files permissions with the following command: C:\ > Get-ChildItem -Path "C:\ProgramData\ssh" -Filter "*_key" -File | ForEach-Object { icacls.exe $_.FullName } C:\ProgramData\ssh\ssh_host_ecdsa_key BUILTIN\Administrators:(F) NT AUTHORITY\SYSTEM:(F) Successfully processed 1 files; Failed processing 0 files C:\ProgramData\ssh\ssh_host_ed25519_key BUILTIN\Administrators:(F) NT AUTHORITY\SYSTEM:(F) Successfully processed 1 files; Failed processing 0 files C:\ProgramData\ssh\ssh_host_rsa_key BUILTIN\Administrators:(F) NT AUTHORITY\SYSTEM:(F) Successfully processed 1 files; Failed processing 0 files If any private host key file does not have the default permission as in the example output, this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Maintain the permissions of the private host key files as follows: BUILTIN\Administrators:(F) NT AUTHORITY\SYSTEM:(F) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-285322 - Windows Server 2025 OpenSSH public host key files must conform to minimum requirements.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285322r1211194_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-SH-000100 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | If a public host key file is modified by an unauthorized user, the SSH service may be compromised. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify the SSH public host key files permissions with the following command: C:\ > Get-ChildItem -Path "C:\ProgramData\ssh" -Filter "*key.pub" -File | ForEach-Object { icacls.exe $_.FullName } C:\ProgramData\ssh\ssh_host_ecdsa_key.pub BUILTIN\Administrators:(F) NT AUTHORITY\SYSTEM:(F) Successfully processed 1 files; Failed processing 0 files C:\ProgramData\ssh\ssh_host_ed25519_key.pub BUILTIN\Administrators:(F) NT AUTHORITY\SYSTEM:(F) Successfully processed 1 files; Failed processing 0 files C:\ProgramData\ssh\ssh_host_rsa_key.pub BUILTIN\Administrators:(F) NT AUTHORITY\SYSTEM:(F) Successfully processed 1 files; Failed processing 0 files If any public host key file does not have the default permission as in the example output, this is a finding. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Maintain the permissions of the public host key files as follows: BUILTIN\Administrators:(F) NT AUTHORITY\SYSTEM:(F) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-285323 - Windows Server 2025 OpenSSH must not allow GSSAPI authentication.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-285323r1211197_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Applicability: | Windows_OpenSSH | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-SH-000110 | ||||||||||||||||||||||||
| Identities: | CCI-001813 (NIST SP 800-53 Rev 4: CM-5 (1); NIST SP 800-53 Rev 5: CM-5 (1) (a)) | ||||||||||||||||||||||||
| Description: | Generic Security Service Application Program Interface (GSSAPI) authentication is used to provide additional authentication mechanisms to applications. Allowing GSSAPI authentication through SSH exposes the system's GSSAPI to remote hosts, increasing the attack surface of the system. Satisfies: SRG-OS-000364-GPOS-00151, SRG-OS-000480-GPOS-00228 | ||||||||||||||||||||||||
| Check Text: | If OpenSSH is not installed on the system, this requirement is not applicable. Verify the system does not allow GSSAPI authentication with the following command: C:\ > Get-Content "$env:ProgramData\ssh\sshd_config" | Select-String -Pattern '^\s*GSSAPIAuthentication' GSSAPIAuthentication no If the value is returned as "yes", the returned line is commented out, or no output is returned, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | To configure the system, add or modify the following line in the "$env:ProgramData/ssh/sshd_config" file: GSSAPIAuthentication no Restart the OpenSSH service for the settings to take effect. | ||||||||||||||||||||||||
| Severity: | medium | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-277982 - Windows Server 2025 must install security-relevant software updates within 30 days unless the time period is directed by an authoritative source (e.g., IAVM, CTOs, DTMs, STIGs).
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277982r1181944_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000001 | ||||||||||
| Identities: | CCI-002605 (NIST SP 800-53 Rev 4: SI-2 c; NIST SP 800-53 Rev 5: SI-2 c) | ||||||||||
| Description: | Security flaws with operating systems are discovered daily. Vendors are constantly updating and patching their products to address newly discovered security vulnerabilities. Organizations (including any contractor to the organization) are required to promptly install security-relevant software updates (e.g., patches, service packs, and hot fixes). Flaws discovered during security assessments, continuous monitoring, incident response activities, or information system error handling must also be addressed expeditiously. | ||||||||||
| Check Text: | Review the operating system documentation and configuration to determine if the system checks in with a patch management system to install security-relevant software updates within a timeframe directed by an authoritative source. If the operating system does not install security-relevant patches within the time period directed by the authoritative source, this is a finding. | ||||||||||
| Fix Text: | Configure the operating system to use a patch management system to ensure security-relevant updates are installed within the time period directed by the authoritative source. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-277983 - Windows Server 2025 must prohibit the use or connection of unauthorized hardware components.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277983r1180655_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000002 | ||||||||||
| Identities: | CCI-003959 (NIST SP 800-53 Rev 5: CM-7 (9) (b)) | ||||||||||
| Description: | Hardware components provide the foundation for organizational systems and the platform for the execution of authorized software programs. Managing the inventory of hardware components and controlling which hardware components are permitted to be installed or connected to organizational systems is essential to provide adequate security. | ||||||||||
| Check Text: | Verify the operating system is configured to prohibit the use or connection of unauthorized hardware components. If the operating system is using undocumented or unapproved hardware, this is a finding. | ||||||||||
| Fix Text: | Configure the operating system to prohibit the use or connection of unauthorized hardware components. Remove any hardware that is not documented or not approved by the information system security officer (ISSO) or information system security manager (ISSM). | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-277985 - Windows Server 2025 users with administrative privileges must have separate accounts for administrative duties and normal operational tasks.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277985r1182240_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000010 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | Using a privileged account to perform routine functions makes the computer vulnerable to malicious software inadvertently introduced during a session that has been granted full privileges. | ||||||||||
| Check Text: | Verify each user with administrative privileges has been assigned a unique administrative account separate from their standard user account. If users with administrative privileges do not have separate accounts for administrative functions and standard user functions, this is a finding. | ||||||||||
| Fix Text: | Ensure each user with administrative privileges has a separate account for user duties and one for privileged duties. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-277988 - Windows Server 2025 members of the Backup Operators group must have separate accounts for backup duties and normal operational tasks.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277988r1182011_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000040 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | Backup Operators are able to read and write to any file in the system, regardless of the rights assigned to it. Backup and restore rights permit users to circumvent the file access restrictions present on NTFS disk drives for backup and restore purposes. Members of the Backup Operators group must have separate logon accounts for performing backup duties. | ||||||||||
| Check Text: | If no accounts are members of the Backup Operators group, this is not applicable. Verify users with accounts in the Backup Operators group have a separate user account for backup functions and for performing normal user tasks. If users with accounts in the Backup Operators group do not have separate accounts for backup functions and standard user functions, this is a finding. | ||||||||||
| Fix Text: | Ensure each member of the Backup Operators group has separate accounts for backup functions and standard user functions. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-277990 - Windows Server 2025 manually managed application account passwords must be changed at least annually or when a system administrator with knowledge of the password leaves the organization.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277990r1182248_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000060 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | Setting application account passwords to expire may cause applications to stop functioning. However, not changing them on a regular basis exposes them to attack. If managed service accounts are used, this alleviates the need to manually change application account passwords. | ||||||||||
| Check Text: | Determine if manually managed application/service accounts exist. If none exist, this is not applicable. If passwords for manually managed application/service accounts are not changed at least annually or when an administrator with knowledge of the password leaves the organization, this is a finding. Identify manually managed application/service accounts. To determine the date a password was last changed for domain controllers: Open PowerShell. Enter "Get-AdUser -Identity [application account name] -Properties PasswordLastSet | FT Name, PasswordLastSet", where [application account name] is the name of the manually managed application/service account. If the "PasswordLastSet" date is more than one year old, this is a finding. For member servers and stand-alone or nondomain-joined systems: Open command prompt. Enter 'Net User [application account name] | Find /i "Password Last Set"', where [application account name] is the name of the manually managed application/service account. If the "Password Last Set" date is more than one year old, this is a finding. | ||||||||||
| Fix Text: | Change passwords for manually managed application/service accounts at least annually or when an administrator with knowledge of the password leaves the organization. It is recommended that system-managed service accounts be used whenever possible. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-277991 - Windows Server 2025 shared user accounts must not be permitted.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277991r1181778_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000070 | ||||||||||
| Identities: | CCI-000764 (NIST SP 800-53: IA-2; NIST SP 800-53A: IA-2.1; NIST SP 800-53 Rev 4: IA-2; NIST SP 800-53 Rev 5: IA-2) | ||||||||||
| Description: | Shared accounts (accounts where two or more people log on with the same user identification) do not provide adequate identification and authentication. There is no way to provide for nonrepudiation or individual accountability for system access and resource usage. | ||||||||||
| Check Text: | Determine whether any shared accounts exist. If no shared accounts exist, this is not applicable. Shared accounts, such as required by an application, may be approved by the organization. This must be documented with the information system security officer (ISSO). Documentation must include the reason for the account, who has access to the account, and how the risk of using the shared account is mitigated to include monitoring account activity. If unapproved shared accounts exist, this is a finding. | ||||||||||
| Fix Text: | Remove unapproved shared accounts from the system. Document required shared accounts with the ISSO. Documentation must include the reason for the account, who has access to the account, and how the risk of using the shared account is mitigated to include monitoring account activity. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-277992 - Windows Server 2025 must employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277992r1182016_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000080 | ||||||||||
| Identities: | CCI-001774 (NIST SP 800-53 Rev 4: CM-7 (5) (b); NIST SP 800-53 Rev 5: CM-7 (5) (b)) | ||||||||||
| Description: | Using an allowlist provides a configuration management method to allow the execution of only authorized software. Using only authorized software decreases risk by limiting the number of potential vulnerabilities. The organization must identify authorized software programs and only permit execution of authorized software. The process used to identify software programs that are authorized to execute on organizational information systems is commonly referred to as allowlisting. | ||||||||||
| Check Text: | Verify the operating system employs a deny-all, permit-by-exception policy to allow the execution of authorized software programs. If an application allowlisting program is not in use on the system, this is a finding. Configuration of allowlisting applications will vary by the program. AppLocker is a allowlisting application built in to Windows Server. A deny-by-default implementation is initiated by enabling any AppLocker rules within a category, only allowing what is specified by defined rules. If AppLocker is used, perform the following to view the configuration of AppLocker: Open PowerShell. If the AppLocker PowerShell module has not been imported previously, execute the following first: Import-Module AppLocker Execute the following command, substituting c:\temp\file.xml with a location and file name appropriate for the system: Get-AppLockerPolicy -Effective -XML > c:\temp\file.xml This will produce an XML file with the effective settings that can be viewed in a browser or opened in a program such as Excel for review. Implementation guidance for AppLocker is available in the NSA paper "Application Whitelisting using Microsoft AppLocker" at the following link: https://www.iad.gov/iad/library/ia-guidance/tech-briefs/application-whitelisting-using-microsoft-applocker.cfm | ||||||||||
| Fix Text: | Configure an application allowlisting program to employ a deny-all, permit-by-exception policy to allow the execution of authorized software programs. Configuration of allowlisting applications will vary by the program. AppLocker is a allowlisting application built in to Windows Server. If AppLocker is used, it is configured through group policy in Computer Configuration >> Windows Settings >> Security Settings >> Application Control Policies >> AppLocker. Implementation guidance for AppLocker is available in the NSA paper "Application Whitelisting using Microsoft AppLocker" at the following link: https://www.iad.gov/iad/library/ia-guidance/tech-briefs/application-whitelisting-using-microsoft-applocker.cfm | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-277995 - Windows Server 2025 must use an antivirus program.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277995r1180691_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000110 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | Malicious software can establish a base on individual desktops and servers. Employing an automated mechanism to detect this type of software will aid in elimination of the software from the operating system. | ||||||||||
| Check Text: | Verify an antivirus solution is installed on the system. The antivirus solution may be bundled with an approved host-based security solution. If there is no antivirus solution installed on the system, this is a finding. Verify if Microsoft Defender antivirus is in use or enabled: Open PowerShell. Enter "get-service | where {$_.DisplayName -Like "*Defender*"} | Select Status,DisplayName" Verify if third-party antivirus is in use or enabled: Open PowerShell. Enter "get-service | where {$_.DisplayName -Like "*mcafee*"} | Select Status,DisplayName Enter "get-service | where {$_.DisplayName -Like "*symantec*"} | Select Status,DisplayName | ||||||||||
| Fix Text: | If no antivirus software is in use, install Microsoft Defender or third-party antivirus. Open PowerShell. Enter "Install-WindowsFeature -Name Windows-Defender". For third-party antivirus, install per antivirus instructions and disable Windows Defender. Open PowerShell. Enter "Uninstall-WindowsFeature -Name Windows-Defender". | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-277996 - Windows Server 2025 must have a host-based intrusion detection and prevention service (IDPS) installed.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-277996r1182235_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000120 | ||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||
| Description: | A properly configured host-based intrusion detection system (HIDS) or host-based intrusion prevention system (HIPS) provides another level of defense against unauthorized access to critical servers. With proper configuration and logging enabled, such a system can stop and/or alert for many attempts to gain unauthorized access to resources. | ||||||||||
| Check Text: | Determine whether there is a host based intrusion detection and prevention service on each server. This requirement is not applicable on a system that has the role as the IDPS. However, this exception must be documented with the information system security officer (ISSO). If a host-based IDPS is not installed on the system, this is a finding. | ||||||||||
| Fix Text: | Install a host-based IDPS on each server. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278003 - Outdated or unused accounts on Windows Server 2025 must be removed or disabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278003r1182254_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000190 | ||||||||||
| Identities: | CCI-003627 (NIST SP 800-53 Rev 5: AC-2 (3) (a)) CCI-003628 (NIST SP 800-53 Rev 5: AC-2 (3) (b)) | ||||||||||
| Description: | Outdated or unused accounts provide penetration points that may go undetected. Inactive accounts must be deleted if no longer necessary or, if still required, disabled until needed. Satisfies: SRG-OS-000118-GPOS-00060, SRG-OS-000590-GPOS-00110 | ||||||||||
| Check Text: | Open Windows PowerShell. Domain Controllers: Enter "Search-ADAccount -AccountInactive -UsersOnly -TimeSpan 35.00:00:00". This will return accounts that have not been logged on to for 35 days, along with various attributes such as the Enabled status and LastLogonDate. Member servers and stand-alone or nondomain-joined systems: Copy or enter the lines below to the PowerShell window and enter. (Entering twice may be required.) ([ADSI]('WinNT://{0}' -f $env:COMPUTERNAME)).Children | Where { $_.SchemaClassName -eq 'user' } | ForEach { $user = ([ADSI]$_.Path) $lastLogin = $user.Properties.LastLogin.Value $enabled = ($user.Properties.UserFlags.Value -band 0x2) -ne 0x2 if ($lastLogin -eq $null) { $lastLogin = 'Never' } Write-Host $user.Name $lastLogin $enabled } This will return a list of local accounts with the account name, last logon, and if the account is enabled (True/False). For example: User1 10/31/2015 5:49:56 AM True Review the list of accounts returned by the above queries to determine the finding validity for each account reported. Exclude the following accounts: - Built-in administrator account (Renamed, SID ending in 500). - Built-in guest account (Renamed, Disabled, SID ending in 501). - Application accounts. If any enabled accounts have not been logged on to within the past 35 days, this is a finding. Inactive accounts that have been reviewed and deemed to be required must be documented with the information system security officer (ISSO). | ||||||||||
| Fix Text: | Regularly review accounts to determine if they are still active. Remove or disable accounts that have not been used in the last 35 days. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278006 - Windows Server 2025 system files must be monitored for unauthorized changes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278006r1182237_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000220 | ||||||||||
| Identities: | CCI-001744 (NIST SP 800-53 Rev 4: CM-3 (5); NIST SP 800-53 Rev 5: CM-3 (5)) | ||||||||||
| Description: | Monitoring system files for changes against a baseline on a regular basis may help detect the possible introduction of malicious code on a system. | ||||||||||
| Check Text: | Determine whether the system is monitored for unauthorized changes to system files (e.g., *.exe, *.bat, *.com, *.cmd, and *.dll) against a baseline on a weekly basis. If system files are not monitored for unauthorized changes, this is a finding. An approved and properly configured solution will contain both a list of baselines that includes all system file locations and a file comparison task that is scheduled to run at least weekly. | ||||||||||
| Fix Text: | Monitor the system for unauthorized changes to system files (e.g., *.exe, *.bat, *.com, *.cmd, and *.dll) against a baseline on a weekly basis. This can be done with the use of various monitoring tools. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278007 - Windows Server 2025 nonsystem-created file shares must limit access to groups that require it.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278007r1181789_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000230 | ||||||||||
| Identities: | CCI-001090 (NIST SP 800-53: SC-4; NIST SP 800-53A: SC-4.1; NIST SP 800-53 Rev 4: SC-4; NIST SP 800-53 Rev 5: SC-4) | ||||||||||
| Description: | Shares on a system provide network access. To prevent exposing sensitive information, where shares are necessary, permissions must be reconfigured to give the minimum access to accounts that require it. | ||||||||||
| Check Text: | If only system-created shares such as "ADMIN$", "C$", and "IPC$" exist on the system, this is not applicable. (System-created shares will display a message that it has been shared for administrative purposes when "Properties" is selected.) Run "Computer Management". Navigate to System Tools >> Shared Folders >> Shares. Right-click any nonsystem-created shares. Select "Properties". Select the "Share Permissions" tab. If the file shares have not been configured to restrict permissions to the specific groups or accounts that require access, this is a finding. Select the "Security" tab. If the permissions have not been configured to restrict permissions to the specific groups or accounts that require access, this is a finding. | ||||||||||
| Fix Text: | If a nonsystem-created share is required on a system, configure the share and NTFS permissions to limit access to the specific groups or accounts that require it. Remove any unnecessary nonsystem-created shares. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278010 - Windows Server 2025 must implement protection methods such as TLS, encrypted VPNs, or IPsec if the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278010r1180736_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000260 | ||||||||||
| Identities: | CCI-002420 (NIST SP 800-53 Rev 4: SC-8 (2); NIST SP 800-53 Rev 5: SC-8 (2)) CCI-002422 (NIST SP 800-53 Rev 4: SC-8 (2); NIST SP 800-53 Rev 5: SC-8 (2)) | ||||||||||
| Description: | Information can be either unintentionally or maliciously disclosed or modified during preparation for transmission, for example, during aggregation, at protocol transformation points, and during packing/unpacking. These unauthorized disclosures or modifications compromise the confidentiality or integrity of the information. Ensuring the confidentiality of transmitted information requires the operating system to take measures in preparing information for transmission. This can be accomplished via access control and encryption. Use of this requirement will be limited to situations where the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process. When transmitting data, operating systems need to support transmission protection mechanisms such as TLS, encrypted VPNs, or IPsec. Satisfies: SRG-OS-000425-GPOS-00189, SRG-OS-000426-GPOS-00190 | ||||||||||
| Check Text: | If the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process, verify protection methods such as TLS, encrypted VPNs, or IPsec have been implemented. If protection methods have not been implemented, this is a finding. | ||||||||||
| Fix Text: | Configure protection methods such as TLS, encrypted VPNs, or IPsec when the data owner has a strict requirement for ensuring data integrity and confidentiality is maintained at every step of the data transfer and handling process. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278011 - Windows Server 2025 must have the roles and features required by the system documented.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278011r1182239_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000270 | ||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||
| Description: | Unnecessary roles and features increase the attack surface of a system. Limiting roles and features of a system to only those necessary reduces this potential. The standard installation option (previously called Server Core) further reduces this when selected at installation. | ||||||||||
| Check Text: | Required roles and features will vary based on the function of the individual system. Roles and features specifically required to be disabled per the STIG are identified in separate requirements. Run the following Powershell command to determine installed features: Get-WindowsFeature | Where-Object {$_. installstate -eq "installed"} | Format-List Displayname, Name, Featuretype If the organization has not documented the roles and features displayed as required for the system, this is a finding. | ||||||||||
| Fix Text: | Document the roles and features required for the system to operate. Uninstall any that are not required. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278012 - Windows Server 2025 must have a host-based firewall installed and enabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278012r1181951_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000280 | ||||||||||
| Identities: | CCI-002406 (NIST SP 800-53 Rev 4: SC-7 (12); NIST SP 800-53 Rev 5: SC-7 (12)) | ||||||||||
| Description: | A firewall provides a line of defense against attack, allowing or blocking inbound and outbound connections based on a set of rules. Satisfies: SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00232 | ||||||||||
| Check Text: | Determine if a host-based firewall is installed and enabled on the system. If a host-based firewall is not installed and enabled on the system, this is a finding. The configuration requirements will be determined by the applicable firewall STIG. | ||||||||||
| Fix Text: | Install and enable a host-based firewall on the system. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278013 - Windows Server 2025 must automatically remove or disable temporary user accounts after 72 hours.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278013r1256709_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000300 | ||||||||||
| Identities: | CCI-000016 (NIST SP 800-53: AC-2 (2); NIST SP 800-53A: AC-2 (2).1 (ii); NIST SP 800-53 Rev 4: AC-2 (2); NIST SP 800-53 Rev 5: AC-2 (2)) | ||||||||||
| Description: | If temporary user accounts remain active when no longer needed or for an excessive period, these accounts may be used to gain unauthorized access. To mitigate this risk, automated termination of all temporary accounts must be set upon account creation. Temporary accounts are established as part of normal account activation procedures when there is a need for short-term accounts without the demand for immediacy in account activation. If temporary accounts are used, the operating system must be configured to automatically terminate these types of accounts after a DoW-defined time period of 72 hours. To address access requirements, many operating systems may be integrated with enterprise-level authentication/access mechanisms that meet or exceed access control policy requirements. | ||||||||||
| Check Text: | Review temporary user accounts for expiration dates. Determine if temporary user accounts are used and identify any that exist. If none exist, this is not applicable. Domain Controllers: Open PowerShell. Enter "Search-ADAccount -AccountExpiring | FT Name, AccountExpirationDate". If "AccountExpirationDate" has not been defined within 72 hours for any temporary user account, this is a finding. Member servers and stand-alone or nondomain-joined systems: Open command prompt. Run "Net user [username]", where [username] is the name of the temporary user account. If "Account expires" has not been defined within 72 hours for any temporary user account, this is a finding. | ||||||||||
| Fix Text: | Configure temporary user accounts to automatically expire within 72 hours. Domain accounts can be configured with an account expiration date, under "Account" properties. Local accounts can be configured to expire with the command "Net user [username] /expires:[mm/dd/yyyy]", where [username] is the name of the temporary user account. Delete any temporary user accounts that are no longer necessary. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278014 - Windows Server 2025 must automatically remove or disable emergency accounts after the crisis is resolved or within 72 hours.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278014r1182263_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000310 | ||||||||||
| Identities: | CCI-001682 (NIST SP 800-53: AC-2 (2); NIST SP 800-53A: AC-2 (2).1 (ii); NIST SP 800-53 Rev 4: AC-2 (2); NIST SP 800-53 Rev 5: AC-2 (2)) | ||||||||||
| Description: | Emergency administrator accounts are privileged accounts established in response to crisis situations where the need for rapid account activation is required. Therefore, emergency account activation may bypass normal account authorization processes. If these accounts are automatically disabled, system maintenance during emergencies may not be possible, thus adversely affecting system availability. Emergency administrator accounts are different from infrequently used accounts (i.e., local logon accounts used by system administrators when network or normal logon/access is not available). Infrequently used accounts are not subject to automatic termination dates. Emergency accounts are accounts created in response to crisis situations, usually for use by maintenance personnel. The automatic expiration or disabling time period may be extended as needed until the crisis is resolved; however, it must not be extended indefinitely. A permanent account must be established for privileged users who need long-term maintenance accounts. To address access requirements, many operating systems can be integrated with enterprise-level authentication/access mechanisms that meet or exceed access control policy requirements. | ||||||||||
| Check Text: | Determine if emergency administrator accounts are used and identify any that exist. If none exist, this is not applicable. If emergency administrator accounts cannot be configured with an expiration date due to an ongoing crisis, the accounts must be disabled or removed when the crisis is resolved. If emergency administrator accounts have not been configured with an expiration date or have not been disabled or removed following the resolution of a crisis, this is a finding. Domain Controllers: Open PowerShell. Enter "Search-ADAccount -AccountExpiring | FT Name, AccountExpirationDate". If "AccountExpirationDate" has been defined and is not within 72 hours for an emergency administrator account, this is a finding. Member servers and stand-alone or nondomain-joined systems: Open command prompt. Run "Net user [username]", where [username] is the name of the emergency account. If "Account expires" has been defined and is not within 72 hours for an emergency administrator account, this is a finding. | ||||||||||
| Fix Text: | Remove emergency administrator accounts after a crisis has been resolved or configure the accounts to automatically expire within 72 hours. Domain accounts can be configured with an account expiration date, under "Account" properties. Local accounts can be configured to expire with the command "Net user [username] /expires:[mm/dd/yyyy]", where [username] is the name of the temporary user account. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278017 - Windows Server 2025 must not have Wi-Fi enabled unless required by the organization.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278017r1256711_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000332 | ||||||||||
| Identities: | CCI-000382 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (iii); NIST SP 800-53 Rev 4: CM-7 b; NIST SP 800-53 Rev 5: CM-7 b) | ||||||||||
| Description: | Unnecessary connections could increase the attack surface of a system. Some of these services may not support required levels of authentication or encryption. | ||||||||||
| Check Text: | Open PowerShell or a Command prompt. Type " ipconfig /all". Review the resulting display for existence of a Wireless LAN or Wi-Fi connection. If none are listed, issue the following command in PowerShell: Get-NetAdapter | Where-Object PhysicalMediaType -eq "Native 802.11" Note: This command isolates the search to physical Wi-Fi adapters using the standard 802.11 wireless specification and does not rely on the adapter still having its default system name. If there is a Wi-Fi or Wireless LAN connection listed, this is a finding. | ||||||||||
| Fix Text: | Validate the site documentation to ensure the approval of use for Wi-Fi server connections. If the connection (s) have not been approved, go to "Settings" then "Network and Internet" and remove/disable the Wi-Fi adapter. Any Wi-Fi connections listed or in use must be documented and approved by the information system security officer (ISSO) or authorizing official (AO). | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278041 - Windows Server 2025 audit records must be backed up to a different system or media than the system being audited.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278041r1180829_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-AU-000010 | ||||||||||
| Identities: | CCI-001851 (NIST SP 800-53 Rev 4: AU-4 (1); NIST SP 800-53 Rev 5: AU-4 (1)) | ||||||||||
| Description: | Protection of log data includes ensuring the log data is not accidentally lost or deleted. Audit information stored in one location is vulnerable to accidental or incidental deletion or alteration. | ||||||||||
| Check Text: | Determine if a process to back up log data to a different system or media than the system being audited has been implemented. If it has not, this is a finding. | ||||||||||
| Fix Text: | Establish and implement a process for backing up log data to another system or media other than the system being audited. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278042 - Windows Server 2025 must, at a minimum, off-load audit records of interconnected systems in real time and off-load stand-alone or nondomain-joined systems weekly.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278042r1182270_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-AU-000020 | ||||||||||
| Identities: | CCI-001851 (NIST SP 800-53 Rev 4: AU-4 (1); NIST SP 800-53 Rev 5: AU-4 (1)) | ||||||||||
| Description: | Protection of log data includes ensuring the log data is not accidentally lost or deleted. Audit information stored in one location is vulnerable to accidental or incidental deletion or alteration. | ||||||||||
| Check Text: | Verify the audit records, at a minimum, are off-loaded for interconnected systems in real time and off-loaded for stand-alone or nondomain-joined systems weekly. If they are not, this is a finding. | ||||||||||
| Fix Text: | Configure the system to, at a minimum, off-load audit records of interconnected systems in real time and off-load stand-alone or nondomain-joined systems weekly. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278144 - Windows Server 2025 domain controllers must run on a machine dedicated to that function.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278144r1182094_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-DC-000130 | ||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||
| Description: | Executing application servers on the same host machine with a directory server may substantially weaken the security of the directory server. Web or database server applications usually require the addition of many programs and accounts, increasing the attack surface of the computer. Some applications require the addition of privileged accounts, providing potential sources of compromise. Some applications (such as Microsoft Exchange) may require the use of network ports or services conflicting with the directory server. In this case, nonstandard ports might be selected, and this could interfere with intrusion detection or prevention services. | ||||||||||
| Check Text: | This applies to domain controllers, it is not applicable for other systems. Review the installed roles the domain controller is supporting. Start Server Manager. Select "AD DS" in the left pane then select the server name under "Servers" to the right. Select "Add (or Remove) Roles and Features" from "Tasks" in the "Roles and Features" section. (Cancel before any changes are made.) Determine if any additional server roles are installed. A basic domain controller setup will include the following: - Active Directory Domain Services. - DNS Server. - File and Storage Services. If any roles not requiring installation on a domain controller are installed, this is a finding. A Domain Name System (DNS) server integrated with the directory server (e.g., AD-integrated DNS) is an acceptable application. However, the DNS server must comply with the DNS STIG security requirements. Run "Programs and Features". Review installed applications. If any applications are installed that are not required for the domain controller, this is a finding. | ||||||||||
| Fix Text: | Remove additional roles or applications such as web, database, and email from the domain controller. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278145 - Windows Server 2025 must use separate, NSA-approved (Type 1) cryptography to protect the directory data in transit for directory service implementations at a classified confidentiality level when replication data traverses a network cleared to a lower level than the data.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278145r1182096_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-DC-000140 | ||||||||||
| Identities: | CCI-002450 (NIST SP 800-53 Rev 4: SC-13; NIST SP 800-53 Rev 5: SC-13 b) | ||||||||||
| Description: | Directory data that is not appropriately encrypted is subject to compromise. Commercial-grade encryption does not provide adequate protection when the classification level of directory data in transit is higher than the level of the network. | ||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Review the organization network diagram(s) or documentation to determine the level of classification for the network(s) over which replication data is transmitted. Determine the classification level of the Windows domain controller. If the classification level of the Windows domain controller is higher than the level of the networks, review the organization network diagram(s) and directory implementation documentation to determine if NSA-approved encryption is used to protect the replication network traffic. If the classification level of the Windows domain controller is higher than the level of the network traversed and NSA-approved encryption is not used, this is a finding. | ||||||||||
| Fix Text: | Configure NSA-approved (Type 1) cryptography to protect the directory data in transit for directory service implementations at a classified confidentiality level that transfer replication data through a network cleared to a lower level than the data. | ||||||||||
| Severity: | medium | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
Detailed Results: Low Severity (CAT III)
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'System\CurrentControlSet\Services\Tcpip6\Parameters'
- check = 'name' must be equal to 'DisableIPSourceRouting'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'System\CurrentControlSet\Services\Tcpip\Parameters'
- check = 'name' must be equal to 'DisableIPSourceRouting'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Services\Tcpip\Parameters'
- check = 'name' must be equal to 'EnableICMPRedirect'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'System\CurrentControlSet\Services\Netbt\Parameters'
- check = 'name' must be equal to 'NoNameReleaseOnDemand'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\AppCompat'
- check = 'name' must be equal to 'DisableInventory'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- false (All child tests must be true. (AND))
- false (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'Software\Policies\Microsoft\Windows\DeliveryOptimization'
- check = 'name' must be equal to 'DODownloadMode'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '2'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '99'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Policies\Microsoft\Windows\Explorer'
- check = 'name' must be equal to 'NoHeapTerminationOnCorruption'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '0'
- false (All child tests must be true. (AND))
- check = 'shell' must be equal to 'cmd'
- for command, the following must be true:
- command must be equal to 'dsquery * "cn=Default Query Policy,cn=Query-Policies,cn=Directory Service, cn=Windows NT,cn=Services,cn=Configuration,DC=lab,DC=local" -attr LDAPAdminLimits'
- check = 'pattern' must be equal to 'MaxConnIdleTime=(\d+)'
- check_existence = 'at_least_one_exists', check = all 'shell' must be equal to 'cmd'
- check_existence = 'at_least_one_exists', check = all 'subexpression' must be less than or equal to '300'
- shell equals 'cmd'
- command equals 'dsquery * "cn=Default Query Policy,cn=Query-Policies,cn=Directory Service, cn=Windows NT,cn=Services,cn=Configuration,DC=lab,DC=local" -attr LDAPAdminLimits'
- pattern equals 'MaxConnIdleTime=(\d+)'
- exit_status equals '0'
- stdout_line equals ' MaxValRange=1500;MaxReceiveBuffer=10485760;MaxDatagramRecv=4096;MaxPoolThreads=4;MaxResultSetSize=262144;MaxTempTableSize=10000;MaxQueryDuration=120;MaxPageSize=1000;MaxNotificationPerConn=5;MaxActiveQueries=20;MaxConnIdleTime=900;InitRecvTimeout=120;MaxConnections=5000; '
- subexpression equals '900'
- false (All child tests must be true. (AND))
- false (One or more child tests must be true. (OR))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeCaption'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '^D(oD|OD) N(otice|OTICE) (and|AND) C(onsent|ONSENT) B(anner|ANNER)$'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeCaption'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- check = 'name' must be equal to 'LegalNoticeCaption'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_sz'
- check_existence = 'at_least_one_exists', check = all 'value' must match the pattern '^U\.?S\.? D(EPARTMENT|epartment) (OF|Of|of) D(EFENSE|efense) W(ARNING|arning) S(TATEMENT|tatement)$'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System'
- name equals 'LegalNoticeCaption'
- last_write_time equals '134337591420000000'
- type equals 'reg_sz'
- value equals ''
- windows_view equals '64_bit'
- true (All child tests must be true. (AND))
- true (All child tests must be true. (AND))
- check = 'hive' must be equal to 'HKEY_LOCAL_MACHINE'
- check = 'key' must be equal to 'SYSTEM\CurrentControlSet\Control\Session Manager'
- check = 'name' must be equal to 'ProtectionMode'
- check_existence = 'at_least_one_exists', check = all 'type' must be equal to 'reg_dword'
- check_existence = 'at_least_one_exists', check = all 'value' must be equal to '1'
- hive equals 'HKEY_LOCAL_MACHINE'
- key equals 'SYSTEM\CurrentControlSet\Control\Session Manager'
- name equals 'ProtectionMode'
- last_write_time equals '134338002050000000'
- type equals 'reg_dword'
- value equals '1'
- windows_view equals '64_bit'
- NOT_TESTED (All child tests must be true.)
- NOT_TESTED (All child tests must be true.)
V-278082 - Windows Server 2025 Internet Protocol version 6 (IPv6) source routing must be configured to the highest protection level to prevent IP source routing.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278082r1180952_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000030 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Configuring the system to disable IPv6 source routing protects against spoofing. | ||||||||||||||||||||||||
| Check Text: | Verify the registry value below: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\ Value Name: DisableIPSourceRouting Type: REG_DWORD Value: 0x00000002 (2) If the registry value does not exist or is not configured as specified, this is a finding. | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> MSS: (DisableIPSourceRouting IPv6) IP source routing protection level (protects against packet spoofing) to "Enabled" with "Highest protection, source routing is completely disabled" selected. This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively. | ||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278083 - Windows Server 2025 source routing must be configured to the highest protection level to prevent Internet Protocol (IP) source routing.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278083r1180955_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000040 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Configuring the system to disable IP source routing protects against spoofing. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: DisableIPSourceRouting Value Type: REG_DWORD Value: 0x00000002 (2) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> MSS: (DisableIPSourceRouting) IP source routing protection level (protects against packet spoofing) to "Enabled" with "Highest protection, source routing is completely disabled" selected. This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively. | ||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278084 - Windows Server 2025 must be configured to prevent Internet Control Message Protocol (ICMP) redirects from overriding Open Shortest Path First (OSPF)-generated routes.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278084r1180958_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000050 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Allowing ICMP redirect of routes can lead to traffic not being routed properly. When disabled, this forces ICMP to be routed via the shortest path first. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\ Value Name: EnableICMPRedirect Value Type: REG_DWORD Value: 0x00000000 (0) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> MSS: (EnableICMPRedirect) Allow ICMP redirects to override OSPF generated routes to "Disabled". This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively. | ||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278085 - Windows Server 2025 must be configured to ignore NetBIOS name release requests except from WINS servers.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278085r1180961_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000060 | ||||||||||||||||||||||||
| Identities: | CCI-002385 (NIST SP 800-53 Rev 4: SC-5; NIST SP 800-53 Rev 5: SC-5 a) | ||||||||||||||||||||||||
| Description: | Configuring the system to ignore name release requests, except from WINS servers, prevents a denial-of-service (DoS) attack. The DoS consists of sending a NetBIOS name release request to the server for each entry in the server's cache, causing a response delay in the normal operation of the server's WINS resolution capability. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry HiveHKEY_LOCAL_MACHINE Registry Path\SYSTEM\CurrentControlSet\Services\Netbt\Parameters\ Value NameNoNameReleaseOnDemand Value TypeREG_DWORD Value0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> MSS (Legacy) >> MSS: (NoNameReleaseOnDemand) Allow the computer to ignore NetBIOS name release requests except from WINS servers to "Enabled". This policy setting requires the installation of the MSS-Legacy custom templates included with the STIG package. "MSS-Legacy.admx" and "MSS-Legacy.adml" must be copied to the \Windows\PolicyDefinitions and \Windows\PolicyDefinitions\en-US directories respectively. | ||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278098 - Windows Server 2025 Application Compatibility Program Inventory must be prevented from collecting data and sending the information to Microsoft.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278098r1181000_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||
| Version: | WN25-CC-000200 | ||||||||||||||||||||||||
| Identities: | CCI-000381 (NIST SP 800-53: CM-7; NIST SP 800-53A: CM-7.1 (ii); NIST SP 800-53 Rev 4: CM-7 a; NIST SP 800-53 Rev 5: CM-7 a) | ||||||||||||||||||||||||
| Description: | Some features may communicate with the vendor, sending system information or downloading data or components for the feature. Turning off this capability will prevent potentially sensitive information from being sent outside the enterprise and will prevent uncontrolled updates to the system. This setting will prevent the Program Inventory from collecting data about a system and sending the information to Microsoft. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\AppCompat\ Value Name: DisableInventory Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Application Compatibility >> Turn off Inventory Collector to "Enabled". | ||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278104 - Windows Server 2025 Windows Update must not obtain updates from other PCs on the internet.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278104r1181018_rule | ||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-CC-000260 | ||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||||||||||||||||||||||
| Description: | Windows Update can obtain updates from additional sources instead of Microsoft. In addition to Microsoft, updates can be obtained from and sent to PCs on the local network as well as on the internet. This is part of the Windows Update trusted process; however, to minimize outside exposure, obtaining updates from or sending to systems on the internet must be prevented. | ||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\DeliveryOptimization\ Value Name: DODownloadMode Value Type: REG_DWORD Value: 0x00000000 (0) - No peering (HTTP Only) 0x00000001 (1) - Peers on same NAT only (LAN) 0x00000002 (2) - Local Network / Private group peering (Group) 0x00000063 (99) - Simple download mode, no peering (Simple) 0x00000064 (100) - Bypass mode, Delivery Optimization not used (Bypass) A value of 0x00000003 (3), internet, is a finding. | ||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> Delivery Optimization >> Download Mode to "Enabled" with any option except "Internet" selected. Acceptable selections include: Bypass (100) Group (2) HTTP only (0) LAN (1) Simple (99) | ||||||||||||||||||||||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278110 - Windows Server 2025 Turning off File Explorer heap termination on corruption must be disabled.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278110r1182063_rule | ||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||
| Version: | WN25-CC-000320 | ||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||
| Description: | Legacy plug-in applications may continue to function when a File Explorer session has become corrupt. Disabling this feature will prevent this. | ||||||||||||||||||||||
| Check Text: | The default behavior is for File Explorer heap termination on corruption to be enabled. If the registry Value Name below does not exist, this is not a finding. If it exists and is configured with a value of "0", this is not a finding. If it exists and is configured with a value of "1", this is a finding. Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Policies\Microsoft\Windows\Explorer\ Value Name: NoHeapTerminationOnCorruption Value Type: REG_DWORD Value: 0x00000000 (0) (or if the Value Name does not exist) | ||||||||||||||||||||||
| Fix Text: | The default behavior is for File Explorer heap termination on corruption to be disabled. To correct this, configure the policy value for Computer Configuration >> Administrative Templates >> Windows Components >> File Explorer >> Turn off heap termination on corruption to "Not Configured" or "Disabled". | ||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||
| Tests: |
|
V-278147 - Windows Server 2025 directory service must be configured to terminate LDAP-based network connections to the directory server after five minutes of inactivity.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278147r1192630_rule | ||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||
| Rule Applicability: | Windows_DomainController | ||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||
| Version: | WN25-DC-000160 | ||||||||||||||||||||||||||
| Identities: | CCI-001133 (NIST SP 800-53: SC-10; NIST SP 800-53A: SC-10.1 (ii); NIST SP 800-53 Rev 4: SC-10; NIST SP 800-53 Rev 5: SC-10) CCI-002361 (NIST SP 800-53 Rev 4: AC-12; NIST SP 800-53 Rev 5: AC-12) | ||||||||||||||||||||||||||
| Description: | The failure to terminate inactive network connections increases the risk of a successful attack on the directory server. The longer an established session is in progress, the more time an attacker has to hijack the session, implement a means to passively intercept data, or compromise any protections on client access. For example, if an attacker gains control of a client computer, an existing (already authenticated) session with the directory server could allow access to the directory. The lack of confidentiality protection in LDAP-based sessions increases exposure to this vulnerability. Satisfies: SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109 | ||||||||||||||||||||||||||
| Check Text: | This applies to domain controllers. It is not applicable for other systems. Open an elevated command prompt (run as administrator). Enter "ntdsutil". At the "ntdsutil:" prompt, enter "LDAP policies". At the "ldap policy:" prompt, enter "connections". At the "server connections:" prompt, enter "connect to server [host-name]" (where [host-name] is the computer name of the domain controller). At the "server connections:" prompt, enter "q". At the "ldap policy:" prompt, enter "show values". If the value for MaxConnIdleTime is greater than "300" (5 minutes) or is not specified, this is a finding. Enter "q" at the "ldap policy:" and "ntdsutil:" prompts to exit. Alternately, Dsquery can be used to display MaxConnIdleTime: Open "command prompt (Admin)". Enter the following command (on a single line). dsquery * "cn=Default Query Policy,cn=Query-Policies,cn=Directory Service, cn=Windows NT,cn=Services,cn=Configuration,dc=[forest-name]" -attr LDAPAdminLimits The quotes are required and dc=[forest-name] is the fully qualified LDAP name of the domain being reviewed (e.g., dc=disaost,dc=mil). If the results do not specify a "MaxConnIdleTime" or it has a value greater than "300" (5 minutes), this is a finding. | ||||||||||||||||||||||||||
| Fix Text: | Configure the directory service to terminate LDAP-based network connections to the directory server after 5 minutes of inactivity. Open an elevated command prompt (run as administrator). Enter "ntdsutil". At the "ntdsutil:" prompt, enter "LDAP policies". At the "ldap policy:" prompt, enter "connections". At the "server connections:" prompt, enter "connect to server [host-name]" (where [host-name] is the computer name of the domain controller). At the "server connections:" prompt, enter "q". At the "ldap policy:" prompt, enter "Set MaxConnIdleTime to 300". Enter "Commit Changes" to save. Enter "Show values" to verify changes. Enter "q" at the "ldap policy:" and "ntdsutil:" prompts to exit. | ||||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||
| Tests: |
|
V-278208 - Windows Server 2025 title for legal banner dialog box must be configured with the appropriate text.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278208r1181330_rule | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rule Result: | Fail | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Version: | WN25-SO-000140 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Identities: | CCI-000048 (NIST SP 800-53: AC-8 a; NIST SP 800-53A: AC-8.1 (ii); NIST SP 800-53 Rev 4: AC-8 a; NIST SP 800-53 Rev 5: AC-8 a) CCI-001384 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (i); NIST SP 800-53 Rev 4: AC-8 c 1; NIST SP 800-53 Rev 5: AC-8 c 1) CCI-001385 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001386 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001387 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (ii); NIST SP 800-53 Rev 4: AC-8 c 2; NIST SP 800-53 Rev 5: AC-8 c 2) CCI-001388 (NIST SP 800-53: AC-8 c; NIST SP 800-53A: AC-8.2 (iii); NIST SP 800-53 Rev 4: AC-8 c 3; NIST SP 800-53 Rev 5: AC-8 c 3) | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description: | Failure to display the logon banner prior to a logon attempt will negate legal proceedings resulting from unauthorized access to system resources. Satisfies: SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\ Value Name: LegalNoticeCaption Value Type: REG_SZ Value: See message title options below "DOD Notice and Consent Banner", "US Department of Defense Warning Statement", or an organization-defined equivalent. If an organization-defined title is used, it can in no case contravene or modify the language of the banner text required in WN25-SO-000150. Automated tools may only search for the titles defined above. If an organization-defined title is used, a manual review will be required. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> Interactive Logon: Message title for users attempting to log on to "DOD Notice and Consent Banner", "US Department of Defense Warning Statement", or an organization-defined equivalent. If an organization-defined title is used, it can in no case contravene or modify the language of the message text required in WN25-SO-000150. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Tests: |
|
V-278231 - Windows Server 2025 default permissions of global system objects must be strengthened.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278231r1181399_rule | ||||||||||||||||||||||||
| Test Type: | Automated | ||||||||||||||||||||||||
| Rule Result: | Pass | ||||||||||||||||||||||||
| Version: | WN25-SO-000370 | ||||||||||||||||||||||||
| Identities: | CCI-000366 (NIST SP 800-53: CM-6 b; NIST SP 800-53A: CM-6.1 (iv); NIST SP 800-53 Rev 4: CM-6 b; NIST SP 800-53 Rev 5: CM-6 b) | ||||||||||||||||||||||||
| Description: | Windows systems maintain a global list of shared system resources such as DOS device names, mutexes, and semaphores. Each type of object is created with a default Discretionary Access Control List (DACL) that specifies who can access the objects with what permissions. When this policy is enabled, the default DACL is stronger, allowing nonadministrative users to read shared objects but not to modify shared objects they did not create. | ||||||||||||||||||||||||
| Check Text: | If the following registry value does not exist or is not configured as specified, this is a finding: Registry Hive: HKEY_LOCAL_MACHINE Registry Path: \SYSTEM\CurrentControlSet\Control\Session Manager\ Value Name: ProtectionMode Value Type: REG_DWORD Value: 0x00000001 (1) | ||||||||||||||||||||||||
| Fix Text: | Configure the policy value for Computer Configuration >> Windows Settings >> Security Settings >> Local Policies >> Security Options >> System objects: Strengthen default permissions of internal system objects (e.g., Symbolic Links) to "Enabled". | ||||||||||||||||||||||||
| Severity: | low | ||||||||||||||||||||||||
| Weight: | 10.0 | ||||||||||||||||||||||||
| Reference: |
| ||||||||||||||||||||||||
| Definitions: |
| ||||||||||||||||||||||||
| Tests: |
|
V-278002 - Windows Server 2025 nonadministrative accounts or groups must only have print permissions on printer shares.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278002r1181785_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000180 | ||||||||||
| Identities: | CCI-000213 (NIST SP 800-53: AC-3; NIST SP 800-53A: AC-3.1; NIST SP 800-53 Rev 4: AC-3; NIST SP 800-53 Rev 5: AC-3) | ||||||||||
| Description: | Windows shares are a means by which files, folders, printers, and other resources can be published for network users to access. Improper configuration can permit access to devices and data beyond a user's need. | ||||||||||
| Check Text: | Open "Printers & scanners" in "Settings". If there are no printers configured, this is not applicable. (Exclude Microsoft Print to PDF and Microsoft XPS Document Writer, which do not support sharing.) For each printer: Select the printer and "Manage". Select "Printer Properties". Select the "Sharing" tab. If "Share this printer" is checked, select the "Security" tab. If any standard user accounts or groups have permissions other than "Print", this is a finding. The default is for the "Everyone" group to be given Print permission. "All APPLICATION PACKAGES" and "CREATOR OWNER" are not standard user accounts. | ||||||||||
| Fix Text: | Configure the permissions on shared printers to restrict standard users to only have Print permissions. | ||||||||||
| Severity: | low | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|
V-278029 - The Windows Server 2025 time service must synchronize with an appropriate DoW time source.
| Rule ID: | xccdf_mil.disa.stig_rule_SV-278029r1256714_rule | ||||||||||
| Test Type: | Manual | ||||||||||
| Rule Result: | Not Checked | ||||||||||
| Version: | WN25-00-000440 | ||||||||||
| Identities: | CCI-004923 (NIST SP 800-53 Rev 5: SC-45 (1) (a)) CCI-004922 (NIST SP 800-53 Rev 5: SC-45) | ||||||||||
| Description: | The Windows Time Service controls time synchronization settings. Time synchronization is essential for authentication and auditing purposes. If the Windows Time Service is used, it must synchronize with a secure, authorized time source. Domain-joined systems are automatically configured to synchronize with domain controllers. If an NTP server is configured, it must synchronize with a secure, authorized time source. Satisfies: SRG-OS-000785-GPOS-000250. | ||||||||||
| Check Text: | Review the Windows time service configuration. Open an elevated command prompt (run as administrator). Enter "W32tm /query /configuration". Domain-joined systems (excluding the domain controller with the PDC emulator role): If the value for "Type" under "NTP Client" is not "NT5DS", this is a finding. Other systems: If systems are configured with a "Type" of "NTP", including stand-alone or nondomain-joined systems and the domain controller with the PDC Emulator role, and do not have a DoW time server defined for "NTPServer", this is a finding. To determine the domain controller with the PDC Emulator role: Open PowerShell. Enter "Get-ADDomain | FT PDCEmulator". | ||||||||||
| Fix Text: | Configure the system to synchronize time with an appropriate DoW time source. Domain-joined systems use NT5DS to synchronize time from other systems in the domain by default. If needed, configure the system to point to an authorized time server by setting the policy value for Computer Configuration >> Administrative Templates >> System >> Windows Time Service >> Time Providers. Change "Configure Windows NTP Client" to "Enabled" and configure the "NtpServer" field to point to an appropriate DoW time server. The US Naval Observatory operates stratum one-time servers, identified at https://www.usno.navy.mil/USNO/time/ntp/DOD-customers. Time synchronization will occur through a hierarchy of time servers down to the local level. Clients and lower-level servers will synchronize with an authorized time server in the hierarchy. | ||||||||||
| Severity: | low | ||||||||||
| Weight: | 10.0 | ||||||||||
| Reference: |
| ||||||||||
| Questionnaires: |
| ||||||||||
| Criteria: |
|